| 1. |
- Feierabend, Maja, 1990, et al.
(author)
-
Optical fingerprint of non-covalently functionalized transition metal dichalcogenides
- 2017
-
In: Journal of Physics Condensed Matter. - 0953-8984 .- 1361-648X. ; 29:38, s. Article no 384003 -
-
Journal article (peer-reviewed)abstract
- Atomically thin transition metal dichalcogenides (TMDs) hold promising potential forapplications in optoelectronics. Due to their direct band gap and the extraordinarily strong Coulomb interaction, TMDs exhibit efficient light-matter coupling and tightly bound excitons. Moreover, large spin orbit coupling in combination with circular dichroism allows for spin and valley selective optical excitation. As atomically thin materials, they are very sensitive to changes in the surrounding environment. This motivates a functionalization approach, where external molecules are adsorbed to the materials surface to tailor its optical properties. Here, we apply the density matrix theory to investigate the potential of non-covalently functionalized monolayer TMDs. Considering exemplary molecules with a strong dipole moment, we predict spectral redshifts and the appearance of an additional side peak in the absorption spectrum of functionalized TMDs. We show that the molecular characteristics, e.g. coverage, orientation and dipole moment, crucially influence the optical properties of TMDs, leaving a unique optical fingerprint in the absorption spectrum. Furthermore, we find that the molecular dipole moments open a channel for coherent intervalley coupling between the high-symmetry K and K' points which may create new possibilities for spin-valleytronics application.
|
|
| 2. |
- Gryglas-Borysiewicz, Marta, et al.
(author)
-
Hydrostatic-pressure-induced changes of magnetic anisotropy in (Ga, Mn) As thin films
- 2017
-
In: Journal of Physics. - : Institute of Physics Publishing (IOPP). - 0953-8984 .- 1361-648X. ; 29:11
-
Journal article (peer-reviewed)abstract
- The impact of hydrostatic pressure on magnetic anisotropy energies in (Ga, Mn) As thin films with in-plane and out-of-plane magnetic easy axes predefined by epitaxial strain was investigated. In both types of sample we observed a clear increase in both in-plane and out-of-plane anisotropy parameters with pressure. The out-of-plane anisotropy constant is well reproduced by the mean-field p-d Zener model; however, the changes in uniaxial anisotropy are much larger than expected in the Mn-Mn dimer scenario.
|
|
| 3. |
- Hejral, Uta, et al.
(author)
-
High energy surface x-ray diffraction applied to model catalyst surfaces at work
- 2021
-
In: Journal of Physics: Condensed Matter. - 1361-648X. ; 33:7, s. 73001-73001
-
Journal article (peer-reviewed)abstract
- Catalysts are materials that accelerate the rate of a desired chemical reaction. As such, they constitute an integral part in many applications ranging from the production of fine chemicals in chemical industry to exhaust gas treatment in vehicles. Accordingly, it is of utmost economic interest to improve catalyst efficiency and performance, which requires an understanding of the interplay between the catalyst structure, the gas phase and the catalytic activity under realistic reaction conditions at ambient pressures and elevated temperatures. In recent years efforts have been made to increasingly develop techniques that allow for investigating model catalyst samples under conditions closer to those of real technical catalysts. One of these techniques is high energy surface x-ray diffraction (HESXRD), which uses x-rays with photon energies typically in the range of 70-80 keV. HESXRD allows a fast data collection of three dimensional reciprocal space for the structure determination of model catalyst samples under operando conditions and has since been used for the investigation of an increasing number of different model catalysts. In this article we will review general considerations of HESXRD including its working principle for different model catalyst samples and the experimental equipment required. An overview over HESXRD investigations performed in recent years will be given, and the advantages of HESXRD with respect to its application to different model catalyst samples will be presented. Moreover, the combination of HESXRD with other operando techniques such as in situ mass spectrometry, planar laser-induced fluorescence and surface optical reflectance will be discussed. The article will close with an outlook on future perspectives and applications of HESXRD.
|
|
| 4. |
- Huang, S. W., et al.
(author)
-
Polaronic effect in the x-ray absorption spectra of La 1-x Ca x MnO 3 manganites
- 2019
-
In: Journal of Physics: Condensed Matter. - 1361-648X. ; 31:19
-
Journal article (peer-reviewed)abstract
- X-ray absorption spectroscopy (XAS) is performed to study changes in the electronic structures of colossal magnetoresistance (CMR) and charged ordered (CO) La1-x Ca x MnO3 manganites with respect to temperature. The pre-edge features in O and Mn K-edge XAS spectra, which are highly sensitive to the local distortion of MnO6 octahedral, exhibit contrasting temperature dependence between CMR and CO samples. The seemingly counter-intuitive XAS temperature dependence can be reconciled in the context of polarons. These results help identify the most relevant orbital states associated with polarons and highlight the crucial role played by polarons in understanding the electronic structures of manganites.
|
|
| 5. |
- Johansson, Niclas, et al.
(author)
-
Ambient pressure phase transitions over Ir(1 1 1): at the onset of CO oxidation
- 2017
-
In: Journal of Physics: Condensed Matter. - 1361-648X. ; 29:44
-
Journal article (peer-reviewed)abstract
- In this study we report on the adsorbate structures on an Ir(1 1 1) surface during the phase transition from the inactive to the active state during CO oxidation. The CO oxidation over Pt(1 1 1) is used as a reference case. Where Pt(1 1 1) either is inactive and CO covered or active and O covered, Ir(1 1 1) exhibits a transition state with co-existing chemisorbed O and CO. The observed structural differences are explained in terms of DFT-calculated adsorption energies. For Pt(1 1 1) the repulsive CO–O interaction makes co-existing chemisorbed CO and O unfavourable, while for Ir(1 1 1) the stronger O and CO adsorption allows for overcoming the repulsive interaction. At the onset of CO oxidation over Ir(1 1 1), a CO structure containing defects forms, which enables O2 to dissociatively adsorb on the Ir(1 1 1) surface, thus enabling the CO oxidation reaction. At the mass transfer limit, the Ir(1 1 1) surface is covered by a chemisorbed O structure with defects; hence, the active surface is predominately chemisorbed O covered at a total pressure of 0.5 mbar and no oxide formation is observed.
|
|
| 6. |
- Johansson, Niclas, et al.
(author)
-
Sonogashira cross-coupling over Au(1 1 1): from UHV to ambient pressure
- 2017
-
In: Journal of Physics: Condensed Matter. - 1361-648X. ; 29:44
-
Journal article (peer-reviewed)abstract
- We have studied the reaction of phenylacetylene (PA) with chloro-, bromo-, and iodobenzene on the Au(1 1 1) surface as a model system for the gold-catalysed Sonogashira cross-coupling. Both ultrahigh vacuum-based and ambient pressure x-ray photoelectron spectroscopy show that iodo- and chlorobenzene (IB and CB) undergo the cross-coupling reaction towards diphenylacetylene. Bromobenzene (BB), in contrast, does not react in the UHV experiments. Further, at ambient pressure signs are found for poisoning of the Au(1 1 1) surface by a carbon species formed in the reaction. The understanding obtained in the reaction experiments are based on a thorough investigation of the adsorption of PA, IB, CB, and BB on the Au(1 1 1) surface by soft x-ray absorption spectroscopy and temperature-dependent x-ray photoelectron spectroscopy. In particular, the experiments provide the orientation of the intact adsorbates with respect to the surfaces at liquid nitrogen temperature. Dissociation in the temperature regime between −80 and −15 °C is observed for iodo- and chlorobenzene, but not for BB, in agreement with that only IB and CB, but not BB, react with PA to form diphenylacetylene. The difference is tentatively attributed to a difference in surface orientation of the different halobenzenes.
|
|
| 7. |
- John Mukkattukavil, Deepak, et al.
(author)
-
Resonant inelastic soft x-ray scattering on LaPt2Si2
- 2022
-
In: Journal of Physics. - : IOP Publishing. - 0953-8984 .- 1361-648X. ; 34:32, s. 324003-
-
Journal article (peer-reviewed)abstract
- X-ray absorption and resonant inelastic x-ray scattering spectra of LaPt2Si2 single crystal at the Si 2p and La 4d edges are presented. The data are interpreted in terms of density functional theory, showing that the Si spectra can be described in terms of Si s and d local partial density of states (LPDOS), and the La spectra are due to quasi-atomic local 4f excitations. Calculations show that Pt d-LPDOS dominates the occupied states, and a sharp localized La f state is found in the unoccupied states, in line with the observations.
|
|
| 8. |
- Lu, Hongduo, et al.
(author)
-
Ionic liquid interface at an electrode: Simulations of electrochemical properties using an asymmetric restricted primitive model
- 2018
-
In: Journal of Physics Condensed Matter. - 0953-8984 .- 1361-648X. ; 30
-
Journal article (peer-reviewed)abstract
- © 2018 IOP Publishing Ltd. We use Monte Carlo simulations of a coarse-grained model to investigate structure and electrochemical behaviours at an electrode immersed in room temperature ionic liquids (RTILs). The simple RTIL model, which we denote the asymmetric restricted primitive model (ARPM), is composed of monovalent hard-sphere ions, all of the same size, in which the charge is asymmetrically placed. Not only the hard-sphere size (d), but also the charge displacement (b), is identical for all species, i.e. the monovalent RTIL ions are fully described by only two parameters (d, b). In earlier work, it was demonstrated that the ARPM can capture typical static RTIL properties in bulk solutions with remarkable accuracy. Here, we investigate its behaviour at an electrode surface. The electrode is assumed to be a perfect conductor and image charge methods are utilized to handle polarization effects. We find that the ARPM of the ionic liquid reproduces typical (static) electrochemical properties of RTILs. Our model predicts a declining differential capacitance with increasing temperature, which is expected from simple physical arguments. We also compare our ARPM, with the corresponding RPM description, at an elevated temperature (1000 K). We conclude that, even though ion pairing occurs in the ARPM system, reducing the concentration of 'free' ions, it is still better able to screen charge than a corresponding RPM melt. Finally, we evaluate the option to coarse-grain the model even further, by treating the fraction of the ions that form ion pairs implicitly, only through the contribution to the dielectric constant of the corresponding dipolar (ion pair) fluid. We conclude that this primitive representation of ion pairing is not able to reproduce the structures and differential capacitances of the system with explicit ion pairs. The main problem seems to be due to a limited dielectric screening in a layer near the electrode surface, resulting from a combination of orientational restrictions and a depleted dipole density.
|
|
| 9. |
- Midtvedt, Daniel, 1988, et al.
(author)
-
Multi-scale approach for strain-engineering of phosphorene
- 2017
-
In: Journal of Physics Condensed Matter. - 0953-8984 .- 1361-648X. ; 29:18, s. Article nr 185702 -
-
Journal article (peer-reviewed)abstract
- A multi-scale approach for the theoretical description of deformed phosphorene is presented. This approach combines a valence-force model to relate macroscopic strain to microscopic displacements of atoms and a tight-binding model with distance-dependent hopping parameters to obtain electronic properties. The resulting self-consistent electromechanical model is suitable for large-scale modeling of phosphorene devices. We demonstrate this for the case of inhomogeneously deformed phosphorene drum, which may be used as an exciton funnel.
|
|
| 10. |
- Roosen-Runge, Felix, et al.
(author)
-
Self-diffusion of nonspherical particles fundamentally conflicts with effective sphere models
- 2021
-
In: Journal of Physics. - : Institute of Physics Publishing (IOPP). - 0953-8984 .- 1361-648X. ; 33:15
-
Journal article (peer-reviewed)abstract
- Modeling diffusion of nonspherical particles presents an unsolved and considerable challenge, despite its importance for the understanding of crowding effects in biology, food technology and formulation science. A common approach in experiment and simulation is to map nonspherical objects on effective spheres to subsequently use the established predictions for spheres to approximate phenomena for nonspherical particles. Using numerical evaluation of the hydrodynamic mobility tensor, we show that this so-called effective sphere model fundamentally fails to represent the self-diffusion in solutions of ellipsoids as well as rod-like assemblies of spherical beads. The effective sphere model drastically overestimates the slowing down of self-diffusion down to volume fractions below 0.01. Furthermore, even the linear term relevant at lower volume fraction is inaccurate, linked to a fundamental misconception of effective sphere models. To overcome the severe problems related with the use of effective sphere models, we suggest a protocol to predict the short-time self-diffusion of rod-like systems, based on simulations with hydrodynamic interactions that become feasible even for more complex molecules as the essential observable shows a negligible system-size effect.
|
|
