| 1. |
- Parveen, Nazish, et al.
(author)
-
Facile Synthesis of SnS2 Nanostructures with Different Morphologies for High-Performance Supercapacitor Applications
- 2018
-
In: ACS Omega. - : AMER CHEMICAL SOC. - 2470-1343. ; 3:2, s. 1581-1588
-
Journal article (peer-reviewed)abstract
- SnS2 is an emerging candidate for an electrode material because of the considerable interlayer spaces in its crystal structures and the large surface area. SnS2 as a photocatalyst and in lithium ion batteries has been reported. On the other hand, there are only a few reports of their supercapacitor applications. In this study, sheetlike SnS2 (SL-SnS2), flowerlike SnS2 (FL-SnS2), and ellipsoid-like SnS2 (EL-SnS2) were fabricated via a facile solvothermal route using different types of solvents. The results suggested that the FL-SnS2 exhibited better capacitive performance than the SL-SnS2 and EL-SnS2, which means that the morphology has a significant effect on the electrochemical reaction. The FL-SnS2 displayed higher supercapacitor performance with a high capacity of approximately similar to 431.82 F/g at a current density of 1 A/g. The remarkable electrochemical performance of the FL-SnS2 could be attributed to the large specific surface area and better average pore size. These results suggest that a suitable solvent is appropriate for the large-scale construction of SnS2 with different morphologies and also has huge potential in the practical applications of high-performance supercapacitors.
|
|
| 2. |
- Hussain, Humair, et al.
(author)
-
Freestanding Activated Carbon Nanocomposite Electrodes for Capacitive Deionization of Water
- 2022
-
In: Polymers. - : MDPI AG. - 2073-4360. ; 14:14
-
Journal article (peer-reviewed)abstract
- Freshwater reserves are being polluted every day due to the industrial revolution. Man-made activities have adverse effects upon the ecosystem. It is thus the hour of need to explore newer technologies to save and purify water for the growing human population. Capacitive deionization (CDI) is being considered as an emerging technique for removal of excess ions to produce potable water including desalination. Herein, cost-effective activated carbon incorporated with carbon nanotubes (CNT) was used as a freestanding electrode. Further, the desalination efficiency of the designed electrodes was tuned by varying binder concentration, i.e., polyvinylidene difluoride (PVDF) in the activated carbon powder and CNT mixture. PVDF concentration of 5, 7.5, 10, and 12.5 wt% was selected to optimize the freestanding electrode formation and further applied for desalination of water. PVDF content affected the surface morphology, specific surface area, and functional groups of the freestanding electrodes. Moreover, the electrical conductivity and specific surface area changed with PVDF concentration, which ultimately affected the desalination capacity using the freestanding electrodes. This study paves the way to produce cost effective carbon-based freestanding electrodes for capacitive deionization and other applications including battery electrodes.
|
|
