1. |
- Aitola, M, et al.
(author)
-
Aint/Tacc3 is highly expressed in proliferating mouse tissues during development, spermatogenesis, and oogenesis
- 2003
-
In: The journal of histochemistry and cytochemistry : official journal of the Histochemistry Society. - : SAGE Publications. - 0022-1554. ; 51:4, s. 455-469
-
Journal article (peer-reviewed)abstract
- Aint was originally identified on the basis of its interaction in vitro with the aryl hydrocarbon nuclear receptor translocator (Arnt). Arnt is a common heterodimerization partner in the basic helix-loop–helix (bHLH)-PER-ARNT-SIM (PAS) protein family and is involved in diverse biological functions. These include xenobiotic metabolism, hypoxic response, and circadian rhythm. In addition, Arnt has a crucial role during development. Aint is a member of a growing family of transforming acidic coiled-coil (TACC) proteins and is the murine homologue of human TACC3. Here we report the spatiotemporal expression of Tacc3 mRNA and protein in embryonic, postnatally developing, and adult mouse tissues using in situ hybridization and immunocytochemistry. Tacc3 mRNA was highly expressed in proliferating cells of several organs during murine development. However, the only adult tissues expressing high levels were testis and ovary. Immunocytochemistry revealed that Tacc3 is a nuclear protein. Our results suggest that Tacc3 has an important role in murine development, spermatogenesis, and oogenesis.
|
|
2. |
|
|
3. |
|
|
4. |
|
|
5. |
- Aitola, Kerttu, et al.
(author)
-
Carbon nanotube-based hybrid hole-transporting material and selective contact for high efficiency perovskite solar cells
- 2016
-
In: Energy & Environmental Science. - : Royal Society of Chemistry (RSC). - 1754-5692 .- 1754-5706. ; 9:2, s. 461-466
-
Journal article (peer-reviewed)abstract
- We demonstrate a high efficiency perovskite solar cell with a hybrid hole-transporting material-counter electrode based on a thin single-walled carbon nanotube (SWCNT) film and a drop-cast 2,2,7,-7-tetrakis(N, N-di-p-methoxyphenylamine)-9,90-spirobifluorene (Spiro-OMeTAD) hole-transporting material (HTM). The average efficiency of the solar cells was 13.6%, with the record cell yielding 15.5% efficiency. The efficiency of the reference solar cells with spin-coated Spiro-OMeTAD hole-transportingmaterials (HTMs) and an evaporated gold counter electrode was 17.7% (record 18.8%), that of the cells with only a SWCNT counter electrode (CE) without additional HTM was 9.1% (record 11%) and that of the cells with gold deposited directly on the perovskite layer was 5% (record 6.3%). Our results show that it is possible to manufacture high efficiency perovskite solar cells with thin film (thickness less than 1 mu m) completely carbon-based HTMCEs using industrially upscalable manufacturing methods, such as press-transferred CEs and drop-cast HTMs.
|
|
6. |
- Aitola, Kerttu, et al.
(author)
-
High Temperature-Stable Perovskite Solar Cell Based on Low-Cost Carbon Nanotube Hole Contact
- 2017
-
In: Advanced Materials. - : Wiley-VCH Verlagsgesellschaft. - 0935-9648 .- 1521-4095. ; 29:17
-
Journal article (peer-reviewed)abstract
- Mixed ion perovskite solar cells (PSC) are manufactured with a metal-free hole contact based on press-transferred single-walled carbon nanotube (SWCNT) film infiltrated with 2,2,7,-7-tetrakis(N, N-di-p-methoxyphenylamine)-9,90-spirobifluorene (Spiro-OMeTAD). By means of maximum power point tracking, their stabilities are compared with those of standard PSCs employing spin-coated Spiro-OMeTAD and a thermally evaporated Au back contact, under full 1 sun illumination, at 60 degrees C, and in a N-2 atmosphere. During the 140 h experiment, the solar cells with the Au electrode experience a dramatic, irreversible efficiency loss, rendering them effectively nonoperational, whereas the SWCNT-contacted devices show only a small linear efficiency loss with an extrapolated lifetime of 580 h.
|
|
7. |
- Hua, Yong, et al.
(author)
-
Facile synthesis of fluorene-based hole transport materials for highly efficient perovskite solar cells and solid-state dye-sensitized solar cells
- 2016
-
In: Nano Energy. - : Elsevier. - 2211-2855 .- 2211-3282. ; 26, s. 108-113
-
Journal article (peer-reviewed)abstract
- Two novel low-cost fluorene-based hole transport materials (HTMs) HT1 and HT2 as alternatives to the expensive HTM Spiro-OMeTAD have been designed and synthesized for the application in perovskite solar cells (PSCs) and solid-state dye-sensitized solar cell (ssDSCs). The two HTMs were prepared through a facile two-step reaction from cheap starting material and with a total yield higher than 90%. These HTMs exhibit good solubility and charge-transport ability. PSCs based on HT2 achieved power conversion efficiency (PCE) of 18.04% under air conditions, which is comparable to that of the cell employing the commonly used Spiro-OMeTAD (18.27%), while HT1-based cell showed a slightly worse performance with a PCE of 17.18%. For ssDSCs, the HT2-based device yielded a PCE of 6.35%, which is also comparable to that of a cell fabricated based on Spiro-OMeTAD (6.36%). We found that the larger dimensional structure and molecular weight of HT2 enable better photovoltaic performance than that of the smaller one HT1. These results show that easily synthesized fluorene-based HTMs have great potential to replace the expensive Spiro-OMeTAD for both PSCs and ssDSCs.
|
|
8. |
- Park, Byung-wook, et al.
(author)
-
Understanding Interfacial Charge Transfer between Metallic PEDOT Counter Electrodes and a Cobalt Redox Shuttle in Dye-Sensitized Solar Cells
- 2014
-
In: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 6:3, s. 2074-2079
-
Journal article (peer-reviewed)abstract
- Conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) doped with iron(111) tris-p-toluenesulfonate (PEDOT:Tos) having metallic conductivity was coated onto fluorine-doped tin oxide (FTO) glass and plain glass substrates and used as a counter electrode (CE) in a dye-sensitized solar cell (DSC) with a [Co(bpy)(3)](3+/2+) complex redox shuttle. DSCs with PEDOT:Tos/glass CE yielded power conversion efficiencies (PCE) of 6.3%, similar to that of DSCs with platinized FTO glass CE (6.1%). The PEDOT:Tos-based counter electrodes had 5 to 10 times lower charge-transfer resistance than the Pt/FTO CE in DSCs, as analyzed by impedance spectroscopy. More detailed studies in symmetrical CE-CE cells showed that the PEDOT:Tos layers are nanoporous. Not all internal area can be used catalytically under solar cell conditions and effective charge-transfer resistance was similar to that of Pt/FTO.
|
|
9. |
- Sveinbjornsson, Kari, et al.
(author)
-
Preparation of mixed-ion and inorganic perovskite films using water and isopropanol as solvents for solar cell applications
- 2018
-
In: Sustainable Energy & Fuels. - : Royal Society of Chemistry. - 2398-4902. ; 2:3, s. 606-615
-
Journal article (peer-reviewed)abstract
- Presently, the most efficient lead halide perovskite solar cells are manufactured by using high-boiling point organic solvents to dissolve the perovskite precursor materials prior to the perovskite formation. Previously, efforts have been made to exchange the said solvents for water with some success. Herein, we build on that work to develop a procedure for synthesising perovskite absorbers using only water and isopropanol as solvents. Our technique can be utilised for fabricating many different perovskite compositions, organic and inorganic. The technique is based on the high solubility of metal nitrates, such as lead(ii) nitrate and caesium(i) nitrate, in water and, respectively, their poor solubilities in isopropanol. The inclusion of CsNO3 to Pb(NO3)(2) films does not result in a phase separation of the perovskite material as one would expect when using lead(ii) halide precursor films. Using the perovskite composition Cs(0.1)FA(0.9)Pb(I0.83Br0.17)(3) we were able to reach an average solar cell power conversion efficiency of 13.0%. Furthermore, the technique can be applied to many different perovskite compositions making it appealing for large-scale manufacturing of perovskite solar cells.
|
|
10. |
- Sveinbjörnsson, Kári, et al.
(author)
-
Ambient air-processed mixed-ion perovskites for high-efficiency solar cells
- 2016
-
In: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 4:42, s. 16536-16545
-
Journal article (peer-reviewed)abstract
- Mixed-ion (FAPbI(3))(1-x)(MAPbBr(3))(x) perovskite solar cells have achieved power conversion efficiencies surpassing 20%. However, in order to obtain these high efficiencies the preparation is performed in a controlled inert atmosphere. Here, we report a procedure for manufacturing highly efficient solar cells with a mixed-ion perovskite in ambient atmosphere. By including a heating step at moderate temperatures of the mesoporous titanium dioxide substrates, and spin-coating the perovskite solution on the warm substrates in ambient air, a red intermediate phase is obtained. Annealing the red phase at 100 degrees C results in a uniform and crystalline perovskite film, whose thickness is dependent on the substrate temperature prior to spin-coating. The temperature was optimized between 20 and 100 degrees C and it was observed that 50 degrees C substrate temperature yielded the best solar cell performances. The average efficiency of the best device was 17.6%, accounting for current-voltage (I-V) measurement hysteresis, with 18.8% performance in the backward scan direction and 16.4% in the forward scan direction. Our results show that it is possible to manufacture high-efficiency mixed-ion perovskite solar cells under ambient conditions, which is relevant for large-scale and low-cost device manufacturing processing.
|
|