1. |
- Karlson, Björn W., 1953, et al.
(author)
-
A Pharmacokinetic and Pharmacodynamic Comparison of Immediate-Release Metoprolol and Extended-Release Metoprolol CR/XL in Patients with Suspected Acute Myocardial Infarction : A Randomized, Open-Label Study
- 2014
-
In: Cardiology. - : S. Karger AG. - 0008-6312 .- 1421-9751. ; 127:2, s. 73-82
-
Journal article (peer-reviewed)abstract
- Background: Previous metoprolol studies in myocardial infarction patients were performed with immediate-release (IR) metoprolol. This study aims to evaluate if extended-release metoprolol CR/XL once daily gives a similar β-blockade over 24 h compared to multiple dosing of metoprolol IR. Methods: After 2 days of routine metoprolol treatment, 27 patients with suspected acute myocardial infarction were randomized to open-label treatment with metoprolol IR (50 mg four times daily or 100 mg twice daily) or metoprolol CR/XL 200 mg once daily for 3 days. Results: Metoprolol CR/XL 200 mg once daily gave more pronounced suppression of peak heart rate, with lower peak and less variation in peak to trough plasma levels. There were no differences in AUC between the CR/XL and IR formulations, although the trough plasma metoprolol levels were comparable for metoprolol CR/XL 200 mg once daily and metoprolol IR 50 mg four times daily, but lower for metoprolol IR 100 mg twice daily. Both treatments were well tolerated. Conclusions: Metoprolol CR/XL 200 mg once daily showed lower peak and less variation in peak to trough plasma levels compared to multiple dosing of metoprolol IR with the same AUC. This was accompanied by a more uniform β-blockade over time, which was reflected by heart rate, and a more pronounced suppression of peak heart rate with similar tolerability. This suggests metoprolol CR/XL may be used as an alternative to metoprolol IR in patients with myocardial infarction.
|
|
2. |
- Lee, S. -K, et al.
(author)
-
Reduction of the barrier height and enhancement of tunneling current of titanium contacts using embedded Au nano-particles on 4H and 6H silicon carbide
- 2002
-
In: Materials Science Forum. - : Trans Tech Publications Inc.. - 0255-5476 .- 1662-9752. ; 389-393:2, s. 937-940
-
Journal article (peer-reviewed)abstract
- We have investigated the electrical characteristics of Ti Schottky contacts with embedded Au nano-particles on various types of epilayers of SiC (4H- and 6H-SiC). From our current-voltage (I-V) and capacitance-voltage (C-V) measurements, we observed that Ti Schottky contacts with embedded Au nano-particles had 0.19 eV (n-4H-SiC) and 0.15 eV (n-6H-SiC) lower barrier height than those of particle free Ti Schottky contacts. In order to understand this reduction of the Schottky barrier height (SBH) for Ti Schottky contacts with embedded Au nano-particles, it has been proposed that SBH lowering is caused by an enhanced electric field due to the small size of the Au nano-particles and the large SBH difference. We have also tested these contacts on highly doped n-and p-type SiC material to study ohmic contacts using linear TLM measurements.
|
|
3. |
- Ala-Laurinaho, J., et al.
(author)
-
TUMESA - MEMS tuneable metamaterials for smart wireless applications
- 2012
-
In: European Microwave Week 2012: "Space for Microwaves", EuMW 2012, Conference Proceedings - 7th European Microwave Integrated Circuits Conference, EuMIC 2012. - : IEEE. - 9782874870286 ; , s. 95-98
-
Conference paper (peer-reviewed)abstract
- This paper describes the main results of the EU FP7 project TUMESA - MEMS tuneable metamaterials for smart wireless applications. In this project, we studied several reconfigurable antenna approaches that combine the new technology of MEMS with the new concept of artificial electromagnetic materials and surfaces (metamaterials and metasurfaces) for realisation of millimetre wave phase shifters and beam-steering devices. MEMS technology allows to miniaturise electronic components, reduce their cost in batch production, and effectively compete with semiconductor and ferroelectric based technologies in terms of losses at millimetre wavelengths. Novel tuneable materials and components proposed in this project perform as smart beam steering devices. Fabricated with MEMS technology in batch and on a single chip, proposed tuneable devices allow substituting of larger and more complex sub-system of, e.g., a radar sensor. This substitution provides a dramatic cost reduction on a system level.
|
|
4. |
|
|
5. |
- Alvez, Maria Bueno, et al.
(author)
-
Next generation pan-cancer blood proteome profiling using proximity extension assay
- 2023
-
In: Nature Communications. - : Springer Nature. - 2041-1723. ; 14:1
-
Journal article (peer-reviewed)abstract
- A comprehensive characterization of blood proteome profiles in cancer patients can contribute to a better understanding of the disease etiology, resulting in earlier diagnosis, risk stratification and better monitoring of the different cancer subtypes. Here, we describe the use of next generation protein profiling to explore the proteome signature in blood across patients representing many of the major cancer types. Plasma profiles of 1463 proteins from more than 1400 cancer patients are measured in minute amounts of blood collected at the time of diagnosis and before treatment. An open access Disease Blood Atlas resource allows the exploration of the individual protein profiles in blood collected from the individual cancer patients. We also present studies in which classification models based on machine learning have been used for the identification of a set of proteins associated with each of the analyzed cancers. The implication for cancer precision medicine of next generation plasma profiling is discussed.
|
|
6. |
- Andersson, Maria, et al.
(author)
-
Local and Systemic Immunity During Five Vaccinations Against SARS-CoV-2 in Zanubrutinib-Treated Patients With Chronic Lymphocytic Leukemia
- 2023
-
In: Journal of Hematology. - : Elmer Press, Inc.. - 1927-1212 .- 1927-1220. ; 12:4, s. 170-175
-
Journal article (peer-reviewed)abstract
- Background: Patients with chronic lymphocytic leukemia (CLL) are vulnerable to coronavirus disease 2019 (COVID-19) and are at risk of inferior response to severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) vaccination, especially if treated with the first-generation Bruton’s tyrosine kinase inhibitor (BTKi) ibrutinib. We aimed to evaluate the impact of the third-generation BTKi, zanubrutinib, on systemic and mucosal response to SARS-CoV-2 vaccination.Methods: Nine patients with CLL with ongoing zanubrutinib therapy were included and donated blood and saliva during SARS-CoV-2 vaccination, before vaccine doses 3 and 5 and 2 - 3 weeks after doses 3, 4, and 5. Ibrutinib-treated control patients (n = 7) and healthy aged-matched controls (n = 7) gave blood 2 - 3 weeks after vaccine dose 5. We quantified reactivity and neutralization capacity of SARS-CoV-2-specific IgG and IgA antibodies (Abs) in both serum and saliva, and reactivity of T cells activated with viral peptides.Results: Both zanubrutinib- and ibrutinib-treated patients had significantly, up to 1,000-fold, lower total spike-specific Ab levels after dose 5 compared to healthy controls (P < 0.01). Spike-IgG levels in serum from zanubrutinib-treated patients correlated well to neutralization capacity (r = 0.68; P < 0.0001) and were thus functional. Mucosal immunity (specific IgA in serum and saliva) was practically absent in zanubrutinib-treated patients even after five vaccine doses, whereas healthy controls had significantly higher levels (tested in serum after vaccine dose 5) (P < 0.05). In contrast, T-cell reactivity against SARS-CoV-2 peptides was equally high in zanubrutinib- and ibrutinib-treated patients as in healthy control donors.Conclusions: In our small cohort of zanubrutinib-treated CLL patients, we conclude that up to five doses of SARS-CoV-2 vaccination induced no detectable IgA mucosal immunity, which likely will impair the primary barrier defence against the infection. Systemic IgG responses were also impaired, whereas T-cell responses were normal. Further and larger studies are needed to evaluate the impact of these findings on disease protection.
|
|
7. |
- Baghchehsaraei, Zargham, 1982-, et al.
(author)
-
Integration of microwave MEMS devices into rectangular waveguide with conductive polymer interposers
- 2013
-
In: Journal of Micromechanics and Microengineering. - : IOP Publishing. - 0960-1317 .- 1361-6439. ; 23:12, s. 125020-
-
Journal article (peer-reviewed)abstract
- This paper investigates a novel method of integrating microwave microelectromechanical systems (MEMS) chips into millimeter-wave rectangular waveguides. The fundamental difficulties of merging micromachined with macromachined microwave components, in particular, surface topography, roughness, mechanical stress points and air gaps interrupting the surface currents, are overcome by a double-side adhesive conductive polymer interposer. This interposer provides a uniform electrical contact, stable mechanical connection and a compliant stress distribution interlayer between the MEMS chip and a waveguide frame. The integration method is successfully implemented both for prototype devices of MEMS-tuneable reflective metamaterial surfaces and for MEMS reconfigurable transmissive surfaces. The measured insertion loss of the novel conductive polymer interface is less than 0.4 dB in the E-band (60-90 GHz), as compared to a conventional assembly with an air gap of 2.5 dB loss. Moreover, both dc biasing lines and mechanical feedthroughs to actuators outside the waveguide are demonstrated in this paper, which is achieved by structuring the polymer sheet xurographically. Finite element method simulations were carried out for analyzing the influence of different parameters on the radio frequency performance.
|
|
8. |
|
|
9. |
|
|
10. |
- Bjornstad, Kristian, et al.
(author)
-
Validation of the Endopep-MS method for qualitative detection of active botulinum neurotoxins in human and chicken serum
- 2014
-
In: Analytical and Bioanalytical Chemistry. - : Springer Science and Business Media LLC. - 1618-2642 .- 1618-2650. ; 406:28, s. 7149-7161
-
Journal article (peer-reviewed)abstract
- Botulinum neurotoxins (BoNTs) are highly toxic proteases produced by anaerobic bacteria. Traditionally, a mouse bioassay (MBA) has been used for detection of BoNTs, but for a long time, laboratories have worked with alternative methods for their detection. One of the most promising in vitro methods is a combination of an enzymatic and mass spectrometric assay called Endopep-MS. However, no comprehensive validation of the method has been presented. The main purpose of this work was to perform a validation for the qualitative analysis of BoNT-A, B, C, C/D, D, D/C, and F in serum. The limit of detection (LOD), selectivity, precision, stability in matrix and solution, and correlation with the MBA were evaluated. The LOD was equal to or even better than that of the MBA for BoNT-A, B, D/C, E, and F. Furthermore, Endopep-MS was for the first time successfully used to differentiate between BoNT-C and D and their mosaics C/D and D/C by different combinations of antibodies and target peptides. In addition, sequential antibody capture was presented as a new way to multiplex the method when only a small sample volume is available. In the comparison with the MBA, all the samples analyzed were positive for BoNT-C/D with both methods. These results indicate that the Endopep-MS method is a valid alternative to the MBA as the gold standard for BoNT detection based on its sensitivity, selectivity, and speed and that it does not require experimental animals.
|
|