Sökning: onr:"swepub:oai:research.chalmers.se:970b80ef-3b1a-4642-9e97-c51022bc792c" >
Modelling cracking ...
Modelling cracking and bending failure of SFRC beams with conventional reinforcement
-
- Fall, David, 1983 (författare)
- Chalmers tekniska högskola,Chalmers University of Technology
-
- Rempling, Rasmus, 1976 (författare)
- Chalmers tekniska högskola,Chalmers University of Technology
-
- Jansson, Anette M, 1963 (författare)
- Chalmers tekniska högskola,Chalmers University of Technology
-
visa fler...
-
- Lundgren, Karin, 1968 (författare)
- Chalmers tekniska högskola,Chalmers University of Technology
-
visa färre...
-
(creator_code:org_t)
- ISBN 9788494100413
- 2013
- 2013
- Engelska.
-
Ingår i: 8th International Conference on Fracture Mechanics of Concrete and Concrete Structures. - 9788494100413 ; , s. 1276-1285
- Relaterad länk:
-
http://publications.... (primary) (free)
-
visa fler...
-
https://research.cha...
-
visa färre...
Abstract
Ämnesord
Stäng
- In this study three beams, with varying contents of steel fibre reinforcement, were tested in four point bending and compared with results from FE-analysis. The beams were part of a larger experimental programme where relevant material properties were investigated. FE-modelling was performed using a two dimensional model. Concrete was represented by four-node quadrilateral isoperimetric plane stress elements. The smeared crack approach was utilized and the stress-strain relation describing the tensile behavior of the concrete was calculated from uni-axial test results, assuming the crack bandwidth to be equal to the element length. In compression, the concrete was assumed to behave elasto ideal-plastic. The reinforcement was modelled by straight 2-node truss elements connected to the concrete by two-dimensional interface elements providing the bond-slip properties. A material model including hardening effects was derived from tension tests of reinforcement bars and used for modelling the conventional reinforcement. A multi-linear bond-slip model was established through pull-out tests. As an alternative, analyses were also performed taking into account a reduction of the bond stress after yielding of the reinforcement occurred. Loading was applied in two phases: the first comprehending only the self-weight, while incremental loading was applied by deformation control during the second phase. General agreement between experiments and FE-analyses was obtained with regard to load-displacement behaviour. By observing the crack patterns, both from FE-analysis and experiments, it can be concluded that the general behaviour agreed; however, in the analyses not all cracks were fully localized. A higher degree of crack localization was obtained when the bond loss at yielding was included.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Samhällsbyggnadsteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Civil Engineering (hsv//eng)
- TEKNIK OCH TEKNOLOGIER -- Samhällsbyggnadsteknik -- Annan samhällsbyggnadsteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Civil Engineering -- Other Civil Engineering (hsv//eng)
Nyckelord
- Reinforced concrete beams
- Non-linear FE-modelling
- Fib Model Code 2010
- Steel fibre reinforced concrete
Publikations- och innehållstyp
- kon (ämneskategori)
- ref (ämneskategori)
Hitta via bibliotek
Till lärosätets databas