| 1. |
|
|
| 2. |
- Ajalloueian, Fatemeh, et al.
(author)
-
Constructs of electrospun PLGA, compressed collagen and minced urothelium for minimally manipulated autologous bladder tissue expansion
- 2014
-
In: Biomaterials. - : Elsevier BV. - 0142-9612 .- 1878-5905. ; 35:22, s. 5741-5748
-
Journal article (peer-reviewed)abstract
- Bladder regeneration based on minced bladder mucosa in vivo expansion is an alternative to in vitro culturing of urothelial cells. Here, we present the design of a hybrid, electrospun poly(lactic-co-glycolide) (PLGA) - plastically compressed (PC) collagen scaffold that could allow in vivo bladder mucosa expansion. Optimisation of electrospinning was performed in order to obtain increased pore sizes and porosity to consolidate the construct and to support neovascularisation and tissue ingrowth. Tensile tests showed an increase in average tensile strength from 0.6 MPa for PC collagen to 3.57 MPa for the hybrid construct. The optimised PLGA support scaffold was placed between two collagen gels, and the minced tissue was distributed either on top or both on top and inside the construct prior to PC; this was then cultured for up to four weeks. Morphology, histology and SEM demonstrated that the construct maintained its integrity throughout cell culture. Cells from minced tissue migrated, expanded and re-organised to a confluent cell layer on the top of the construct after two weeks and formed a multilayered urothelium after four weeks. Cell morphology and phenotype was typical for urothelial mucosa during tissue culture. (C) 2014 Elsevier Ltd. All rights reserved.
|
|
| 3. |
|
|
| 4. |
- Alarcon, Emilio I, et al.
(author)
-
The biocompatibility and antibacterial properties of collagen-stabilized, photochemically prepared silver nanoparticles
- 2012
-
In: Biomaterials. - : Elsevier. - 0142-9612 .- 1878-5905. ; 33:19, s. 4947-4956
-
Journal article (peer-reviewed)abstract
- Spherical 3.5 nm diameter silver nanoparticles (AgNP) stabilized in type I collagen (AgNP@collagen) were prepared in minutes (5-15 min) at room temperature by a photochemical method initiated by UVA irradiation of a water-soluble non-toxic benzoin. This biocomposite was examined to evaluate its biocompatibility and its anti-bacterial properties and showed remarkable properties. Thus, while keratinocytes and fibroblasts were not affected by AgNP@collagen, it was bactericidal against Bacillus megaterium and E. coli but only bacteriostatic against S. epidermidis. In particular, the bactericidal properties displayed by AgNP@collagen were proven to be due to AgNP in AgNP@collagen, rather than to released silver ions, since equimolar concentrations of Ag are about four times less active than AgNP@collagen based on total Ag content. This new biocomposite was stable over a remarkable range of NaCl, phosphate, and 2-(N-morpholino)ethanesulfonic acid concentrations and for over one month at 4 degrees C. Circular dichroism studies show that the conformation of collagen in AgNP@collagen remains intact. Finally, we have compared the properties of AgNP@collagen with a similar biocomposite prepared using alpha-poly-L-Lysine and also with citrate stabilized AgNP; neither of these materials showed comparable biocompatibility, stability, or anti-bacterial activity.
|
|
| 5. |
- Almlöf, Martin, et al.
(author)
-
Molecular dynamics study of heparin based coatings
- 2008
-
In: Biomaterials. - : Elsevier BV. - 0142-9612 .- 1878-5905. ; 29:33, s. 4463-4469
-
Journal article (peer-reviewed)abstract
- Heparin based surface coatings can be used to improve the biocompatibility of metallic surfaces such as vascular stents. Here, we report molecular dynamics simulations of a macromolecular conjugate of heparin used to prepare such surfaces. The structural properties of the heparin conjugate are investigated for different degrees of hydration, to allow comparison with spectroscopic results. The simulations show that the polymer becomes more compact with an increasing degree of inter-chain interactions as the hydration increases. This is also accompanied by changes in the interaction patterns among the heparin chains, where counter ions become looser associated with the disaccharide units and their strong interactions can be partly replaced by water molecules and heparin hydroxyl groups. The structural information that can be obtained from computer simulations of this type of coatings can be very valuable for understanding and further development of functional interfaces, since very little is known experimentally regarding their detailed structural properties. (C) 2008 Elsevier Ltd. All rights reserved.
|
|
| 6. |
|
|
| 7. |
- Apelgren, Peter, et al.
(author)
-
Vascularization of tissue engineered cartilage-Sequential in vivo MRI display functional blood circulation
- 2021
-
In: Biomaterials. - : Elsevier BV. - 0142-9612 .- 1878-5905. ; 276
-
Journal article (peer-reviewed)abstract
- Establishing functional circulation in bioengineered tissue after implantation is vital for the delivery of oxygen and nutrients to the cells. Native cartilage is avascular and thrives on diffusion, which in turn depends on proximity to circulation. Here, we investigate whether a gridded three-dimensional (3D) bioprinted construct would allow ingrowth of blood vessels and thus prove a functional concept for vascularization of bioengineered tissue. Twenty 10 x 10 x 3-mm 3Dbioprinted nanocellulose constructs containing human nasal chondrocytes or cell-free controls were subcutaneously implanted in 20 nude mice. Over the next 3 months, the mice were sequentially imaged with a 7 T small-animal MRI system, and the diffusion and perfusion parameters were analyzed. The chondrocytes survived and proliferated, and the shape of the constructs was well preserved. The diffusion coefficient was high and well preserved over time. The perfusion and diffusion patterns shown by MRI suggested that blood vessels develop over time in the 3D bioprinted constructs; the vessels were confirmed by histology and immunohistochemistry. We conclude that 3D bioprinted tissue with a gridded structure allows ingrowth of blood vessels and has the potential to be vascularized from the host. This is an essential step to take bioengineered tissue from the bench to clinical practice.
|
|
| 8. |
- Arvidsson, Sara, 1977-, et al.
(author)
-
Blood plasma contact activation on silicon, titanium and aluminium.
- 2007
-
In: Biomaterials. - : Elsevier BV. - 0142-9612 .- 1878-5905. ; 28:7, s. 1346-54
-
Journal article (peer-reviewed)abstract
- In the present work, blood plasma protein deposition to spontaneously air oxidized silicon, titanium and aluminium was re-investigated in vitro. Immunological- and null ellipsometry methods were used to detect and quantitate adsorbed proteins, RIA methods to study the retention of preadsorbed 125I-HSA upon exposure to buffer or blood plasma, and kallikrein-specific colorimetric substrate S-2302 to follow the surface generation of kallikrein. The results show that the contact activation of coagulation and complement systems are connected on Si and Ti, but not on Al, via coagulation factor XII. Preadsorbed 125I-HSA was most readily displaced on silicon, followed by titanium and aluminium. The surfaces displayed different antibody binding patterns after short and long-time exposures to plasma. Titanium and silicon bound anti-HMWK after 1 min in plasma, but aluminium did not. When the plasma incubation time was prolonged up to 2h the anti-HMWK binding disappeared totally on titanium and decreased on silicon. During the same time period, anti-C3c binding increased to the three types of surfaces. Also, the anti-C3c binding onto Si and Ti, but not Al, disappeared after incubation in Factor XII deficient plasma or when a specific coagulation factor XII (Factor XII) inhibitor, corn trypsin inhibitor (CTI) was added to normal plasma. The surface contacted plasmas cleaved the kallikrein-specific reagent S-2302 both after single surface contact, and after reincubation of surfaces in fresh plasma. The results show that C3b and Factor XIIa and their degradation products were retained at the surfaces.
|
|
| 9. |
|
|
| 10. |
|
|
