1. |
- Gagliardo, Raffaele, et al.
(author)
-
Seismic analysis of failure mechanisms in adjacent interacting stone masonry buildings via rigid block modeling
- 2023
-
In: Bulletin of Earthquake Engineering. - : Springer Nature. - 1570-761X .- 1573-1456.
-
Journal article (peer-reviewed)abstract
- Groups of contiguous unreinforced stone masonry buildings are a common type of housing seen in old European downtowns. However, assessing their response to earthquakes poses several challenges to the analysts, especially when the housing units are laid out in compact configurations. In fact, in those circumstances a modeling technique that allows for the dynamic interaction of the units is required. The numerical study carried out in this paper makes use of a rigid block modeling approach implemented into in-house software tools to simulate the static behavior and dynamic response of an aggregate stone masonry building. Said approach is used to reproduce the results of bi-axial shake-table tests that were performed on a building prototype as part of the activities organized within the Adjacent Interacting Masonry Structures project, sponsored by the Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe. The experimental mock-up consisted of two adjacent interacting units with matching layout but different height. Two rigid block models are used to investigate the seismic response of the mock-up: a 3D model allowing for the limit analysis of the building on one hand, and a 2D model allowing for the non-linear static pushover and time-history analysis on the other. The 3D model was built for the blind prediction of the test results, as part of a competition organized to test different modeling approaches that are nowadays available to the analysts. The 2D model was implemented once the experimental data were made available, to deepen the investigation by non-linear static pushover and time-history analysis. In both models, the stonework is idealized into an assemblage of rigid blocks interacting via no-tension frictional interfaces, and mathematical programming is utilized to solve the optimization problems associated to the different types of analysis. Differences between numerical and experimental failure mechanisms, base shears, peak ground accelerations, and displacement histories are discussed. Potentialities and limitations of the adopted rigid block models for limit, pushover and time-history analyses are pointed out on the basis of their comparisons with the experimental results.
|
|
2. |
- Tomić, I., et al.
(author)
-
Shake-table testing of a stone masonry building aggregate : overview of blind prediction study
- 2023
-
In: Bulletin of Earthquake Engineering. - : Springer Science and Business Media LLC. - 1570-761X .- 1573-1456.
-
Journal article (peer-reviewed)abstract
- City centres of Europe are often composed of unreinforced masonry structural aggregates, whose seismic response is challenging to predict. To advance the state of the art on the seismic response of these aggregates, the Adjacent Interacting Masonry Structures (AIMS) subproject from Horizon 2020 project Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe (SERA) provides shake-table test data of a two-unit, double-leaf stone masonry aggregate subjected to two horizontal components of dynamic excitation. A blind prediction was organized with participants from academia and industry to test modelling approaches and assumptions and to learn about the extent of uncertainty in modelling for such masonry aggregates. The participants were provided with the full set of material and geometrical data, construction details and original seismic input and asked to predict prior to the test the expected seismic response in terms of damage mechanisms, base-shear forces, and roof displacements. The modelling approaches used differ significantly in the level of detail and the modelling assumptions. This paper provides an overview of the adopted modelling approaches and their subsequent predictions. It further discusses the range of assumptions made when modelling masonry walls, floors and connections, and aims at discovering how the common solutions regarding modelling masonry in general, and masonry aggregates in particular, affect the results. The results are evaluated both in terms of damage mechanisms, base shear forces, displacements and interface openings in both directions, and then compared with the experimental results. The modelling approaches featuring Discrete Element Method (DEM) led to the best predictions in terms of displacements, while a submission using rigid block limit analysis led to the best prediction in terms of damage mechanisms. Large coefficients of variation of predicted displacements and general underestimation of displacements in comparison with experimental results, except for DEM models, highlight the need for further consensus building on suitable modelling assumptions for such masonry aggregates.
|
|