Sökning: onr:"swepub:oai:DiVA.org:ri-72805" >
Metrology infrastru...
Metrology infrastructure for high-pressure gas and liquified hydrogen flows. A brief outline of the MetHyInfra project, measurement challenges, and first results
-
- Böckler, H B (författare)
- PTB, Germany
-
- de Huu, M. (författare)
- METAS, Switzerland
-
- Maury, R. (författare)
- CECAME, France
-
visa fler...
-
- Schmelter, S. (författare)
- PTB, Germany
-
- Schakel, M. D. (författare)
- VSL, Netherlands
-
- Büker, Oliver (författare)
- RISE,Mätteknik
-
- Kutin, J. (författare)
- University of Ljubljana, Slovenia
-
- Bobovnik, G. (författare)
- University of Ljubljana, Slovenia
-
- Wedler, C. (författare)
- Imperial College London, UK
-
- Trusler, J. P. M. (författare)
- Imperial College London, UK
-
- Thol, M. (författare)
- Ruhr-University Bochum, Germany
-
- Weiss, S. (författare)
- PTB, Germany
-
- Günz, C. (författare)
- PTB, Germany
-
- Schumann, D. (författare)
- PTB, Germany
-
- Gugole, F. (författare)
- VSL, Netherlands
-
visa färre...
-
(creator_code:org_t)
- Elsevier B.V. 2024
- 2024
- Engelska.
-
Ingår i: Measurement. - : Elsevier B.V.. - 0263-2241 .- 1873-412X. ; 232
- Relaterad länk:
-
https://doi.org/10.1...
-
visa fler...
-
https://ri.diva-port... (primary) (Raw object)
-
https://urn.kb.se/re...
-
https://doi.org/10.1...
-
visa färre...
Abstract
Ämnesord
Stäng
- This paper gives an overview of the ongoing Joint Research Project (JRP) 20IND11 “Metrology infrastructure for high pressure gas and liquefied hydrogen flows” (MetHyInfra), which will ensure traceability in the hydrogen distribution chain. For this purpose, very precise nozzles with well-defined geometries have been produced. In this project, Critical Flow Venturi Nozzles (CFVNs) will be traceably calibrated for the first time with hydrogen and pressures up to 100 MPa using a Coriolis Flow Meter (CFM) as a secondary standard. A CFM has been successfully calibrated with hydrogen against a gravimetric primary standard. Equations of State (EoS) are important for the high-pressure calibration of the nozzles, but also for Computational Fluid Dynamics (CFD) simulations. With regard to CFD, a numerical model has been developed to simulate high pressure hydrogen flow in the CFVN. In a parameter study, non-ideal nozzle shapes are investigated using a shape variation parameter. New Speed of Sound (SoS) measurements were conducted at temperatures from 273 to 323 K and pressures from 1 to 100 MPa. These new data were then used to develop a new EoS for normal hydrogen, optimized for gas phase calculations. In addition to gaseous hydrogen, the project has a strong focus on liquefied hydrogen. Here a three-pronged approach allows traceable measurements. Each of the approaches presented is based on a unique flow calibration principle and relies on independent traceability schemes. The results of the project will ensure traceable measurements and thus a higher level of confidence among end users. © 2024 The Authors
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Maskinteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Mechanical Engineering (hsv//eng)
Nyckelord
- Calibration; Computational fluid dynamics; Equations of state; Flow measurement; Flowmeters; Liquefied gases; Nozzles; Coriolis flowmeters; Critical flow venturi nozzles; Distribution chains; Equation-of-state; High pressure gas; Hydrogen distribution; Hydrogen flow; Liquified hydrogen; Primary standards; Secondary standard; Hydrogen
Publikations- och innehållstyp
- ref (ämneskategori)
- art (ämneskategori)
Hitta via bibliotek
Till lärosätets databas
- Av författaren/redakt...
-
Böckler, H B
-
de Huu, M.
-
Maury, R.
-
Schmelter, S.
-
Schakel, M. D.
-
Büker, Oliver
-
visa fler...
-
Kutin, J.
-
Bobovnik, G.
-
Wedler, C.
-
Trusler, J. P. M ...
-
Thol, M.
-
Weiss, S.
-
Günz, C.
-
Schumann, D.
-
Gugole, F.
-
visa färre...
- Om ämnet
-
- TEKNIK OCH TEKNOLOGIER
-
TEKNIK OCH TEKNO ...
-
och Maskinteknik
- Artiklar i publikationen
-
Measurement
- Av lärosätet
-
RISE