SwePub
Sök i SwePub databas

  Extended search

Träfflista för sökning "WFRF:(Bao Mingquan 1962) "

Search: WFRF:(Bao Mingquan 1962)

  • Result 1-2 of 2
Sort/group result
   
EnumerationReferenceCoverFind
1.
  • Cimbili, Bharath, et al. (author)
  • Investigating Feeding Techniques for High-power and High-efficiency E-band Power Amplifiers
  • 2024
  • In: 2024 IEEE TOPICAL CONFERENCE ON RF/MICROWAVE POWER AMPLIFIERS FOR RADIO AND WIRELESS APPLICATIONS, PAWR. - 2164-8751. - 9798350314649 ; , s. 59-61
  • Conference paper (peer-reviewed)abstract
    • In this article, the feeding techniques for highpower and high-efficiency E-band (60 - 90 GHz) power amplifiers (PAs) that employ high-electron-mobility transistors (HEMTs) with a gate periphery of 8x45 mu m are investigated. To enhance the performance of the HEMTs with extended periphery, a symmetrical gate feeder and a low-impedance drain feeder line are proposed for the input and output matching networks, respectively. A wideband three stage PA is demonstrated with an 8x45 mu m HEMT at the final stage, utilizing IAF GaN 100nm technology. The measured PA delivers an output power of 28.7dBm associated with a power-added-efficiency (PAE) of 25.4% at 76 GHz while maintaining a PAE above 20% from 70 to 80 GHz. Moreover, the PA exhibits a small-signal gain of more than 19.5 dB within the 49-79GHz range, featuring a 3-dB bandwidth of 30 GHz. To the best of the authors' knowledge, this is the first PA to demonstrate PAE exceeding 20% and covering the majority (70 - 80 GHz) of the Satcom E-band.
  •  
2.
  • Strömbeck, Frida, 1990, et al. (author)
  • Transmitter and Receiver Circuits for a High-Speed Polymer Fiber-Based PAM-4 Communication Link
  • 2022
  • In: Sensors. - : MDPI AG. - 1424-8220. ; 22:17
  • Journal article (peer-reviewed)abstract
    • A high data rate RF-DAC and a power detector (PD) are designed and fabricated in a 250 nm indium phosphide (InP) double heterojunction bipolar transistor (DHBT) technology. A communication link using the Tx-Rx over polymer microwave fiber (PMF) is measured. The link consists of a pulse amplitude modulation (PAM) modulator and a PD as a demodulator, as well as a one-meter-long dielectric waveguide. The working frequency range of the complete link is verified to be 110–150 GHz. The peak output power of the PAM modulator is 5 dBm, and it has a −3 dB bandwidth of 43 GHz. The PD consists of a parallel connected common emitter configured transistor and a common base configured transistor to suppress the odd-order harmonics at the PD’s output, as well as a stacked transistor to amplify the output signal. Tx and Rx chips, including pads, occupy a total area of only 0.83 mm2. The PMF link can support a PAM-4 signal with 22 Gbps data transmission, and a PAM-2 signal with 30 Gbps data transmission, with a bit error rate (BER) of <10−12, with demodulation performed in real time. Furthermore, the energy efficiency for the link (Tx + Rx) is 4.1 pJ/bit, using digital data input and receiving PAM-2 output (5.6 pJ/bit for PAM-4).
  •  
Skapa referenser, mejla, bekava och länka
  • Result 1-2 of 2

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Close

Copy and save the link in order to return to this view