Sökning: onr:"swepub:oai:DiVA.org:uu-409754" >
Additively manufact...
Additively manufactured mesh-type titanium structures for cranial implants : E-PBF vs. L-PBF
-
- Lewin, Susanne (författare)
- Uppsala universitet,Tillämpad materialvetenskap
-
- Fleps, Ingmar (författare)
- ETH Zurich
-
- Åberg, Jonas, 1982- (författare)
- Uppsala universitet,Tillämpad materialvetenskap
-
visa fler...
-
- Ferguson, Stephen J. (författare)
- ETH Zurich
-
- Engqvist, Håkan, 1972- (författare)
- Uppsala universitet,Tillämpad materialvetenskap
-
- Öhman-Mägi, Caroline (författare)
- Uppsala universitet,Tillämpad materialvetenskap
-
- Helgason, Benedikt (författare)
- ETH Zurich
-
- Persson, Cecilia (författare)
- Uppsala universitet,Tillämpad materialvetenskap
-
visa färre...
-
(creator_code:org_t)
- Elsevier, 2021
- 2021
- Engelska.
-
Ingår i: Materials & design. - : Elsevier. - 0264-1275 .- 1873-4197. ; 197
- Relaterad länk:
-
https://doi.org/10.1...
-
visa fler...
-
https://uu.diva-port... (primary) (Raw object)
-
https://doi.org/10.1...
-
https://urn.kb.se/re...
-
https://doi.org/10.1...
-
visa färre...
Abstract
Ämnesord
Stäng
- A patient-specific titanium-reinforced calcium phosphate (CaP–Ti) cranial implant has recently shown promising clinical results. Currently, its mesh-type titanium structure is additively manufactured using laser beam powder bed fusion (L-PBF). Nevertheless, an electron-beam (E-PBF) process could potentially be more time efficient. This study aimed to compare the geometrical accuracy and mechanical response of thin titanium structures manufactured by L-PBF (HIPed) and E-PBF (as-printed). Tensile test (ø = 1.2 mm) and implant specimens were manufactured. Measurements by μCT revealed a deviation in cross-sectional area as compared to the designed geometry: 13–35% for E-PBF and below 2% for L-PBF. A superior mechanical strength was obtained for the L-PBF specimens, both in the tensile test and the implant compression tests. The global peak load in the implant test was 457 ± 9 N and 846 ± 40 N for E-PBF and L-PBF, respectively. Numerical simulations demonstrated that geometrical deviation was the main factor in implant performance and enabled quantification of this effect: 34–39% reduction in initial peak force based on geometry, and only 11–16% reduction based on the material input. In summary, the study reveals an uncertainty in accuracy when structures of sizes relevant to mesh-type cranial implants are printed by the E-PBF method.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Medicinteknik -- Medicinsk material- och protesteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Medical Engineering -- Medical Materials (hsv//eng)
Nyckelord
- Additive manufacturing
- Electron beam melting
- Powder bed fusion
- Finite element models
- Surface roughness
- Cranial implant
- Engineering Science with specialization in Materials Science
- Teknisk fysik med inriktning mot materialvetenskap
Publikations- och innehållstyp
- ref (ämneskategori)
- art (ämneskategori)
Hitta via bibliotek
Till lärosätets databas
- Av författaren/redakt...
-
Lewin, Susanne
-
Fleps, Ingmar
-
Åberg, Jonas, 19 ...
-
Ferguson, Stephe ...
-
Engqvist, Håkan, ...
-
Öhman-Mägi, Caro ...
-
visa fler...
-
Helgason, Benedi ...
-
Persson, Cecilia
-
visa färre...
- Om ämnet
-
- TEKNIK OCH TEKNOLOGIER
-
TEKNIK OCH TEKNO ...
-
och Medicinteknik
-
och Medicinsk materi ...
- Artiklar i publikationen
-
Materials & desi ...
- Av lärosätet
-
Uppsala universitet