Sökning: onr:"swepub:oai:lup.lub.lu.se:bdf98c5e-3025-4af9-a0b1-e49f1a6df0ef" >
Numerical study of ...
Numerical study of turbulent forced convection in a finned tube with and without CuO nano fluid
-
- Abbood, Sahar (författare)
- Lund University,Lunds universitet,Värmeöverföring,Institutionen för energivetenskaper,Institutioner vid LTH,Lunds Tekniska Högskola,Heat Transfer,Department of Energy Sciences,Departments at LTH,Faculty of Engineering, LTH
-
- Sundén, Bengt (författare)
- Lund University,Lunds universitet,Institutionen för energivetenskaper,Institutioner vid LTH,Lunds Tekniska Högskola,Department of Energy Sciences,Departments at LTH,Faculty of Engineering, LTH
-
(creator_code:org_t)
- 2016
- 2016
- Engelska 19 s.
-
Ingår i: International Journal of Numerical Methods for Heat & Fluid Flow. - 0961-5539. ; 26:7, s. 2252-2270
- Relaterad länk:
-
http://www.emeraldin...
-
visa fler...
-
http://dx.doi.org/10...
-
https://lup.lub.lu.s...
-
https://doi.org/10.1...
-
visa färre...
Abstract
Ämnesord
Stäng
- Purpose - The purpose of this paper is to carry out a numerical investigation to study forced convection for a tube with fins on the inner and outer surfaces with water as the base fluid and adding particles of CuO to have a nanofluid. Design/methodology/approach - Three geometries are designed by using Solid Works and the number of inside fins is 20 with height 6 mm and thickness 1mm. The number of outside fins is 20 with height 12mm and thickness 1 mm. The length of the tube is 1,000mmand the inner and outer diameter is 26 and 28mm, respectively. The annular diameter is 60mm. The geometries are imported to Gambit where the mesh is chosen and the boundary conditions are specified. The commercial software package Fluent version 14.0 has been used to numerically solve the governing equations for the three cases. Findings - The temperature contours for the three models at different air velocities, i.e., 5, 7.5 and 10 m/s and water velocities 0.8, 1 and 3 m/s have been investigated. The enhancement of heat transfer by using CuO nanoparticles has been investigated at different nanofluid concentrations. Originality/value - In this paper, a numerical study is presented to analyze internal and external longitudinal finned tubes with water inside and air outside, with and without nano CuO particles.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Maskinteknik -- Energiteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Mechanical Engineering -- Energy Engineering (hsv//eng)
Publikations- och innehållstyp
- art (ämneskategori)
- ref (ämneskategori)
Hitta via bibliotek
Till lärosätets databas