Sökning: onr:"swepub:oai:DiVA.org:ri-42167" >
Characterisation of...
Characterisation of EBM-built shelled samples of Ti6Al4V compacted by HIP
-
- Frisk, Karin (författare)
- RISE,KIMAB,Swerea KIMAB, Kista
-
- Rännar, Lars-Erik (författare)
- Mittuniversitetet,Avdelningen för kvalitetsteknik, maskinteknik och matematik,Sports Tech Research Centre,Mid Sweden University
-
- Koptyug, Andrey (författare)
- Mittuniversitetet,Avdelningen för kvalitetsteknik, maskinteknik och matematik,Sports Tech Research Centre,Mid Sweden University
-
visa fler...
-
- Petterson, Niklas (författare)
- RISE,KIMAB,Swerea KIMAB, Kista
-
- Persson, Daniel (författare)
- RISE,KIMAB,Swerea KIMAB, Kista
-
- Leicht, Alexander, 1987 (författare)
- Chalmers University of Technology, Sweden,Chalmers tekniska högskola,Quintus Technologies AB
-
- Vattur Sundaram, Maheswaran, 1987 (författare)
- Chalmers University of Technology, Sweden,Chalmers tekniska högskola
-
- Hryha, Eduard, 1980 (författare)
- Chalmers University of Technology, Sweden,Chalmers tekniska högskola
-
- Nyborg, Lars, 1958 (författare)
- Chalmers University of Technology, Sweden,Chalmers tekniska högskola
-
- Ahlfors, M. (författare)
- Quintus Technologies, Sweden,Quintus Technologies, Västerås
-
visa färre...
-
(creator_code:org_t)
- European Powder Metallurgy Association (EPMA), 2016
- 2016
- Engelska.
-
Ingår i: World PM 2016 Congress and Exhibition. - : European Powder Metallurgy Association (EPMA). - 9781899072484
- Relaterad länk:
-
https://urn.kb.se/re...
-
visa fler...
-
https://urn.kb.se/re...
-
https://research.cha...
-
visa färre...
Abstract
Ämnesord
Stäng
- Compaction of additively manufactured Ti6Al4V components by Hot Isostatic Pressing (HIP) is often applied to eliminate porosity, producing fully dense material. In the present work shelled samples produced by Electron Beam Melting with the Arcam process (EBM) were compacted by HIP to produce fully dense samples. Cylindrical samples were studied. The walls of the cylinders were built with EBM, and the powder from the process was left uncompacted inside the cylinders. Samples with different wall thicknesses were produced. The samples were thereafter subjected to a HIP compaction. The critical wall thicknesses needed for compaction were evaluated, and the microstructures characterized. The results show that fully dense samples, with very fine microstructures, are possible.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Materialteknik -- Metallurgi och metalliska material (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Materials Engineering -- Metallurgy and Metallic Materials (hsv//eng)
- TEKNIK OCH TEKNOLOGIER -- Materialteknik -- Bearbetnings-, yt- och fogningsteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Materials Engineering -- Manufacturing, Surface and Joining Technology (hsv//eng)
Nyckelord
- Aluminum alloys
- Aluminum compounds
- Compaction
- Cylinders (shapes)
- Hot isostatic pressing
- Microstructure
- Powder metallurgy
- Powders
- Titanium alloys
- Titanium compounds
- Cylindrical samples
- Dense materials
- Fine microstructure
- Ti-6al-4v
- Wall thickness
- Walls (structural partitions)
Publikations- och innehållstyp
- ref (ämneskategori)
- kon (ämneskategori)
Hitta via bibliotek
Till lärosätets databas
- Av författaren/redakt...
-
Frisk, Karin
-
Rännar, Lars-Eri ...
-
Koptyug, Andrey
-
Petterson, Nikla ...
-
Persson, Daniel
-
Leicht, Alexande ...
-
visa fler...
-
Vattur Sundaram, ...
-
Hryha, Eduard, 1 ...
-
Nyborg, Lars, 19 ...
-
Ahlfors, M.
-
visa färre...
- Om ämnet
-
- TEKNIK OCH TEKNOLOGIER
-
TEKNIK OCH TEKNO ...
-
och Materialteknik
-
och Metallurgi och m ...
-
- TEKNIK OCH TEKNOLOGIER
-
TEKNIK OCH TEKNO ...
-
och Materialteknik
-
och Bearbetnings yt ...
- Artiklar i publikationen
-
World PM 2016 Co ...
- World Powder Met ...
- Av lärosätet
-
RISE
-
Mittuniversitetet
-
Chalmers tekniska högskola