1. |
- Amin, Sidra, et al.
(author)
-
A practical non-enzymatic urea sensor based on NiCo 2 O 4 nanoneedles
- 2019
-
In: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 9:25, s. 14443-14451
-
Journal article (peer-reviewed)abstract
- We propose a new facile electrochemical sensing platform for determination of urea, based on a glassy carbon electrode (GCE) modified with nickel cobalt oxide (NiCo 2 O 4 ) nanoneedles. These nanoneedles are used for the first time for highly sensitive determination of urea with the lowest detection limit (1 μM) ever reported for the non-enzymatic approach. The nanoneedles were grown through a simple and low-temperature aqueous chemical method. We characterized the structural and morphological properties of the NiCo 2 O 4 nanoneedles by TEM, SEM, XPS and XRD. The bimetallic nickel cobalt oxide exhibits nanoneedle morphology, which results from the self-assembly of nanoparticles. The NiCo 2 O 4 nanoneedles are exclusively composed of Ni, Co, and O and exhibit a cubic crystalline phase. Cyclic voltammetry was used to study the enhanced electrochemical properties of a NiCo 2 O 4 nanoneedle-modified GCE by overcoming the typical poor conductivity of bare NiO and Co 3 O 4 . The GCE-modified electrode is highly sensitive towards urea, with a linear response (R 2 = 0.99) over the concentration range 0.01-5 mM and with a detection limit of 1.0 μM. The proposed non-enzymatic urea sensor is highly selective even in the presence of common interferents such as glucose, uric acid, and ascorbic acid. This new urea sensor has good viability for urea analysis in urine samples and can represent a significant advancement in the field, owing to the simple and cost-effective fabrication of electrodes, which can be used as a promising analytical tool for urea estimation.
|
|
2. |
- Amin, Sidra, et al.
(author)
-
A practical non-enzymatic urea sensor based on NiCo2O4 nanoneedles
- 2019
-
In: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 9:25, s. 14443-14451
-
Journal article (peer-reviewed)abstract
- We propose a new facile electrochemical sensing platform for determination of urea, based on a glassy carbon electrode (GCE) modified with nickel cobalt oxide (NiCo2O4) nanoneedles. These nanoneedles are used for the first time for highly sensitive determination of urea with the lowest detection limit (1 mu M) ever reported for the non-enzymatic approach. The nanoneedles were grown through a simple and low-temperature aqueous chemical method. We characterized the structural and morphological properties of the NiCo2O4 nanoneedles by TEM, SEM, XPS and XRD. The bimetallic nickel cobalt oxide exhibits nanoneedle morphology, which results from the self-assembly of nanoparticles. The NiCo2O4 nanoneedles are exclusively composed of Ni, Co, and O and exhibit a cubic crystalline phase. Cyclic voltammetry was used to study the enhanced electrochemical properties of a NiCo2O4 nanoneedle-modified GCE by overcoming the typical poor conductivity of bare NiO and Co3O4. The GCE-modified electrode is highly sensitive towards urea, with a linear response (R-2 = 0.99) over the concentration range 0.01-5 mM and with a detection limit of 1.0 mu M. The proposed non-enzymatic urea sensor is highly selective even in the presence of common interferents such as glucose, uric acid, and ascorbic acid. This new urea sensor has good viability for urea analysis in urine samples and can represent a significant advancement in the field, owing to the simple and cost-effective fabrication of electrodes, which can be used as a promising analytical tool for urea estimation.
|
|
3. |
- Amin, Sidra, et al.
(author)
-
A practical non-enzymatic urea sensor based on NiCo2O4 nanoneedles
- 2019
-
In: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 9:25, s. 14443-14451
-
Journal article (peer-reviewed)abstract
- We propose a new facile electrochemical sensing platform for determination of urea, based on a glassy carbon electrode (GCE) modified with nickel cobalt oxide (NiCo2O4) nanoneedles. These nanoneedles are used for the first time for highly sensitive determination of urea with the lowest detection limit (1 μM) ever reported for the non-enzymatic approach. The nanoneedles were grown through a simple and low-temperature aqueous chemical method. We characterized the structural and morphological properties of the NiCo2O4 nanoneedles by TEM, SEM, XPS and XRD. The bimetallic nickel cobalt oxide exhibits nanoneedle morphology, which results from the self-assembly of nanoparticles. The NiCo2O4 nanoneedles are exclusively composed of Ni, Co, and O and exhibit a cubic crystalline phase. Cyclic voltammetry was used to study the enhanced electrochemical properties of a NiCo2O4 nanoneedle-modified GCE by overcoming the typical poor conductivity of bare NiO and Co3O4. The GCE-modified electrode is highly sensitive towards urea, with a linear response (R2 = 0.99) over the concentration range 0.01–5 mM and with a detection limit of 1.0 μM. The proposed non-enzymatic urea sensor is highly selective even in the presence of common interferents such as glucose, uric acid, and ascorbic acid. This new urea sensor has good viability for urea analysis in urine samples and can represent a significant advancement in the field, owing to the simple and cost-effective fabrication of electrodes, which can be used as a promising analytical tool for urea estimation.
|
|
4. |
- Andersson Ersman, Peter, et al.
(author)
-
Electrochromic Displays Screen Printed on Transparent Nanocellulose-Based Substrates
- 2023
-
In: Advanced Photonics Research. - : John Wiley & Sons, Ltd. - 2699-9293.
-
Journal article (peer-reviewed)abstract
- Manufacturing of electronic devices via printing techniques is often considered to be an environmentally friendly approach, partially due to the efficient utilization of materials. Traditionally, printed electronic components (e.g., sensors, transistors, and displays) are relying on flexible substrates based on plastic materials; this is especially true in electronic display applications where, most of the times, a transparent carrier is required in order to enable presentation of the display content. However, plastic-based substrates are often ruled out in end user scenarios striving toward sustainability. Paper substrates based on ordinary cellulose fibers can potentially replace plastic substrates, but the opaqueness limits the range of applications where they can be used. Herein, electrochromic displays that are manufactured, via screen printing, directly on state-of-the-art fully transparent substrates based on nanocellulose are presented. Several different nanocellulose-based substrates, based on either nanofibrillated or nanocrystalline cellulose, are manufactured and evaluated as substrates for the manufacturing of electrochromic displays, and the optical and electrical switching performances of the resulting display devices are reported and compared. The reported devices do not require the use of metals and/or transparent conductive oxides, thereby providing a sustainable all-printed electrochromic display technology.
|
|
5. |
- Arrigan, Damien, et al.
(author)
-
Selective voltammetric detection of dopamine in the presence ofascorbate
- 2004
-
In: Chemical Communications. - : Royal Society of Chemistry. - 1359-7345 .- 1364-548X. ; :6, s. 732-733
-
Journal article (peer-reviewed)abstract
- The selective detection of dopamine in the presence of ascorbateis demonstrated based on the voltammetry of dopamine transferacross the interface between two immiscible electrolyte solutions(ITIES) facilitated by an organic-phase ionophore; ascorbatetransfer does not occur, leading to highly selectivedetection of dopamine in the presence of excess ascorbate.
|
|
6. |
|
|
7. |
- Azzouzi, Sawsen, et al.
(author)
-
An integrated dual functional recognition/amplification bio-label for the one-step impedimetric detection of Micro-RNA-21
- 2017
-
In: Biosensors & bioelectronics. - : ELSEVIER ADVANCED TECHNOLOGY. - 0956-5663 .- 1873-4235. ; 92, s. 154-161
-
Journal article (peer-reviewed)abstract
- Alteration in expression of miRNAs has been correlated with different cancer types, tumour stage and response to treatments. In this context, a structurally responsive oligonucleotide-based electrochemical impedimetric biosensor has been developed for the simple and sensitive detection of miRNA-21. A highly specific biotinylated DNA/LNA molecular beacon (MB) probe was conjugated with gold nanoparticles (AuNPs) to create an integrated, dual function bio-label (biotin-MB-AuNPs) for both biorecognition and signal generation. In the presence of target miRNA-21, hybridisation takes place resulting in the "activation" of the biotin-MB; this event makes the biotin group, which was previously "protected" by the steric hindrance of the MB stem-loop structure, accessible. The activated biotin-MB-AuNPs/miRNA complexes become available for capture, via supramolecular interaction, onto a nentravidin-modified electrode for electrochemical transduction. The binding event results in a decrease of the charge transfer resistance at the working electrode/electrolyte interface. The biosensor responded linearly in the range 1-1000 pM of miRNA-21, with a limit of detection of 0.3 pM, good reproducibility (Relative Standard deviation (RSD) =3.3%) and high selectivity over other miRNAs (i.e. miRNA221 and miRNA-205) sequences. Detection of miRNA-21 in spiked serum samples at clinically relevant levels (low pM range) was also demonstrated, thus illustrating the potential of the biosensor for point-of-care clinical applications. The proposed biosensor design, based on the combination of a neutravidin transducing surface and the dual-function biotin-MB-AuNPs bio-label, provides a simple and robust approach for detection of short-length nucleic acid targets, such as miRNAs.
|
|
8. |
- Bagheryan, Z., et al.
(author)
-
Diazonium-based impedimetric aptasensor for the rapid label-free detection of Salmonella typhimurium in food sample
- 2016
-
In: Biosensors & bioelectronics. - : Elsevier Ltd. - 0956-5663 .- 1873-4235. ; 80, s. 566-573
-
Journal article (peer-reviewed)abstract
- Fast and accurate detection of microorganisms is of key importance in clinical analysis and in food and water quality monitoring. Salmonella typhimurium is responsible for about a third of all cases of foodborne diseases and consequently, its fast detection is of great importance for ensuring the safety of foodstuffs.We report the development of a label-free impedimetric aptamer-based biosensor for S. typhimurium detection. The aptamer biosensor was fabricated by grafting a diazonium-supporting layer onto screen-printed carbon electrodes (SPEs), via electrochemical or chemical approaches, followed by chemical immobilisation of aminated-aptamer. FTIR-ATR, contact angle and electrochemical measurements were used to monitor the fabrication process. Results showed that electrochemical immobilisation of the diazonium-grafting layer allowed the formation of a denser aptamer layer, which resulted in higher sensitivity. The developed aptamer-biosensor responded linearly, on a logarithm scale, over the concentration range 1×101 to 1×108 CFU mL-1, with a limit of quantification (LOQ) of 1×101 CFU mL-1 and a limit of detection (LOD) of 6 CFU mL-1. Selectivity studies showed that the aptamer biosensor could discriminate S. typhimurium from 6 other model bacteria strains. Finally, recovery studies demonstrated its suitability for the detection of S. typhimurium in spiked (1×102, 1×104 and 1×106 CFU mL-1) apple juice samples.
|
|
9. |
|
|
10. |
- Beni, Valerio
(author)
-
Biosensors for Food and the Environment: Is it all in the DNA?
- 2013
-
Conference paper (other academic/artistic)abstract
- Biosensor technology not only holds great promise for the healthcare market but it is also expected to have significant impacts in other areas such as environmental and food analysis. Between the different biosensor formats nucleic acid-based biosensors are gaining increasingly importance allowing the specific identification of DNA/RNA fragments and, more recently, the detection of biological or chemical species. Direct identification of DNA/RNA fragments, via hybridisation assays (genosensors), has been shown to be a very powerful tool for the detection of pathogens in environment and food, in food contamination analysis and food allergens monitoring. Recently the discovery of aptamers, synthetic receptors based on short functional DNA/RNA chains, has opened new opportunities for oligonucleotide based biosensors and more specifically in the detection of biological and/or chemical species, such as proteins and pollutants. In this paper an overview of the most recent advances in the development and applications of nucleic acid-based biosensors for environmental and food safety/quality application will be presented with special emphasis on electrochemical and optical hybridisation genosensors and aptasensors.
|
|