1. |
- Biollaz, S., et al.
(author)
-
Gas analysis in gasification of biomass and waste : Guideline report: Document 1
- 2018
-
Reports (peer-reviewed)abstract
- Gasification is generally acknowledged as one of the technologies that will enable the large-scale production of biofuels and chemicals from biomass and waste. One of the main technical challenges associated to the deployment of biomass gasification as a commercial technology is the cleaning and upgrading of the product gas. The contaminants of product gas from biomass/waste gasification include dust, tars, alkali metals, BTX, sulphur-, nitrogen- and chlorine compounds, and heavy metals. Proper measurement of the components and contaminants of the product gas is essential for the monitoring of gasification-based plants (efficiency, product quality, by-products), as well as for the proper design of the downstream gas cleaning train (for example, scrubbers, sorbents, etc.). In practice, a trade-off between reliability, accuracy and cost has to be reached when selecting the proper analysis technique for a specific application. The deployment and implementation of inexpensive yet accurate gas analysis techniques to monitor the fate of gas contaminants might play an important role in the commercialization of biomass and waste gasification processes.This special report commissioned by the IEA Bioenergy Task 33 group compiles a representative part of the extensive work developed in the last years by relevant actors in the field of gas analysis applied to(biomass and waste) gasification. The approach of this report has been based on the creation of a team of contributing partners who have supplied material to the report. This networking approach has been complemented with a literature review. The report is composed of a set of 2 documents. Document 1(the present report) describes the available analysis techniques (both commercial and underdevelopment) for the measurement of different compounds of interest present in gasification gas. The objective is to help the reader to properly select the analysis technique most suitable to the target compounds and the intended application. Document 1 also describes some examples of application of gas analysis at commercial-, pilot- and research gasification plants, as well as examples of recent and current joint research activities in the field. The information contained in Document 1 is complemented with a book of factsheets on gas analysis techniques in Document 2, and a collection of video blogs which illustrate some of the analysis techniques described in Documents 1 and 2.This guideline report would like to become a platform for the reinforcement of the network of partners working on the development and application of gas analysis, thus fostering collaboration and exchange of knowledge. As such, this report should become a living document which incorporates in future coming progress and developments in the field.
|
|
2. |
- Biollaz, S., et al.
(author)
-
Gas analysis in gasification of biomass and waste : Guideline report: Document 2 - Factsheets on gas analysis techniques
- 2018
-
Reports (peer-reviewed)abstract
- Gasification is generally acknowledged as one of the technologies that will enable the large-scale production of biofuels and chemicals from biomass and waste. One of the main technical challenges associated to the deployment of biomass gasification as a commercial technology is the cleaning and upgrading of the product gas. The contaminants of product gas from biomass/waste gasification include dust, tars, alkali metals, BTX, sulphur-, nitrogen- and chlorine compounds, and heavy metals. Proper measurement of the components and contaminants of the product gas is essential for the monitoring of gasification-based plants (efficiency, product quality, by-products), as well as for the proper design of the downstream gas cleaning train (for example, scrubbers, sorbents, etc.). The deployment and implementation of inexpensive yet accurate gas analysis techniques to monitor the fate of gas contaminants might play an important role in the commercialization of biomass and waste gasification processes.This special report commissioned by the IEA Bioenergy Task 33 group compiles a representative part of the extensive work developed in the last years by relevant actors in the field of gas analysis applied to (biomass and waste) gasification. The approach of this report has been based on the creation of a team of contributing partners who have supplied material to the report. This networking approach has been complemented with a literature review. This guideline report would like to become a platform for the reinforcement of the network of partners working on the development and application of gas analysis, thus fostering collaboration and exchange of knowledge. As such, this report should become a living document which incorporates in future coming progress and developments in the field.
|
|
3. |
|
|
4. |
|
|
5. |
|
|
6. |
- Rangelow, I. W., et al.
(author)
-
Piezoresistive and self-actuated 128-cantilever arrays for nanotechnology applications
- 2007
-
In: Microelectronic Engineering. - : Elsevier BV. - 0167-9317 .- 1873-5568. ; 84:5-8, s. 1260-1264
-
Journal article (peer-reviewed)abstract
- A major limitation for future nanotechnology, particularly for bottom-up manufacturing is the non-availability of 2-dimensional massively parallel probe arrays. Scanning proximity probes are uniquely powerful tools for analysis, manipulation and bottom-up synthesis: they are capable of addressing and engineering surfaces at the atomic level and are the key to unlocking the full potential of Nanotechnology. Generic massively parallel intelligent cantilever-probe platforms is demonstrated through a number of existing and ground-breaking techniques. A packaged VLSI NEMS-chip (Very Large Scale Integrated Nano Electro Mechanical System) incorporating 128 proximal probes, fully addressable with control and readout interconnects and advanced software will be presented.
|
|
7. |
- Almansa, A., et al.
(author)
-
Fingerprint enhancement by shape adaptation of scale-space operators with automatic scale selection
- 2000
-
In: IEEE Transactions on Image Processing. - : IEEE Signal Processing Society. - 1057-7149 .- 1941-0042. ; 9:12, s. 2027-2042
-
Journal article (peer-reviewed)abstract
- This work presents two mechanisms for processing fingerprint images; shape-adapted smoothing based on second moment descriptors and automatic scale selection based on normalized derivatives. The shape adaptation procedure adapts the smoothing operation to the local ridge structures, which allows interrupted ridges to be joined without destroying essential singularities such as branching points and enforces continuity of their directional fields. The Scale selection procedure estimates local ridge width and adapts the amount of smoothing to the local amount of noise. In addition, a ridgeness measure is defined, which reflects how well the local image structure agrees with a qualitative ridge model, and is used for spreading the results of shape adaptation into noisy areas. The combined approach makes it possible to resolve fine scale structures in clear areas while reducing the risk of enhancing noise in blurred or fragmented areas. The result is a reliable and adaptively detailed estimate of the ridge orientation field and ridge width, as well as a Smoothed grey-level version of the input image. We propose that these general techniques should be of interest to developers of automatic fingerprint identification systems as well as in other applications of processing related types of imagery.
|
|
8. |
- Cajander, Sara, 1980-, et al.
(author)
-
Profiling the dysregulated immune response in sepsis : overcoming challenges to achieve the goal of precision medicine
- 2024
-
In: The Lancet Respiratory Medicine. - : Elsevier. - 2213-2600 .- 2213-2619. ; 12:4, s. 305-322
-
Research review (peer-reviewed)abstract
- Sepsis is characterised by a dysregulated host immune response to infection. Despite recognition of its significance, immune status monitoring is not implemented in clinical practice due in part to the current absence of direct therapeutic implications. Technological advances in immunological profiling could enhance our understanding of immune dysregulation and facilitate integration into clinical practice. In this Review, we provide an overview of the current state of immune profiling in sepsis, including its use, current challenges, and opportunities for progress. We highlight the important role of immunological biomarkers in facilitating predictive enrichment in current and future treatment scenarios. We propose that multiple immune and non-immune-related parameters, including clinical and microbiological data, be integrated into diagnostic and predictive combitypes, with the aid of machine learning and artificial intelligence techniques. These combitypes could form the basis of workable algorithms to guide clinical decisions that make precision medicine in sepsis a reality and improve patient outcomes.
|
|
9. |
|
|
10. |
- Osuchowski, Marcin F., et al.
(author)
-
The COVID-19 puzzle : deciphering pathophysiology and phenotypes of a new disease entity
- 2021
-
In: The Lancet Respiratory Medicine. - : Elsevier. - 2213-2600 .- 2213-2619. ; 9:6, s. 622-642
-
Research review (peer-reviewed)abstract
- The zoonotic SARS-CoV-2 virus that causes COVID-19 continues to spread worldwide, with devastating consequences. While the medical community has gained insight into the epidemiology of COVID-19, important questions remain about the clinical complexities and underlying mechanisms of disease phenotypes. Severe COVID-19 most commonly involves respiratory manifestations, although other systems are also affected, and acute disease is often followed by protracted complications. Such complex manifestations suggest that SARS-CoV-2 dysregulates the host response, triggering wide-ranging immuno-inflammatory, thrombotic, and parenchymal derangements. We review the intricacies of COVID-19 pathophysiology, its various phenotypes, and the anti-SARS-CoV-2 host response at the humoral and cellular levels. Some similarities exist between COVID-19 and respiratory failure of other origins, but evidence for many distinctive mechanistic features indicates that COVID-19 constitutes a new disease entity, with emerging data suggesting involvement of an endotheliopathy-centred pathophysiology. Further research, combining basic and clinical studies, is needed to advance understanding of pathophysiological mechanisms and to characterise immuno-inflammatory derangements across the range of phenotypes to enable optimum care for patients with COVID-19.
|
|