| 1. |
- Ashour, Radwa M., et al.
(author)
-
Preparation and characterization of magnetic iron oxide nanoparticles functionalized by L-cysteine : Adsorption and desorption behavior for rare earth metal ions
- 2016
-
In: Journal of Environmental Chemical Engineering. - : Elsevier. - 2213-3437. ; 4:3, s. 3114-3121
-
Journal article (peer-reviewed)abstract
- In this work, magnetic iron oxide nanoparticles functionalized with L-cysteine (Cys-Fe3O4 NPs) was synthesized and fully characterized by transmission electron microscopy (TEM), X-ray powder diffraction (XRD), Fourier transform infra-red (FTIR), thermogravimetric analysis (TGA) and zeta potential measurements. The synthesized Cys-Fe(3)O(4)NPs has been evaluated as a highly adsorbent for the adsorption of a mixture of four rare earths RE3+ ions (La3+, Nd3+, Gd3+ and Y3+) from digested monazite solutions. The influence of various factors on the adsorption efficiency such as, the contact time, sample pH, temperature, and concentration of the stripping solution were investigated. The results indicate that Cys-Fe3O4 NPs achieve high removal efficiency 96.7, 99.3, 96.5 and 87% for La3+, Nd3+, Gd3+ and Y3+ ions, respectively, at pH = 6 within 15 min, and the adsorbent affinity for metal ions was found to be in order of Nd3+ > La3+ > Gd3+ > Y3+ ions. Using the Langmuir model, a maximum adsorption capacity of La3+, Nd3+, Gd3+ and Y3+ at room temperature was found to be 71.5, 145.5, 64.5 and 13.6 mg g (1), respectively. The Langmuir isotherm and pseudo-second order model fitted much better than the other isotherms and kinetic models. The obtained results for the thermodynamic parameters confirmed the spontaneous and endothermic nature of the process. Moreover, the desorption was carried out with 0.1 M nitric acid solutions. In addition, Cys-Fe3O4 NPs can be used as a highly efficient adsorbent for the adsorption of La3+, Nd3+, Gd3+ and Y3+ ions from digested monazite solutions.
|
|
| 2. |
- Ashour, Radwa M., et al.
(author)
-
Rare Earth Ions Adsorption onto Graphene Oxide Nanosheets
- 2017
-
In: Solvent extraction and ion exchange. - : Informa UK Limited. - 0736-6299 .- 1532-2262. ; 35:2, s. 91-103
-
Journal article (peer-reviewed)abstract
- Graphene oxide (GO) was synthesized and used as a coagulant of rare earth elements (REEs) from aqueous solution. Stability and adsorption capacities were exhibited for target REEs such as La(III), Nd(III), Gd(III), and Y(III). The parameters influencing the adsorption capacity of the target species including contact time, pH, initial concentration, and temperature were optimized. The adsorption kinetics and thermodynamics were studied. The method showed quantitative recovery (99%) upon desorption using HNO3 acid (0.1 M) after a short contact time (15 min).
|
|
| 3. |
- Ashour, Radwa M., et al.
(author)
-
Selective separation of rare earth ions from aqueous solution using functionalized magnetite nanoparticles : kinetic and thermodynamic studies
- 2017
-
In: Chemical Engineering Journal. - : Elsevier. - 1385-8947 .- 1873-3212. ; 327, s. 286-296
-
Journal article (peer-reviewed)abstract
- Separation of rare earth ions (RE3+) from aqueous solution is a tricky problem due to their physico-chemical similarities of properties. In this study, we investigate the influence of the functionalized ligands on the adsorption efficiency and selective adsorption of La3+, Nd3+, Gd3+ and Y3+ from aqueous solution using Magnetite (Fe3O4) nanoparticles (NPs) functionalized with citric acid (CA@Fe3O4 NPs) or L-cysteine (Cys@Fe3O4 NPs). The microstructure, thermal behavior and surface functionalization of the synthesized nanoparticles were studied. The general adsorption capacity of Cys@Fe3O4 NPs was found to be high (98 mg g−1) in comparison to CA@Fe3O4 NPs (52 mg g−1) at neutral pH 7.0. The adsorption kinetic studies revealed that the adsorption of RE3+ ions follows a pseudo second-order model and the adsorption equilibrium data fits well to the Langmuir isotherm. Thermodynamic studies imply that the adsorption process was endothermic and spontaneous in nature. Controlled desorption within 30 min of the adsorbed RE3+ ions from both Cys@Fe3O4 NPs and CA@Fe3O4 NPs was achieved with 0.5 M HNO3. Furthermore, Cys@Fe3O4 NPs exhibited a higher separation factor (SF) in the separation of Gd3+/La3+, Gd3+/Nd3+, Gd3+/Y3+ ions compared to CA@Fe3O4 NPs.
|
|
| 4. |
- Abdel-Khalek, Ahmed A., et al.
(author)
-
Chemical Studies on Uranium Extraction from Concentrated Phosphoric Acid by Using PC88A and DBBP Mixture.
- 2011
-
In: Journal of Radioanalytical and Nuclear Chemistry. - : Springer. - 0236-5731 .- 1588-2780. ; 290, s. 353-359
-
Journal article (peer-reviewed)abstract
- Liquid–liquid extraction of U (VI) from concentrated phosphoric acid by using (2-ethyl hexyl) phosphonic acid, mono (2-ethyl hexyl) ester (PC88A) and di-butyl butyl phosphonate (DBBP) has been investigated. The effect of different factors affecting the extraction process (PC88A concentration, DBBP concentration, shaking time, aqueous/organic phase ratio, phosphoric acid concentration and effect of diluents) have been investigated. The obtained data of temperature on the extraction showed that the enthalpy change is −17.15 kJ mol−1. Uranium was extracted from the strip liquor by using di (2-ethylhexyl) phosphoric acid and tri-octyl phosphine oxide mixture and finally converted to a high purity UO3 product using precipitation with hydrogen peroxide and heat treatment at 365 °C.
|
|
| 5. |
- Abdel-Magied, Ahmed Fawzy, et al.
(author)
-
Hierarchical porous zeolitic imidazolate framework nanoparticles for efficient adsorption of rare-earth elements
- 2019
-
In: Microporous and Mesoporous Materials. - : Elsevier. - 1387-1811 .- 1873-3093. ; 278, s. 175-184
-
Journal article (peer-reviewed)abstract
- Hierarchical porous zeolitic imidazolate frameworks nanoparticles (ZIF-8 NPs) were synthesized at room temperature via a template-free approach under dynamic conditions (stirring) using water as a solvent. The ZIF-8 NPs were evaluated as adsorbents for rare earth elements (La3+, Sm3+ and Dy3+). Adsorption equilibrium was reached after 7h and high adsorption capacities were obtained for dysprosium and samarium (430.4 and 281.1 mg g(-1), respectively) and moderate adsorption capacity for lanthanum (28.8 mg g(-1)) at a pH of 7.0. The high adsorption capacitiese, as well as the high stability of ZIF-8 NPs, make the hierarchical ZIF-8 materials as an efficient adsorbent for the recovery of La3+, Sm3+ and Dy3+ from aqueous solution.
|
|
| 6. |
- Abdel-Magied, Ahmed F., et al.
(author)
-
Synthesis and characterization of chiral phosphirane derivatives of [(μ-H)4Ru4(CO)12] and their application in the hydrogenation of an α,β-unsaturated carboxylic acid
- 2017
-
In: Journal of Organometallic Chemistry. - : Elsevier BV. - 0022-328X. ; 849-850, s. 71-79
-
Journal article (peer-reviewed)abstract
- Ruthenium clusters containing the chiral binaphthyl-derived mono-phosphiranes [(S)-([1,1'-binaphthalen]-2-yl)phosphirane] (S)-1a, [(R)-(2'-methoxy-1,1'-binaphthyl-2-yl)phosphirane] (R)-1b, and the diphosphirane [2,2'-di(phosphiran-1-yl)-1,1'-binaphthalene] (S)-1c have been synthesized and characterized. The clusters are [(μ-H)4Ru4(CO)11((S)-1a)] (S)-2, [(μ-H)4Ru4(CO)11((R)-1b)] (R)-3, 1,1-[(μ-H)4Ru4(CO)10((S)-1c)] (S)-4, [(μ-H)4Ru4(CO)11((S)-binaphthyl-P(s)(H)Et)] (S,S p)-5, [(μ-H)4Ru4(CO)11((S)-binaphthyl-P(R)(H)Et)] (S,R p)-6, [(μ-H)4Ru4(CO)11((R)-binaphthyl-P(s)(H)Et)] (R,S p)-7, [(μ-H)4Ru4(CO)11((R)-binaphthyl-P(R)(H)Et)] (R,R p)-8 and the phosphinidene-capped triruthenium cluster [(μ-H)2Ru3(CO)9(PEt)] 9. Clusters 5-8 are formed via hydrogenation and opening of the phosphirane ring in clusters (S)-2 and (R)-3. The phosphirane-substituted clusters were found to be able to catalyze the hydrogenation of trans-2-methyl-2-butenoic acid (tiglic acid), but no enantioselectivity could be detected. The molecular structures of (S)-4, (R,S p)-7 and 9 have been determined and are presented.
|
|
| 7. |
- Ashour, Radwa M., et al.
(author)
-
Green Synthesis of Metal-Organic Framework Bacterial Cellulose Nanocomposites for Separation Applications
- 2020
-
In: Polymers. - : MDPI AG. - 2073-4360. ; 12:5
-
Journal article (peer-reviewed)abstract
- Metal organic frameworks (MOFs) are porous crystalline materials that can be designed to act as selective adsorbents. Due to their high porosity they can possess very high adsorption capacities. However, overcoming the brittleness of these crystalline materials is a challenge for many industrial applications. In order to make use of MOFs for large-scale liquid phase separation processes they can be immobilized on solid supports. For this purpose, nanocellulose can be considered as a promising supporting material due to its high flexibility and biocompatibility. In this study a novel flexible nanocellulose MOF composite material was synthesised in aqueous media by a novel and straightforward in situ one-pot green method. The material consisted of MOF particles of the type MIL-100(Fe) (from Material Institute de Lavoisier, containing Fe(III) 1,3,5-benzenetricarboxylate) immobilized onto bacterial cellulose (BC) nanofibers. The novel nanocomposite material was applied to efficiently separate arsenic and Rhodamine B from aqueous solution, achieving adsorption capacities of 4.81, and 2.77 mg g‒1, respectively. The adsorption process could be well modelled by the nonlinear pseudo-second-order fitting.
|
|
| 8. |
- El-Sayed, R., et al.
(author)
-
Importance of the surface chemistry of nanoparticles on peroxidase-like activity
- 2017
-
In: Biochemical and Biophysical Research Communications - BBRC. - : Elsevier. - 0006-291X .- 1090-2104. ; 491:1, s. 15-18
-
Journal article (peer-reviewed)abstract
- We report the studies on origin of peroxidase-like activity for gold nanoparticles, as well as the impact from morphology and surface charge of nanoparticles. For this purpose, we have synthesized hollow gold nanospheres (HAuNS) and gold nanorods (AuNR) with different morphology and surface chemistry to investigate their influence on the catalytic activity. We found that citrate-capped HAuNS show catalyzing efficiency in oxidation reaction of 3,3′,5,5′-tetramethylbenzidine (TMB) by hydrogen peroxide (H2O2) and it is superior to that of cetyltrimethylammonium bromide (CTAB)-capped AuNR. The kinetics of catalytic activities from HAuNS and AuNR were respectively studied under varied temperatures. The results indicated that surface chemistry rather than morphology of nanoparticles plays an important role in the catalytic reaction of substrate. Furthermore, influencing factors such as pH, amount of nanoparticle and H2O2 concentration were also investigated on HAuNS-catalyzed system. The great impact of nanoparticle surface properties on catalytic reactions makes a paradigm in constructing nanozymes as peroxidase mimic for sensing application.
|
|
| 9. |
- F. Abdel-Magied, Ahmed, et al.
(author)
-
Magnetic metal-organic frameworks for efficient removal of cadmium(II), and lead(II) from aqueous solution
- 2022
-
In: Journal of Environmental Chemical Engineering. - : Elsevier BV. - 2213-2929 .- 2213-3437. ; 10:3
-
Journal article (peer-reviewed)abstract
- Efficient and convenient methods for the removal of toxic heavy metal ions especially Cd(II) and Pb(II) from aqueous solutions is of great importance due to their serious threat to public health and the ecological system. In this study, two magnetic metal-organic frameworks (namely: Fe3O4@ZIF-8, and Fe3O4@UiO-66–NH2) were synthesized, fully characterized, and applied for the adsorption of Cd(II) and Pb(II) from aqueous solutions. The adsorption efficiencies for the prepared nanocomposites are strongly dependent on the pH of the aqueous solution. The maximum adsorption capacities of Fe3O4@UiO-66–NH2, and Fe3O4@ZIF-8 at pH 6.0 were calculated to be 714.3 mg·g−, and 370 mg·g−1 for Cd(II), respectively, and 833.3 mg·g−1, and 666.7 mg·g−1 for Pb(II), respectively. The adsorption process follows a pseudo-second-order model and fit the Langmuir isotherm model. Moreover, the thermodynamic studies revealed that the adsorption process is endothermic, and spontaneous in nature. A plausible adsorption mechanism was discussed in detail. The magnetic adsorbents: Fe3O4@ZIF-8, and Fe3O4@UiO-66–NH2 showed excellent reusability, maintaining the same efficiency for at least four consecutive cycles. These results reveal the potential use of magnetic Fe3O4@ZIF-8, and Fe3O4@UiO-66–NH2 as efficient adsorbents in removing Cd(II) and Pb(II) from aqueous solutions.
|
|
