1. |
- Akbar, Kamran, et al.
(author)
-
Carbon Dots for Photocatalytic Degradation of Aqueous Pollutants : Recent Advancements
- 2021
-
In: Advanced Optical Materials. - : John Wiley & Sons. - 2162-7568 .- 2195-1071. ; 9:17
-
Research review (peer-reviewed)abstract
- The immense progress of humanity on the technological, domestic, and industrial fronts comes at the cost of polluting the planet. Aquatic pollution is particularly dangerous since all life forms are directly linked to it. Each year tons of industrial and domestic pollutants make their way into aqueous systems. Efficient removal/degradation of these pollutants is of prime importance for the sustainable future. Among many technologies, photodegradation is an emerging and promising method for the successful removal of aqueous pollutants since it is powered by abundant solar light. The last decade had shown that carbon dots are among the most promising materials that can be utilized as an efficient tool to derive various solar-driven chemical reactions. Carbon dots possess unique photophysical and chemical properties such as light-harvesting over a broad-spectrum region, upconversion photoluminescence, photosensitizers, chemical inertness, and bivalent redox character, etc. The ease of synthesis of carbon dots at low cost also contributes hugely to their utilizations as an efficient photocatalyst for the degradation of aqueous pollutants. This review summarizes the recent progress made in the field of photodegradation of aqueous pollutants with the aid of carbon dots and their hybrids, highlighting the critical role carbon dots can play in the field.
|
|
2. |
- Blake, Jolie, 1986, et al.
(author)
-
Scalable Reflective Plasmonic Structural Colors from Nanoparticles and Cavity Resonances – the Cyan-Magenta-Yellow Approach
- 2022
-
In: Advanced Optical Materials. - : Wiley. - 2195-1071 .- 2162-7568. ; 10:13
-
Journal article (peer-reviewed)abstract
- Plasmonic metasurfaces for color generation are emerging as important components for next generation display devices. Fabricating bright plasmonic colors economically and via easily scalable methods, however, remains difficult. Here, the authors demonstrate an efficient and scalable strategy based on colloidal lithography to fabricate silver-based reflective metal–insulator–nanodisk plasmonic cavities that provide a cyan-magenta-yellow (CMY) color palette with high relative luminance. With the same basic structure, they exploit different mechanisms to efficiently produce a complete subtractive color palette. Finite-difference time-domain simulations reveal that these mechanisms include gap surface plasmon modes for thin insulators and hybridized modes between disk plasmons and Fabry–Pérot modes for thicker systems. To produce yellow hues, they take advantage of higher-energy gap surface plasmon modes to allow resonance dips in the blue spectral region for comparably large nanodisks, thereby circumventing difficult fabrication of nanodisks less than 80 nm. It is anticipated that incorporation of these strategies can reduce fabrication constraints, produce bright saturated colors, and expedite large-scale production.
|
|
3. |
- Cai, Weidong, 1991-, et al.
(author)
-
Chirality Induced Crystal Structural Difference in Metal Halide Composites
- 2022
-
In: Advanced Optical Materials. - : Wiley-V C H Verlag GMBH. - 2162-7568 .- 2195-1071. ; 10:16
-
Journal article (peer-reviewed)abstract
- Incorporating chiral organic compounds into metal halide frames is a common and useful method to introduce chirality in metal halide composites. The structures of resulting racemic and chiral composites are usually considered to be nearly identical owing to similar chemical bonding. In this work, by incorporating chiral MBABr (bromide methylbenzylamine) into an inorganic frame, a significant crystallization difference between the resulting racemic and chiral metal halide composites is observed, as confirmed by both structural and spectroscopic measurements. In addition, the structural transformation in the chiral composites can also be induced by moisture, ascribed to the asymmetric hydrogen bonding in chiral materials. These results provide new insights for the future synthesis of chiral materials and open up new possibilities to advance the materials functionalities.
|
|
4. |
- Carrara, Angelica, et al.
(author)
-
Plasmon Hybridization in Compressible Metal–Insulator–Metal Nanocavities : An Optical Approach for Sensing Deep Sub‐Wavelength Deformation
- 2020
-
In: Advanced Optical Materials. - : Wiley-VCH Verlagsgesellschaft. - 2162-7568 .- 2195-1071. ; 8:18
-
Journal article (peer-reviewed)abstract
- A pressure-induced deformation-sensitive device (DSD) is presented based on 2D matrices of plasmonic gold nanodisks coupled to a metal thin layer through a compressible dielectric spacer, namely a deformable metal–insulator–metal (MIM) nanocavity, to report deep sub-wavelength size variations (<λ/200). The system is characterized by two hybrid branches, which are resonant in the visible/near infrared spectral region. The fundamental mode, owing to the near-field interaction between the plasmonic nanostructures and the metal film, exhibits a remarkable sensitivity to the gap size, exceeding that of a planar “macroscopic” optical cavity and extending its operational domain to the sub-wavelength range, where excellent opportunities toward truly multiscale MIMs-based pressure sensors can be envisioned. Concurrently, its intrinsic plasmonic nature synergistically combines into a single platform multi-purpose functionalities, such as ultrasensitive detection and remote temperature readout, with practical perspectives in ultra-compact inspection tools for structural and functional information at the nanoscale.
|
|
5. |
- Chen, Hongting, et al.
(author)
-
High-Efficiency Formamidinium Lead Bromide Perovskite Nanocrystal-Based Light-Emitting Diodes Fabricated via a Surface Defect Self-Passivation Strategy
- 2020
-
In: Advanced Optical Materials. - : WILEY-V C H VERLAG GMBH. - 2162-7568 .- 2195-1071. ; 8:6
-
Journal article (peer-reviewed)abstract
- Formamidinium lead bromide (FAPbBr(3)) nanocrystals (NCs) demonstrate great potential in light-emitting diode (LED) applications due to their pure green emission and excellent stability. However, the abundant defects at the surface of the NCs act as charge trapping centers and significantly increase the trap-assisted nonradiative recombination channels, hampering the performance improvement of LEDs based on FAPbBr(3) NCs. Herein, a facile self-passivation strategy of the surface defects is developed by introducing excess formamidinium bromide (FABr) during the colloidal synthesis of NCs, leading to much improved photoluminescence quantum yield (PLQY) of the obtained NCs. In addition, enhanced charge transport property is measured in the assembled films owing to the simultaneously declined insulating ligands at the surface of NCs. The molar ratio of FABr and PbBr2 is rationally optimized during the synthesis of NCs and high-efficient green-emissive LEDs are fabricated with a champion current efficiency of 76.8 cd A(-1), corresponding to an external quantum efficiency of 17.1%, which is among the best-performing green LEDs based on perovskite NCs so far.
|
|
6. |
- Chen, Hui, et al.
(author)
-
Photon Walk in Transparent Wood: Scattering and Absorption in Hierarchically Structured Materials
- 2022
-
In: Advanced Optical Materials. - : Wiley. - 2162-7568 .- 2195-1071.
-
Journal article (peer-reviewed)abstract
- The optical response of hierarchical materials is convoluted, which hinders their direct study and property control. Transparent wood (TW) is an emerging biocomposite in this category, which adds optical function to the structural properties of wood. Nano- and microscale inhomogeneities in composition, structure and at interfaces strongly affect light transmission and haze. While interface manipulation can tailor TW properties, the realization of optically clear wood requires detailed understanding of light-TW interaction mechanisms. Here we show how material scattering and absorption coefficients can be extracted from a combination of experimental spectroscopic measurements and a photon diffusion model. Contributions from different length scales can thus be deciphered and quantified. It is shown that forward scattering dominates haze in TW, primarily caused by refractive index mismatch between the wood substrate and the polymer phase. Rayleigh scattering from the wood cell wall and absorption from residual lignin have minor effects on transmittance, but the former affects haze. Results provide guidance for material design of transparent hierarchical composites towards desired optical functionality; we demonstrate experimentally how transmittance and haze of TW can be controlled over a broad range.
|
|
7. |
- Chen, Zhan, et al.
(author)
-
Photoluminescence Enhancement for Efficient Mixed-Halide Blue Perovskite Light-Emitting Diodes
- 2023
-
In: Advanced Optical Materials. - : WILEY-V C H VERLAG GMBH. - 2162-7568 .- 2195-1071. ; 11:6
-
Journal article (peer-reviewed)abstract
- The development of highly efficient blue perovskite light-emitting diodes (PeLEDs) remains a big challenge, requiring more fundamental investigations. In this work, significant photoluminescence enhancement in mixed halide blue perovskite films is demonstrated by using a molecule, benzylphosphonic acid, which eventually doubles the external quantum efficiency to 6.3% in sky-blue PeLEDs. The photoluminescence enhancement is achieved by forming an oxide-bonded perovskite surface at grain boundaries and suppressing electron-phonon interaction, which enhances the radiative recombination rate and reduces the nonradiative recombination rate, respectively. Moreover, severe thermal quenching is observed in the blue perovskite films, which can be explained by a two-step mechanism involving exciton dissociation and electron-phonon interaction. The results suggest that enhancing the radiative recombination rate and reducing the electron-phonon interaction-induced nonradiative recombination rate are crucial for achieving blue perovskite films with strong emission at or above room temperature.
|
|
8. |
- Cheng, Li-Peng, et al.
(author)
-
Efficient CsPbBr3 Perovskite Light-Emitting Diodes Enabled by Synergetic Morphology Control
- 2019
-
In: Advanced Optical Materials. - : WILEY-V C H VERLAG GMBH. - 2162-7568 .- 2195-1071. ; 7:4
-
Journal article (peer-reviewed)abstract
- The development of solution-processed inorganic metal halide perovskite light-emitting diodes (PeLEDs) is currently hindered by low emission efficiency due to morphological defects and severe non-radiative recombination in all-inorganic perovskite emitters. Herein, bright PeLEDs are demonstrated by synergetic morphology control over cesium lead bromide (CsPbBr3) perovskite films with the combination of two additives. The phenethylammonium bromide additive enables the formation of mixed-dimensional CsPbBr3 perovskites featuring the reduced grain size (amp;lt;15 nm) and efficient energy funneling, while the dielectric polyethyleneglycol additive promotes the formation of highly compact and pinhole-free perovskite films with defect passivation at grain boundaries. Consequently, green PeLEDs achieve a current efficiency of 37.14 cd A(-1) and an external quantum efficiency of 13.14% with the maximum brightness up to 45 990 cd m(-2) and high color purity. Furthermore, this method can be effectively extended to realize flexible PeLEDs on plastic substrates with a high efficiency of 31.0 cd A(-1).
|
|
9. |
- Domina, Kateryna L., et al.
(author)
-
Bonding and Antibonding Modes in Metal–Dielectric–Metal Plasmonic Antennas for Dual‐Band Applications
- 2020
-
In: Advanced Optical Materials. - : Wiley. - 2162-7568 .- 2195-1071. ; 8:5
-
Journal article (peer-reviewed)abstract
- Resonant optical antennas supporting plasmon polaritons (SPPs) – collective excitations of electrons coupled to electromagnetic fields in a medium – are relevant to sensing, photovoltaics and light emitting devices, among others. Due to the SPP dispersion, a conventional antenna of fixed geometry, exhibiting a narrow SPP resonance, cannot simultaneously operate in two different spectral bands. In contrast, this study demonstrates that in metallic disks, separated by a nanometric spacer, the hybridized anti-bonding SPP mode stays in the visible range, while the bonding one can be pushed down to the mid-infrared range. Such an SPP dimer can sense two materials of nanoscale volumes, whose fingerprint central frequencies differ by a factor of 5. Additionally, the mid-infrared SPP resonance can be tuned by employing a phase-change material (VO2) as a spacer. The dielectric constant of the phase-change material is controlled by heating the material at the frequency of the anti-bonding optical mode. Our findings open the door to a new class of optoelectronic devices able to operate in significantly different frequency ranges in the linear regime, and with the same polarization of the illuminating wave.
|
|
10. |
- Dong, J, et al.
(author)
-
Low-Index-Contrast Dielectric Lattices on Metal for Refractometric Sensing
- 2020
-
In: Advanced Optical Materials. - : Wiley-VCH Verlag. - 2162-7568 .- 2195-1071.
-
Journal article (peer-reviewed)abstract
- This article reports refractometric sensing using two optical resonances of different types supported by TiO2 nanopillar arrays on a gold film, which can be exposed to aqueous or organic environments. One lattice resonance, with enhanced electric fields extending into the surrounding environment, can maintain a quality factor Q > 200 when the bulk refractive index of the surrounding environment varies in a large range from 1.33 to 1.58. This lattice resonance exhibits not only sharp transitions of reflected light intensity but also rapid phase changes. The other resonance is of plasmonic nature with electric fields localized on the metal surface. Small changes in the bulk refractive index or the adsorbate layer (thickness and index) can be detected, with sensitivity comparable to that of plasmonic counterparts. The present hybrid metal–dielectric platform is promising for applications requiring dielectric instead of metallic sensing surfaces.
|
|