1. |
- Chen, Qiaonan, 1992, et al.
(författare)
-
Effects of Flexible Conjugation-Break Spacers of Non-Conjugated Polymer Acceptors on Photovoltaic and Mechanical Properties of All-Polymer Solar Cells
- 2022
-
Ingår i: Nano-Micro Letters. - : Springer Science and Business Media LLC. - 2311-6706 .- 2150-5551. ; 14:1
-
Tidskriftsartikel (refereegranskat)abstract
- Highlights: A series of non-conjugated acceptor polymers with flexible conjugation-break spacers (FCBSs) of different lengths were synthesized.The effect of FCBSs length on solubility of the acceptor polymers, and their photovoltaic and mechanical properties in all-polymer solar cells were explored.This work provides useful guidelines for the design of semiconducting polymers by introducing FCBS with proper length, which can giantly improved properties that are not possible to be achieved by the state-of-the-art fully conjugated polymers. Abstract: All-polymer solar cells (all-PSCs) possess attractive merits including superior thermal stability and mechanical flexibility for large-area roll-to-roll processing. Introducing flexible conjugation-break spacers (FCBSs) into backbones of polymer donor (PD) or polymer acceptor (PA) has been demonstrated as an efficient approach to enhance both the photovoltaic (PV) and mechanical properties of the all-PSCs. However, length dependency of FCBS on certain all-PSC related properties has not been systematically explored. In this regard, we report a series of new non-conjugated PAs by incorporating FCBS with various lengths (2, 4, and 8 carbon atoms in thioalkyl segments). Unlike common studies on so-called side-chain engineering, where longer side chains would lead to better solubility of those resulting polymers, in this work, we observe that the solubilities and the resulting photovoltaic/mechanical properties are optimized by a proper FCBS length (i.e., C2) in PA named PYTS-C2. Its all-PSC achieves a high efficiency of 11.37%, and excellent mechanical robustness with a crack onset strain of 12.39%, significantly superior to those of the other PAs. These results firstly demonstrate the effects of FCBS lengths on the PV performance and mechanical properties of the all-PSCs, providing an effective strategy to fine-tune the structures of PAs for highly efficient and mechanically robust PSCs.[Figure not available: see fulltext.]
|
|
2. |
- Delekta, Szymon Sollami, et al.
(författare)
-
Drying-Mediated Self-Assembly of Graphene for Inkjet Printing of High-Rate Micro-supercapacitors
- 2020
-
Ingår i: Nano-Micro Letters. - : Springer. - 2311-6706 .- 2150-5551. ; 12:1
-
Tidskriftsartikel (refereegranskat)abstract
- Scalable fabrication of high-rate micro-supercapacitors (MSCs) is highly desired for on-chip integration of energy storage components. By virtue of the special self-assembly behavior of 2D materials during drying thin films of their liquid dispersion, a new inkjet printing technique of passivated graphene micro-flakes is developed to directly print MSCs with 3D networked porous microstructure. The presence of macroscale through-thickness pores provides fast ion transport pathways and improves the rate capability of the devices even with solid-state electrolytes. During multiple-pass printing, the porous microstructure effectively absorbs the successively printed inks, allowing full printing of 3D structured MSCs comprising multiple vertically stacked cycles of current collectors, electrodes, and sold-state electrolytes. The all-solid-state heterogeneous 3D MSCs exhibit excellent vertical scalability and high areal energy density and power density, evidently outperforming the MSCs fabricated through general printing techniques.[Figure not available: see fulltext.].
|
|
3. |
- Jiang, Yuting, et al.
(författare)
-
Laser-Etched Stretchable Graphene–Polymer Composite Array for Sensitive Strain and Viscosity Sensors
- 2019
-
Ingår i: Nano-Micro Letters. - : Springer Science and Business Media LLC. - 2150-5551 .- 2311-6706. ; 11:1
-
Tidskriftsartikel (refereegranskat)abstract
- The ability to control surface wettability and liquid spreading on textured surfaces is of interest for extensive applications. Soft materials have prominent advantages for producing the smart coatings with multiple functions for strain sensing. Here, we report a simple method to prepare flexible hydrophobic smart coatings using graphene–polymer films. Arrays of individual patterns in the films were created by laser engraving and controlled the contact angle of small drops by pinning the contact lines in a horizontal tensile range of 0–200%. By means of experiments and model, we demonstrate that the ductility of drops is relied on the height-to-spacing ratio of the individual pattern and the intrinsic contact angle. Moreover, the change of drop size was utilized to measure the applied strain and liquid viscosity, enabling a strain sensitivity as high as 1068 μm2/%. The proposed laser-etched stretchable graphene–polymer composite has potential applications in DNA microarrays, biological assays, soft robots, and so on.
|
|
4. |
- Kumar, S., et al.
(författare)
-
Additive-Driven Interfacial Engineering of Aluminum Metal Anode for Ultralong Cycling Life
- 2023
-
Ingår i: Nano-Micro Letters. - : Springer Science and Business Media LLC. - 2311-6706 .- 2150-5551. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- Rechargeable Al batteries (RAB) are promising candidates for safe and environmentally sustainable battery systems with low-cost investments. However, the currently used aluminum chloride-based electrolytes present a significant challenge to commercialization due to their corrosive nature. Here, we report for the first time, a novel electrolyte combination for RAB based on aluminum trifluoromethanesulfonate (Al(OTf)(3)) with tetrabutylammonium chloride (TBAC) additive in diglyme. The presence of a mere 0.1 M of TBAC in the Al(OTf)(3) electrolyte generates the charge carrying electrochemical species, which forms the basis of reaction at the electrodes. TBAC reduces the charge transfer resistance and the surface activation energy at the anode surface and also augments the dissociation of Al(OTf)(3) to generate the solid electrolyte interphase components. Our electrolyte's superiority directly translates into reduced anodic overpotential for cells that ran for 1300 cycles in Al plating/stripping tests, the longest cycling life reported to date. This unique combination of salt and additive is non-corrosive, exhibits a high flash point and is cheaper than traditionally reported RAB electrolyte combinations, which makes it commercially promising. Through this report, we address a major roadblock in the commercialization of RAB and inspire equivalent electrolyte fabrication approaches for other metal anode batteries.
|
|
5. |
- Li, Youbing, et al.
(författare)
-
Electrochemical Lithium Storage Performance of Molten Salt Derived V2SnC MAX Phase
- 2021
-
Ingår i: Nano-Micro Letters. - : Springer. - 2311-6706 .- 2150-5551. ; 13:1
-
Tidskriftsartikel (refereegranskat)abstract
- MAX phases are gaining attention as precursors of two-dimensional MXenes that are intensively pursued in applications for electrochemical energy storage. Here, we report the preparation of V2SnC MAX phase by the molten salt method. V2SnC is investigated as a lithium storage anode, showing a high gravimetric capacity of 490 mAh g(-1) and volumetric capacity of 570 mAh cm(-3) as well as superior rate performance of 95 mAh g(-1) (110 mAh cm(-3)) at 50 C, surpassing the ever-reported performance of MAX phase anodes. Supported by operando X-ray diffraction and density functional theory, a charge storage mechanism with dual redox reaction is proposed with a Sn-Li (de)alloying reaction that occurs at the edge sites of V2SnC particles where Sn atoms are exposed to the electrolyte followed by a redox reaction that occurs at V2C layers with Li. This study offers promise of using MAX phases with M-site and A-site elements that are redox active as high-rate lithium storage materials.
|
|
6. |
- Lu, Yahua, et al.
(författare)
-
Engineer Nanoscale Defects into Selective Channels : MOF-Enhanced Li+ Separation by Porous Layered Double Hydroxide Membrane
- 2023
-
Ingår i: Nano-Micro Letters. - 2311-6706. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- Two-dimensional (2D) membrane-based ion separation technology has been increasingly explored to address the problem of lithium resource shortage, yet it remains a sound challenge to design 2D membranes of high selectivity and permeability for ion separation applications. Zeolitic imidazolate framework functionalized modified layered double hydroxide (ZIF-8@MLDH) composite membranes with high lithium-ion (Li+) permeability and excellent operational stability were obtained in this work by in situ depositing functional ZIF-8 nanoparticles into the nanopores acting as framework defects in MLDH membranes. The defect-rich framework amplified the permeability of Li+, and the site-selective growth of ZIF-8 in the framework defects bettered its selectivity. Specifically speaking, the ZIF-8@MLDH membranes featured a high permeation rate of Li+ up to 1.73 mol m−2 h−1 and a desirable selectivity of Li+/Mg2+ up to 31.9. Simulations supported that the simultaneously enhanced selectivity and permeability of Li+ are attributed to changes in the type of mass transfer channels and the difference in the dehydration capacity of hydrated metal cations when they pass through nanochannels of ZIF-8. This study will inspire the ongoing research of high-performance 2D membranes through the engineering of defects.
|
|
7. |
- Wang, N., et al.
(författare)
-
Structure, Performance, and Application of BiFeO3 Nanomaterials
- 2020
-
Ingår i: Nano-Micro Letters. - : Springer Science and Business Media LLC. - 2150-5551 .- 2311-6706. ; 12:1
-
Tidskriftsartikel (refereegranskat)abstract
- Multiferroic nanomaterials have attracted great interest due to simultaneous two or more properties such as ferroelectricity, ferromagnetism, and ferroelasticity, which can promise a broad application in multifunctional, low-power consumption, environmentally friendly devices. Bismuth ferrite (BiFeO3, BFO) exhibits both (anti)ferromagnetic and ferroelectric properties at room temperature. Thus, it has played an increasingly important role in multiferroic system. In this review, we systematically discussed the developments of BFO nanomaterials including morphology, structures, properties, and potential applications in multiferroic devices with novel functions. Even the opportunities and challenges were all analyzed and summarized. We hope this review can act as an updating and encourage more researchers to push on the development of BFO nanomaterials in the future.
|
|
8. |
- Zhang, Fengying, et al.
(författare)
-
Formamidinium Lead Bromide (FAPbBr3) Perovskite Microcrystals for Sensitive and Fast Photodetectors
- 2018
-
Ingår i: Nano-Micro Letters. - : Springer Science and Business Media LLC. - 2311-6706 .- 2150-5551. ; 10:3
-
Tidskriftsartikel (refereegranskat)abstract
- Because of the good thermal stability and superior carrier transport characteristics of formamidinium lead trihalide perovskite HC(NH2)2PbX3 (FAPbX3), it has been considered to be a better optoelectronic material than conventional CH3NH3PbX3 (MAPbX3). Herein, we fabricated a FAPbBr3 microcrystal-based photodetector that exhibited a good responsivity of 4000 A W−1 and external quantum efficiency up to 106% under one-photon excitation, corresponding to the detectivity greater than 1014 Jones. The responsivity is two orders of magnitude higher than that of previously reported formamidinium perovskite photodetectors. Furthermore, the FAPbBr3 photodetector’s responsivity to two-photon absorption with an 800-nm excitation source can reach 0.07 A W−1, which is four orders of magnitude higher than that of its MAPbBr3 counterparts. The response time of this photodetector is less than 1 ms. This study provides solid evidence that FAPbBr3 can be an excellent candidate for highly sensitive and fast photodetectors.[Figure not available: see fulltext.].
|
|
9. |
- Zhang, Lixiu, et al.
(författare)
-
Advances in the Application of Perovskite Materials
- 2023
-
Ingår i: NANO-MICRO LETTERS. - : SHANGHAI JIAO TONG UNIV PRESS. - 2311-6706. ; 15:1
-
Forskningsöversikt (refereegranskat)abstract
- Nowadays, the soar of photovoltaic performance of perovskite solar cells has set off a fever in the study of metal halide perovskite materials. The excellent optoelectronic properties and defect tolerance feature allow metal halide perovskite to be employed in a wide variety of applications. This article provides a holistic review over the current progress and future prospects of metal halide perovskite materials in representative promising applications, including traditional optoelectronic devices (solar cells, light-emitting diodes, photodetectors, lasers), and cutting-edge technologies in terms of neuromorphic devices (artificial synapses and memristors) and pressure-induced emission. This review highlights the fundamentals, the current progress and the remaining challenges for each application, aiming to provide a comprehensive overview of the development status and a navigation of future research for metal halide perovskite materials and devices.
|
|
10. |
- Zhang, Yifei, et al.
(författare)
-
Superionic Conductivity in Ceria-Based Heterostructure Composites for Low-Temperature Solid Oxide Fuel Cells
- 2020
-
Ingår i: Nano-Micro Letters. - : Springer Science and Business Media LLC. - 2150-5551 .- 2311-6706. ; 12:1
-
Tidskriftsartikel (refereegranskat)abstract
- Ceria-based heterostructure composite (CHC) has become a new stream to develop advanced low-temperature (300–600 °C) solid oxide fuel cells (LTSOFCs) with excellent power outputs at 1000 mW cm−2 level. The state-of-the-art ceria–carbonate or ceria–semiconductor heterostructure composites have made the CHC systems significantly contribute to both fundamental and applied science researches of LTSOFCs; however, a deep scientific understanding to achieve excellent fuel cell performance and high superionic conduction is still missing, which may hinder its wide application and commercialization. This review aims to establish a new fundamental strategy for superionic conduction of the CHC materials and relevant LTSOFCs. This involves energy band and built-in-field assisting superionic conduction, highlighting coupling effect among the ionic transfer, band structure and alignment impact. Furthermore, theories of ceria–carbonate, e.g., space charge and multi-ion conduction, as well as new scientific understanding are discussed and presented for functional CHC materials.
|
|