| 1. |
|
|
| 2. |
- Abdollahi Sani, Negar, et al.
(author)
-
Flexible lamination-fabricated ultra-high frequency diodes based on self-supporting semiconducting composite film of silicon micro-particles and nano-fibrillated cellulose
- 2016
-
In: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 6
-
Journal article (peer-reviewed)abstract
- Low cost and flexible devices such as wearable electronics, e-labels and distributed sensors will make the future "internet of things" viable. To power and communicate with such systems, high frequency rectifiers are crucial components. We present a simple method to manufacture flexible diodes, operating at GHz frequencies, based on self-adhesive composite films of silicon micro-particles (Si-ΌPs) and glycerol dispersed in nanofibrillated cellulose (NFC). NFC, Si-ΌPs and glycerol are mixed in a water suspension, forming a self-supporting nanocellulose-silicon composite film after drying. This film is cut and laminated between a flexible pre-patterned Al bottom electrode and a conductive Ni-coated carbon tape top contact. A Schottky junction is established between the Al electrode and the Si-ΌPs. The resulting flexible diodes show current levels on the order of mA for an area of 2 mm2, a current rectification ratio up to 4 × 103 between 1 and 2 V bias and a cut-off frequency of 1.8 GHz. Energy harvesting experiments have been demonstrated using resistors as the load at 900 MHz and 1.8 GHz. The diode stack can be delaminated away from the Al electrode and then later on be transferred and reconfigured to another substrate. This provides us with reconfigurable GHz-operating diode circuits.
|
|
| 3. |
- Andersson Ersman, Peter, et al.
(author)
-
Flexible Active Matrix Addressed Displays Manufactured by Screen Printing
- 2020
-
In: Advanced Engineering Materials. - : Wiley-VCH Verlag. - 1438-1656 .- 1527-2648. ; 23
-
Journal article (peer-reviewed)abstract
- A flexible, electrochromic, active matrix addressed display (AMAD) is demonstrated. The monolithically integrated AMAD, which contains a 3 × 3 array of organic electrochromic smart pixels (OESPs), is manufactured on a plastic substrate solely using screen printing. Each OESP is based on the combination of one organic electrochromic display (OECD) and one organic electrochemical transistor (OECT), where both devices are screen printed into multilayered vertical architectures. The conduction state of the OECT enables control of the color state of its corresponding OECD, thereby circumventing cross-talk effects in the resulting AMAD device. The manufacturing approach also involves electrical wires, which connect each OECD with its corresponding OECT and also serve as the addressing lines of the resulting AMAD device, that are formed by screen printing of an ink based on either silver or nanocopper.
|
|
| 4. |
- Berggren, Magnus, et al.
(author)
-
Browsing the Real World using Organic Electronics, Si-Chips, and a Human Touch
- 2016
-
In: Advanced Materials. - : Wiley. - 0935-9648 .- 1521-4095. ; 28:10, s. 1911-1916
-
Journal article (peer-reviewed)abstract
- Two different e-labels were developed to explore the feasibility and to identify scientifi c and engineering challenges of the Real-World-Web platform. First was a printed biosensor e-label, comprising Si-chips with an array of different printegrated devices, and second, an e-label to explore the feasibility of transferring data, through the human body, between a mobile device and different distributed e-labels, adhered onto the body or onto dedicated devices and surfaces of one's ambience. The silicon chips utilized in e-labels, include analogue and digital circuitry to receive and handle sensory input, to perform signal processing, and to transmit information to antennas and displays. When used, the e-label is turned on, and a sample is then added onto the sensor area. The display provides simple instructions and updated information to the user. All data handling, electrical probing, and analysis of the sensor is performed by the Si-chips, and the sensing data is finally shown in the printed display. The second e-label exemplifies an ID-tag for body area networks (BAN) communication applications, which, in part, is manufactured and integrated in the same way as the first e-label, but with another choice of Si-chips and capacitive antennas.
|
|
| 5. |
- Abdollahi Sani, Negar, et al.
(author)
-
All-printed diode operating at 1.6 GHz
- 2014
-
In: Proceedings of the National Academy of Sciences of the United States of America. - : National Academy of Sciences. - 0027-8424 .- 1091-6490. ; 111:33, s. 11943-11948
-
Journal article (peer-reviewed)abstract
- Printed electronics are considered for wireless electronic tags and sensors within the future Internet-of-things (IoT) concept. As a consequence of the low charge carrier mobility of present printable organic and inorganic semiconductors, the operational frequency of printed rectifiers is not high enough to enable direct communication and powering between mobile phones and printed e-tags. Here, we report an all-printed diode operating up to 1.6 GHz. The device, based on two stacked layers of Si and NbSi2 particles, is manufactured on a flexible substrate at low temperature and in ambient atmosphere. The high charge carrier mobility of the Si microparticles allows device operation to occur in the charge injection-limited regime. The asymmetry of the oxide layers in the resulting device stack leads to rectification of tunneling current. Printed diodes were combined with antennas and electrochromic displays to form an all-printed e-tag. The harvested signal from a Global System for Mobile Communications mobile phone was used to update the display. Our findings demonstrate a new communication pathway for printed electronics within IoT applications.
|
|
| 6. |
- Andersson Ersman, Peter, et al.
(author)
-
All-printed large-scale integrated circuits based on organic electrochemical transistors
- 2019
-
In: Nature Communications. - : Nature Publishing Group. - 2041-1723. ; 10:1
-
Journal article (peer-reviewed)abstract
- The communication outposts of the emerging Internet of Things are embodied by ordinary items, which desirably include all-printed flexible sensors, actuators, displays and akin organic electronic interface devices in combination with silicon-based digital signal processing and communication technologies. However, hybrid integration of smart electronic labels is partly hampered due to a lack of technology that (de)multiplex signals between silicon chips and printed electronic devices. Here, we report all-printed 4-to-7 decoders and seven-bit shift registers, including over 100 organic electrochemical transistors each, thus minimizing the number of terminals required to drive monolithically integrated all-printed electrochromic displays. These relatively advanced circuits are enabled by a reduction of the transistor footprint, an effort which includes several further developments of materials and screen printing processes. Our findings demonstrate that digital circuits based on organic electrochemical transistors (OECTs) provide a unique bridge between all-printed organic electronics (OEs) and low-cost silicon chip technology for Internet of Things applications. © 2019, The Author(s).
|
|
| 7. |
- Andersson Ersman, Peter, et al.
(author)
-
Batteryless Electronic System Printed on Glass Substrate
- 2021
-
In: Electronic Materials. - : MDPI AG. - 2673-3978. ; 2:4
-
Journal article (peer-reviewed)abstract
- Batteryless hybrid printed electronic systems manufactured on glass substrates are reported. The electronic system contains a sensor capable of detecting water, an electrochromic display, conductors, a silicon chip providing the power supply through energy harvesting of electromagnetic radiation, and a silicon-based microcontroller responsible for monitoring the sensor status and the subsequent update of the corresponding display segment. The silicon-based components were assembled on the glass substrate by using a pick and place equipment, while the remainder of the system was manufactured by screen printing. Many printed electronic components, often relying on organic materials, are sensitive to variations in environmental conditions, and the reported system paves the way for the creation of electronic sensor platforms on glass substrates for utilization in see-through applications in harsh conditions. Additionally, this generic hybrid printed electronic sensor system also demonstrates the ability to enable autonomous operation through energy harvesting in future smart window applications.
|
|
| 8. |
|
|
| 9. |
- Andersson Ersman, Peter, et al.
(author)
-
Electrochromic Displays Screen Printed on Transparent Nanocellulose-Based Substrates
- 2023
-
In: Advanced Photonics Research. - : John Wiley & Sons, Ltd. - 2699-9293.
-
Journal article (peer-reviewed)abstract
- Manufacturing of electronic devices via printing techniques is often considered to be an environmentally friendly approach, partially due to the efficient utilization of materials. Traditionally, printed electronic components (e.g., sensors, transistors, and displays) are relying on flexible substrates based on plastic materials; this is especially true in electronic display applications where, most of the times, a transparent carrier is required in order to enable presentation of the display content. However, plastic-based substrates are often ruled out in end user scenarios striving toward sustainability. Paper substrates based on ordinary cellulose fibers can potentially replace plastic substrates, but the opaqueness limits the range of applications where they can be used. Herein, electrochromic displays that are manufactured, via screen printing, directly on state-of-the-art fully transparent substrates based on nanocellulose are presented. Several different nanocellulose-based substrates, based on either nanofibrillated or nanocrystalline cellulose, are manufactured and evaluated as substrates for the manufacturing of electrochromic displays, and the optical and electrical switching performances of the resulting display devices are reported and compared. The reported devices do not require the use of metals and/or transparent conductive oxides, thereby providing a sustainable all-printed electrochromic display technology.
|
|
| 10. |
|
|
