Sökning: onr:"swepub:oai:research.chalmers.se:be9d0243-b73a-48c7-aa31-d8031f3a1be6" >
Reducing train-indu...
Reducing train-induced ground-borne vibration by vehicle design and maintenance
-
- Nielsen, Jens, 1963 (författare)
- Chalmers tekniska högskola,Chalmers University of Technology
-
- Mirza, A. (författare)
- Bombardier Transportation
-
- Cervello, S. (författare)
- Lucchini RS
-
visa fler...
-
Huber, P. (författare)
-
Müller, R. (författare)
-
Nelain, B. (författare)
-
- Ruest, P. (författare)
- Bombardier Transportation (Switzerland) AG
-
visa färre...
-
(creator_code:org_t)
- 2015-02-13
- 2015
- Engelska.
-
Ingår i: International Journal of Rail Transportation. - : Informa UK Limited. - 2324-8386 .- 2324-8378. ; 3:1, s. 17-39
- Relaterad länk:
-
http://dx.doi.org/10...
-
visa fler...
-
https://doi.org/10.1...
-
https://research.cha...
-
visa färre...
Abstract
Ämnesord
Stäng
- Wheel out-of-roundness (OOR) and unsprung mass are key railway vehicle parameters influencing the dynamic wheel?rail contact loads and inducing ground-borne vibration. For a given combination of vehicle speed, track/soil conditions and wheel/rail irregularity level, reducing the unsprung mass leads to a reduction in contact loads and vibration at frequencies above the resonance of the wheelset on the primary suspension. Guidelines for reducing unsprung mass are presented, including alternative designs for the wheelset and the suspension of the mechanical drive system. For locomotives and powered bogies, the potential for reduced vibration level is 2-4 dB by improving the drive suspension design. Based on an extensive field measurement campaign, where the influence of several different types of vehicle on vibration level was measured, it was found that the maximum vibration levels were generated by freight locomotives. For several freight locomotives of the same type, a high statistical variance (up to 20 dB) in measured vibration level was observed indicating a significant spread in wheel tread conditions and OOR. Early detection of out-of-round wheels and corrective wheel maintenance are important measures to reduce vibration levels.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Maskinteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Mechanical Engineering (hsv//eng)
Nyckelord
- Field measurement
- Wheel out-of-roundness
- Railway vehicle design
- Maintenance
- Ground-borne vibration
- Unsprung mass
Publikations- och innehållstyp
- art (ämneskategori)
- ref (ämneskategori)
Hitta via bibliotek
Till lärosätets databas