SwePub
Sök i LIBRIS databas

  Utökad sökning

onr:"swepub:oai:research.chalmers.se:519c2f10-737c-4bd0-9007-a4a64d10422b"
 

Sökning: onr:"swepub:oai:research.chalmers.se:519c2f10-737c-4bd0-9007-a4a64d10422b" > Modeling the motion...

  • Köhler, Anna,1989Chalmers tekniska högskola,Chalmers University of Technology (författare)

Modeling the motion of fuel particles in a fluidized bed

  • Artikel/kapitelEngelska2021

Förlag, utgivningsår, omfång ...

  • Elsevier BV,2021
  • electronicrdacarrier

Nummerbeteckningar

  • LIBRIS-ID:oai:research.chalmers.se:519c2f10-737c-4bd0-9007-a4a64d10422b
  • https://doi.org/10.1016/j.fuel.2021.121424DOI
  • https://research.chalmers.se/publication/525370URI

Kompletterande språkuppgifter

  • Språk:engelska
  • Sammanfattning på:engelska

Ingår i deldatabas

Klassifikation

  • Ämneskategori:art swepub-publicationtype
  • Ämneskategori:ref swepub-contenttype

Anmärkningar

  • A semiempirical model for the mixing of fuel particles in a fluidized bed is presented and validated against experimental data from the literature regarding lateral fuel mixing. The model of fuel particle mixing categorizes the fluidized bed into three mixing zones: a rising bubble wake solid zone, an emulsion zone with sinking bulk solids, and a splash zone located above the dense bed. In the emulsion zone, the axial motion of the fuel particle is described by a force balance, applying a viscoplastic stress model, i.e., with a dominant yield stress and only a minor contribution of the shear stress, using an empirical expression from the literature. In the lateral direction, the model is divided into so-called ‘recirculation cells’, which are crucial for the lateral mixing. Comparisons of the modeled and measured lateral dispersion coefficients of different fuel types measured in three different large-scale fluidized bed units under both hot and cold conditions (covering a broad range of coefficients: 10−4–10−1 m2/s) reveal satisfactory agreement. The validated model was used to investigate how the lateral mixing of fuel particles depends on the excess gas velocity, the bed height, and the lateral distribution of bubbles over the bed cross-section (which is typically uneven in industrial FB furnaces), as well as the size and density of the fuel particles.

Ämnesord och genrebeteckningar

Biuppslag (personer, institutioner, konferenser, titlar ...)

  • Cano-Pleite, E.Universidad Carlos Iii De Madrid (författare)
  • Soria-Verdugo, AntonioUniversidad Carlos Iii De Madrid (författare)
  • Pallarès, David,1975Chalmers tekniska högskola,Chalmers University of Technology(Swepub:cth)djpt (författare)
  • Johnsson, Filip,1960Chalmers tekniska högskola,Chalmers University of Technology(Swepub:cth)fijo (författare)
  • Chalmers tekniska högskolaUniversidad Carlos Iii De Madrid (creator_code:org_t)

Sammanhörande titlar

  • Ingår i:Fuel: Elsevier BV3050016-2361

Internetlänk

Hitta via bibliotek

  • Fuel (Sök värdpublikationen i LIBRIS)

Till lärosätets databas

Sök utanför SwePub

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy