SwePub
Sök i LIBRIS databas

  Utökad sökning

onr:"swepub:oai:research.chalmers.se:b9ef16c7-e932-4ad0-8fbc-42745a0b99bd"
 

Sökning: onr:"swepub:oai:research.chalmers.se:b9ef16c7-e932-4ad0-8fbc-42745a0b99bd" > Incorporation of gr...

  • Mahade, Satyapal,1987-Högskolan Väst,Avdelningen för avverkande och additativa tillverkningsprocesser (AAT),PTW (författare)

Incorporation of graphene nano platelets in suspension plasma sprayed alumina coatings for improved tribological properties

  • Artikel/kapitelEngelska2021

Förlag, utgivningsår, omfång ...

  • Elsevier BV,2021

Nummerbeteckningar

  • LIBRIS-ID:oai:research.chalmers.se:b9ef16c7-e932-4ad0-8fbc-42745a0b99bd
  • https://research.chalmers.se/publication/526028URI
  • https://doi.org/10.1016/j.apsusc.2021.151227DOI
  • https://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-17510URI

Kompletterande språkuppgifter

  • Språk:engelska
  • Sammanfattning på:engelska

Ingår i deldatabas

Klassifikation

  • Ämneskategori:art swepub-publicationtype
  • Ämneskategori:ref swepub-contenttype

Anmärkningar

  • The authors gratefully acknowledge financial support received from the national Strategic Innovation Programme for graphene, SIO Grafen, supporting the industrial graphene development in Sweden. The programme is supported by the Swedish government agencies Vinnova (Sweden’s Innovation Agency), the Swedish Energy Agency and the Swedish Research Council Formas. The project grant nr. is Dnr 2018-03315. We also thank Mr. Sven Forsberg, 2DFab AB, Sweden, for providing the water-based GNP suspension.
  • Graphene possesses high fracture toughness and excellent lubrication properties, which can be exploited to enhance tribological performance of coating systems utilized to combat wear. In this work, suspension plasma spray (SPS) process was employed to deposit a composite, graphene nano-platelets (GNP) incorporated alumina coating. For comparison, monolithic alumina was also deposited utilizing identical spray conditions. The as-deposited coatings were characterized in detail for their microstructure, porosity content, hardness, fracture toughness and phase composition. Raman analysis of the as-deposited composite coating confirmed retention of GNP. The composite coating also showed good microstructural integrity, comparable porosity, higher fracture toughness and similar alumina phase composition as the monolithic alumina coating. The as-deposited coatings were subjected to dry sliding wear tests. The GNP incorporated composite coating showed lower CoF and lower specific wear rate than the pure alumina coating. Additionally, the counter surface also showed a lower wear rate in case of the composite coating. Post-wear analysis performed by SEM/EDS showed differences in the coating wear track and in the ball wear track of monolithic and composite coatings. Furthermore, Raman analysis in the wear track of composite coating confirmed the presence of GNP. The micro-indentation and wear test results indicate that the presence of GNP in the composite coating aided in improving fracture toughness, lowering CoF and specific wear rate compared to the monolithic coating. Results from this work demonstrated retention of GNP in an SPS processed coating, which can be further exploited to design superior wear-resistant coatings.

Ämnesord och genrebeteckningar

Biuppslag (personer, institutioner, konferenser, titlar ...)

  • Mulone, Antonio,1989Chalmers tekniska högskola,Chalmers University of Technology,Department of Industrial and Materials Science, Chalmers University of Technology, Gothenburg (SWE)(Swepub:cth)mulone (författare)
  • Björklund, Stefan,1969-Högskolan Väst,Avdelningen för avverkande och additativa tillverkningsprocesser (AAT),PTW(Swepub:hv)tsb (författare)
  • Klement, Uta,1962Chalmers tekniska högskola,Chalmers University of Technology,Department of Industrial and Materials Science, Chalmers University of Technology, Gothenburg (SWE)(Swepub:cth)uk (författare)
  • Joshi, Shrikant V.,1960-Högskolan Väst,Avdelningen för avverkande och additativa tillverkningsprocesser (AAT),Forskningsmiljön produktionsteknik(PTW),PTW(Swepub:hv)shrjos (författare)
  • Högskolan VästAvdelningen för avverkande och additativa tillverkningsprocesser (AAT) (creator_code:org_t)

Sammanhörande titlar

  • Ingår i:Applied Surface Science: Elsevier BV5700169-43321873-5584

Internetlänk

Hitta via bibliotek

Till lärosätets databas

Sök utanför SwePub

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy