| 1. |
- Ahlqvist, Jan, Birger, 1952-, et al.
(author)
-
Osseointegrated implants in edentulous jaws: a 2-year longitudinal study.
- 1990
-
In: International Journal of Oral & Maxillofacial Implants. - 0882-2786 .- 1942-4434. ; 5:2, s. 155-163
-
Journal article (peer-reviewed)abstract
- Osseointegrated implants in 50 edentulous jaws were studied during a 2-year observation period. The implant survival rate was 89% in the maxillae and 97% in the mandibles. The marginal bone loss averaged 1.7 mm in the maxillae and 1.1 mm in the mandibles. Most of this bone loss occurred during the first year. The bone loss was greater in jaws with a preoperatively minor resorption of the alveolar ridge than in those with moderate or advanced resorption. The bone loss was also greater at the medially positioned implants than at those more posterior.
|
|
| 2. |
- Akimoto, K, et al.
(author)
-
Evaluation of titanium implants placed into simulated extraction sockets : a study in dogs
- 1999
-
In: International Journal of Oral & Maxillofacial Implants. - 0882-2786 .- 1942-4434. ; 14:3, s. 351-360
-
Journal article (peer-reviewed)abstract
- The purpose of this study was to evaluate the effect of gap width on bone healing around implants placed into simulated extraction socket defects of varying widths in 10 mongrel dogs. All premolars were removed and the alveolar ridges were reduced to a width of 7 mm. Nine weeks later, a total of 80 implants, 10 mm long by 3.3 mm wide, were placed into osteotomy sites prepared to 3 different diameters in the coronal half, simulating extraction sockets. Three experimental sites, with gap sizes of 0.5 mm, 1.0 mm, and 1.4 mm, were created; the control sites had no gap. The depth of each defect was measured at the time of implant placement. All implants were stable at the time of placement. The dogs were euthanized 12 weeks after implant placement, and blocks containing the implants and adjacent bone were submitted for histologic evaluation. Clinically, all control and test sites healed, with complete bone fill in the defect. Percentages of bone-to-implant contact were measured histologically. As the gap widened, the amount of bone-to-implant contact decreased, and the point of the highest bone-to-implant contact shifted apically. These changes were statistically significant (P < .001). No statistically significant differences in bone-to-implant contact were found between the sites when the apical 4 mm of implants were compared. Within the limits of this study, the simulated extraction socket defects healed clinically, with complete bone fill, regardless of the initial gap size. However, the width of the gap at the time of implant placement had a significant impact on the histologic percentage and the height of bone-to-implant contact.
|
|
| 3. |
- Albrektsson, Tomas, 1945, et al.
(author)
-
An Imbalance of the Immune System Instead of a Disease Behind Marginal Bone Loss Around Oral Implants: Position Paper
- 2020
-
In: The International journal of oral & maxillofacial implants. - : Quintessence Publishing. - 1942-4434 .- 0882-2786. ; 35:3, s. 495-502
-
Journal article (peer-reviewed)abstract
- PURPOSE: The purpose of this paper is to present evidence that supports the notion that the primary reason behind marginal bone loss and implant failure is immune-based and that bacterial actions in the great majority of problematic cases are of a secondary nature. MATERIALS AND METHODS: The paper is written as a narrative review. RESULTS: Evidence is presented that commercially pure titanium is not biologically inert, but instead activates the innate immune system of the body. For its function, the clinical implant is dependent on an immune/inflammatory defense against bacteria. Biologic models such as ligature studies have incorrectly assumed that the primary response causing marginal bone loss is due to bacterial action. In reality, bacterial actions are secondary to an imbalance of the innate immune system caused by the combination of titanium implants and ligatures, ie, nonself. This immunologic imbalance may lead to marginal bone resorption even in the absence of bacteria. CONCLUSION: Marginal bone loss and imminent oral implant failure cannot be properly analyzed without a clear understanding of immunologically caused tissue responses.
|
|
| 4. |
- Albrektsson, Tomas, 1945, et al.
(author)
-
On crestal/marginal bone loss around dental implants.
- 2012
-
In: The International journal of prosthodontics. - : Quintessence Publishing co inc. - 0893-2174 .- 1139-9791. ; 27:4, s. 736-738
-
Journal article (other academic/artistic)
|
|
| 5. |
- Alenezi, Ali, et al.
(author)
-
Effects of Local Drug and Chemical Compound Delivery on Bone Regeneration Around Dental Implants in Animal Models : A Systematic Review and Meta-Analysis
- 2018
-
In: International Journal of Oral & Maxillofacial Implants. - : Quintessence. - 0882-2786 .- 1942-4434. ; 33:1, s. e1-e18
-
Research review (peer-reviewed)abstract
- Purpose: One of the suggested methods for enhancing osseointegration is the local application of drug agents around implant surfaces. The aim of this review was to evaluate the methods most commonly used for local drug and chemical compound delivery to implant sites and assess their influence on osseointegration. Materials and Methods: An electronic search was undertaken in three databases (PubMed, Scopus, Embase). The search was limited to animal experiments using endosseous implants combined with local drug delivery systems. Meta-analyses were performed for the outcome bone-to-implant contact (BIC). Results: Sixty-one studies met the inclusion criteria. Calcium phosphate (CaP), bisphosphonates (BPs), and bone morphogenetic proteins (BMPs) were the most commonly used chemical compounds. There were two main methods for local drug delivery at the bone-implant interface: (1) directly from an implant surface by coating or immobilizing techniques, and (2) the local application of drugs to the implant site, using carriers. There was a statistically significant increase in BIC for both local drug delivery methods (P = .02 and P < .0001, respectively) compared with the control methods. There was a statistically significant increase in BIC when CaP (P = .0001) and BMPs (P = .02) were either coating implants or were delivered to the implant site, in comparison to when drugs were not used. The difference was not significant for the use of BPs (P = .15). Conclusion: It is suggested that the use of local chemical compound delivery systems around implants could significantly improve implant osseointegration in animal models. It is a matter of debate whether these in vivo results might have some significant effect in the human clinical setting in the long term.
|
|
| 6. |
- Antonoglou, Georgios N., et al.
(author)
-
Clinical Performance of Dental Implants Following Sinus Floor Augmentation : A Systematic Review and Meta-Analysis of Clinical Trials with at Least 3 Years of Follow-up
- 2018
-
In: International Journal of Oral & Maxillofacial Implants. - : Quintessence. - 0882-2786 .- 1942-4434. ; 33:3, s. E45-E65
-
Research review (peer-reviewed)abstract
- Purpose: The purpose of this systematic review was to assess the survival of implants placed in augmented sinuses on a medium-to long-term basis, and identify factors affecting implant survival such as surgical technique, bone grafts, and timing of implant placement. Materials and Methods: A literature search up to July 2016 was performed to identify prospective clinical studies on sinus floor augmentation in conjunction with implant placement with a minimum follow-up of 3 years. Meta-analytic methods were implemented to calculate implant survival rates and relative risks (RR) for failure and the effect of surgical technique, use of bone graft, graft type, use of membrane, mean residual bone height, and timing of implant insertion. Results: A total of 17 clinical trials (1 randomized and 16 prospective nonrandomized) were included, which pertained to 637 patients (at least 48% male) and 1,610 implants placed after sinus floor augmentation with the osteotome (transalveolar) or lateral window approach. The pooled implant survival rate at 3 to 6 years of follow-up was 97.7% (17 studies; 95% CI = 94.4% to 99.7%) with high heterogeneity. Smoking was associated with significantly worse implant survival (2 studies; RR = 4.8; 95% CI = 1.2 to 19.4; P < .05). However, evidence of influencing factors varied from very low to moderate after adopting the GRADE approach, due to risk of bias, imprecision, inconsistency, and small-study effects. Conclusion: Current evidence suggests that implants in augmented sinuses have high survival rates, with smoking playing a potentially important negative role in their prognosis. Both indirect and direct maxillary sinus floor augmentation seem to have a low frequency of manageable complications.
|
|
| 7. |
- Aparicio, C., et al.
(author)
-
ORIS Criteria of Success for the Zygoma-Related Rehabilitation: The (Revisited) Zygoma Success Code
- 2020
-
In: International Journal of Oral & Maxillofacial Implants. - : Quintessence Publishing. - 0882-2786 .- 1942-4434. ; 35:2, s. 366-378
-
Journal article (peer-reviewed)abstract
- Zygomatic-related implant rehabilitation differs from traditional implant treatment in biomechanics, clinical procedures, outcomes, and eventual complications such as soft tissue incompetence or recession that may lead to recurrent sinus/soft tissue complications. The extreme maxillary atrophy that indicates the use of zygomatic implants prevents use of conventional criteria to describe implant success/failure. Currently, results and complications of zygomatic implants reported in the literature are inconsistent and lack a standardized systematic review. Moreover, protocols for the rehabilitation of the atrophic maxilla using zygomatic implants have been in continuous evolution. The current zygomatic approach is relatively new, especially if the head of the zygomatic implant is located in an extramaxillary area with interrupted alveolar bone around its perimeter. Specific criteria to describe success/survival of zygomatic implants are necessary, both to write and to read scientific literature related to zygomatic implant-based oral rehabilitations. The aim of this article was to review the criteria of success used for traditional and zygomatic implants and to propose a revisited Zygomatic Success Code describing specific criteria to score the outcome of a rehabilitation anchored on zygomatic implants. The ORIS acronym is used to name four specific criteria to systematically describe the outcome of zygomatic implant rehabilitation: offset measurement as evaluation of prosthetic positioning; rhino-sinus status report based on a comparison of presurgical and postsurgical cone beam computed tomography in addition to a clinical questionnaire; infection permanence as evaluation of soft tissue status; and stability report, accepting as success some mobility until dis-osseointegration signs appear. Based on these criteria, the assessment of five possible conditions when evaluating zygomatic implants is possible.
|
|
| 8. |
- Bergendal, Birgitta, 1947-, et al.
(author)
-
Implant failure in young children with ectodermal dysplasia : a retrospective evaluation of use and outcome of dental implant treatment in children in Sweden
- 2008
-
In: International Journal of Oral & Maxillofacial Implants. - Lombard, Illinois, USA : Quintessence Publishing Co, Inc. - 0882-2786 .- 1942-4434. ; 23:3, s. 520-524
-
Journal article (peer-reviewed)abstract
- Purpose: This study surveyed dental implant treatment in children up to age 16 years in Sweden between 1985 and 2005, with special reference to young children with ectodermal dysplasia (ED) and anodontia in the lower jaw. Materials and Methods: A questionnaire was sent to Swedish specialist clinics in oral and maxillofacial surgery and prosthetic dentistry. Also, the teams who had treated children with ED were asked to submit their records for these children for a discussion on reasons for implant failure. Results: Six out of 30 specialist centers (20%) in Sweden had treated 26 children with dental implants between 1985 and 2005. Twenty-one patients had received 33 implants to replace teeth missing from nonsyndromic agenesis or trauma at ages 14 or 15 years; 2 (6.1%) of these implants were lost. Five children with ED received 14 implants at 5 to 12 years of age; 9 (64.3%) of these implants were lost before loading. Conclusions: Dental implant placement has been a rarely used treatment modality in Swedish children less than 16 years old in the last 20 years. The failure rate in children treated because of tooth agenesis was only slightly higher than that reported for adult individuals, whereas in young children with ED and anodontia in the mandible, implants seemed to present special challenges, and the failure rate was very high. The small jaw size and peroperative conditions, rather than ED per se, were thought to be the main risk factors. Centralizing implant operations in young children with ED and monitoring outcomes in implant registers are strongly advocated. Int J Oral Maxillofacial Implants 2008;23:520–524
|
|
| 9. |
- Bergkvist, Göran, et al.
(author)
-
Immediately loaded implants supporting fixed prostheses in the edentulous maxilla : A preliminary clinical and radiologic report
- 2005
-
In: International Journal of Oral & Maxillofacial Implants. - 0882-2786 .- 1942-4434. ; 20:3, s. 399-405
-
Journal article (peer-reviewed)abstract
- Purpose: To evaluate the survival rate of immediately loaded ITI sand-blasted, large-grit, acid-etched (SLA) solid-screw dental implants in the edentulous maxilla after 8 months of loading. Materials and Methods: Twenty-eight patients (mean age 63 years) with edentulous maxillae each received 6 implants and 1 implant-supported fixed provisional prosthesis within 24 hours after surgery. After a mean healing time of 15 weeks, the patient received a definitive, screw-retained, implant-supported fixed prosthesis. A total of 168 implants were placed. Clinical parameters were registered after 1 month of loading with the implant-supported fixed prostheses as well as 8 months after implant place ment. Radiologic examinations and assessments were made at implant placement and after 8 months. Results: The mean marginal bone level at implant placement was 1.6 mm (range 0 to 5.1, SD 1.1) apical of the reference point (the implant shoulder). The mean marginal bone level at the 8-month follow-up was 3.2 mm (range 0.4 to 5.9, SD 1.1) apical of the reference point. Three implants failed during the healing period. Discussion: The improved results in the present study might be a result of the positive effect of splinting the implants immediately after placement Conclusion: ITI SLA solid-screw implants immediately loaded (ie, loaded within 24 hours of placement) and supporting fixed prostheses had successful survival rates after 8 months. The present results constitute a solid base line for future follow-up studies.
|
|
| 10. |
- Bonfante, Estevam Augusto, et al.
(author)
-
Biomechanical testing of microblasted, acid-etched/microblasted, anodized, and discrete crystalline deposition surfaces : an experimental study in beagle dogs
- 2013
-
In: International Journal of Oral & Maxillofacial Implants. - : Quintessence. - 0882-2786 .- 1942-4434. ; 28:1, s. 136-142
-
Journal article (peer-reviewed)abstract
- PURPOSE: Modifications in implant surface topography and chemistry may alter the early bone response at different levels. This study characterized four implant surfaces and evaluated the biomechanical fixation and histologic response at early implantation times in a canine radius model. MATERIALS AND METHODS: External-hexagon Branemark-type implants were used with four experimental surfaces: microblasted (MI), acid-etched and microblasted (AAM), anodized (A), and discrete crystalline deposition (DCD). Surface topography was assessed by scanning electron microscopy, interferometry, and x-ray photoelectron spectroscopy. The implants were placed in the central region of the radii of eight beagle dogs and remained in vivo for 10 or 30 days. The implants were torqued to interface failure, and a general linear statistical model with torque as the dependent variable and implant surface and time in vivo as independent variables was used. RESULTS: All surfaces presented were textured, and different surface chemistries were observed. No significant differences between implant surfaces were observed for torque at 10 days. However, at 30 days, the AAM surface presented significantly higher torque values compared to the DCD and A surfaces. Significantly higher torque values were observed at 30 days compared to 10 days (P < .001). CONCLUSIONS: Significantly different biomechanical fixation dependent on surface preparation was observed after 30 days, and all surfaces were biocompatible and osteoconductive.
|
|
