1. |
- Bighiu, Maria Alexandra, 1989-, et al.
(author)
-
Biofouling of leisure boats as a source of metal pollution
- 2017
-
In: Environmental Science and Pollution Research. - : Springer Science and Business Media LLC. - 0944-1344 .- 1614-7499. ; 24:1, s. 997-1006
-
Journal article (peer-reviewed)abstract
- The release of harmful metals from antifouling paints to water bodies is a well-known problem. In this study, we measured both the amount of biofouling growth on leisure boats during one season as well as the concentration of metals accumulated by the biofouling matrix. Furthermore, the efficiency of antifouling paints and mechanical boat cleaning as well as the effect of hull colour on biofouling were evaluated. Unlike paint residues, biofouling waste has never been regarded as a source of metal contamination and has previously been neglected in the scientific literature. Our results revealed that the biofouling waste contained very high concentrations of metals, up to 28,000 mg copper/kg dw and 171,000 mg zinc/kg dw, which exceeds the guidance values for least sensitive land use in Sweden by factors of 140 and 340, respectively. This observation is important because the contaminated biofouling waste is commonly disposed of in boatyard soils at the end of each season, thus increasing the levels of metal pollution. Moreover, there was no significant difference in the amount of biofouling if the boats were coated with copper or zinc containing paints or no paint at all, indicating that biocide paints might not be necessary in low-salinity areas such as the Stockholm archipelago. For boats that were not painted at all during the season, those washed on boat washers (mechanically) had on average half of the amount of biofouling compared to boats that were not cleaned mechanically. The results of the study indicate the importance of proper management of biofouling waste as well as the use of more environmentally friendly removal methods for biofouling such as boat washers.
|
|
2. |
- Bighiu, Maria Alexandra, et al.
(author)
-
Metal contamination in harbours impacts life-history traits and metallothionein levels in snails
- 2017
-
In: Plos One. - : Public Library of Science (PLoS). - 1932-6203. ; 12:7
-
Journal article (peer-reviewed)abstract
- Harbours with limited water exchange are hotspots of contaminant accumulation. Antifouling paints (AF) contribute to this accumulation by leaching biocides that may affect non-target species. In several leisure boat harbours and reference areas in the Baltic Sea, chronic exposure effects were evaluated using caging experiments with the snail Theodoxus fluviatilis. We analysed variations in ecologically relevant endpoints (mortality, growth and reproduction) in concert with variation in metallothionein-like proteins (MTLP) levels. The latter is a biomarker of exposure to metals, such as copper (Cu) and zinc (Zn), which are used in AF paints as active ingredient and stabilizer, respectively. In addition, environmental samples (water, sediment) were analysed for metal (Cu and Zn) and nutrient (total phosphorous and nitrogen) concentrations. All life-history endpoints were negatively affected by the exposure, with higher mortality, reduced growth and lower fecundity in the harbours compared to the reference sites. Metal concentrations were the key explanatory variables for all observed adverse effects, suggesting that metal-driven toxicity, which is likely to stem from AF paints, is a source of anthropogenic stress for biota in the harbours.
|
|
3. |
- Bighiu, Maria Alexandra, et al.
(author)
-
Mortality and histopathological effects in harbour-transplanted snails with different exposure histories
- 2017
-
In: Aquatic Toxicology. - : Elsevier BV. - 0166-445X .- 1879-1514. ; 190, s. 11-20
-
Journal article (peer-reviewed)abstract
- Contaminants are important stressors in the aquatic environment and may exert selective pressures on organisms. We hypothesized that snails originating from a metal-contaminated habitat (B) would have increased tolerance to harbour contaminants (e.g. metals from antifouling paints), compared to snails originating from a relatively clean habitat (A). We assessed tolerance to metals in terms of survival and histopathological alterations after 2, 4 and 8 weeks of in situ exposure in three Baltic Sea boat harbours and three reference sites. We also hypothesized that any potential tolerance to contaminants would be associated with differences in genetic diversity between the two snail populations (evaluated as mitochondrial cytochrome c oxidase subunit I, COI). The results show that snails from population A survived to a higher extent compared to population B, possibly indicating either a lack of adaptation to metals in snails B or impaired health condition due to contaminant pre-exposure or a higher resilience of snails A. Moreover, the genetic diversity of COI was low within each population and did not differ between populations. In general, 83% of all the types of histopathological alterations (e.g. lysis and necrosis of gonads and digestive gland or granulocytoma and phagocytosis in the storage tissue, among others) had a higher probability of occurrence among harbour-exposed snails compared to reference exposed snails, regardless of snail population origin. The only significant difference in histological effects between the two populations was in the frequency of parasite infestations and shell fouling, both being larger for population A than B. Interestingly, the rate of parasite infestations was higher for males than females from population A, whereas no sexual dichotomy was observed for population B. Our results show that exposure to harbour contaminants causes both lethal and sublethal toxicity to snails, and the association between many of the toxic responses and metals substantiates that antifouling substances contribute to the observed effects, although there is a large proportion of variation in our data that remains unexplained.
|
|
4. |
- Bighiu, Maria Alexandra, 1989-
(author)
-
Use and environmental impact of antifouling paints in the Baltic Sea
- 2017
-
Doctoral thesis (other academic/artistic)abstract
- Biocide-based antifouling (AF) paints are the most common method for preventing biofouling, i.e. the growth of algae, barnacles and other organisms on boat hulls. AF paints for leisure boats are predominantly based on copper (Cu) as the main biocide, with zinc (Zn) present as a pigment and stabilizer. Both metals are released from the paint matrix into the water column, leading to contamination of marinas which typically have only limited water exchange. Thus, the aim of this PhD thesis was to describe the use of AF paints in different regions in Sweden, as well as the associated environmental consequences with regard to contamination of the environment and toxicity to non-target aquatic snails. Using a recently developed X-ray fluorescence application, high levels of Cu were detected on boats moored in freshwaters, despite a more than 20-year-old ban, as well as high levels of tin (Sn) on 10 % of the boats, indicating the presence of (old) tributyltin paints (TBT), which might pose an environmental risk and a health hazard for people performing the paint scraping (paper 1). In addition, very high levels of Cu and Zn were measured in the biofouling material collected from the boat hulls, and this is problematic because the biofouling is commonly disposed of on the soil in boatyards at the end of each season. No difference was found in the amount of biofouling on boats coated with Cu or biocide-free paints, which implies that Cu might be currently overused in areas of low salinity and low barnacle density (paper 2). This work also introduces the use of a new species for ecotoxicological field experiments, the snail Theodoxus fluviatilis. Chronic field experiments (paper 3) revealed 6-fold increases in snail mortality, negative growth and up to 67-fold decreased reproduction in marinas, compared to areas not impacted by boating (‘reference areas’). Moreover, a higher prevalence of snails with histopathological alterations (e.g. necrosis of gills, gonads, midgut gland and parasite infestation, among others) was observed in the marinas, compared to the reference areas (paper 4). Statistical modelling indicated that the majority of the toxic effects were best predicted by the metals, most likely originating from AF paints. The results presented in this thesis depict some important aspects of AF paint use in brackish water and highlight the necessity of implementing a suitable management practice for the heavily contaminated biofouling waste in order to minimize the risk to soils. In addition, the evidence of toxicity to snails in marinas can be used as a basis to increase the public understanding of the impact of recreational boating and encourage people to choose less toxic alternatives to AF paints.
|
|
5. |
- Ytreberg, Erik, 1980, et al.
(author)
-
XRF measurements of tin, copper and zinc in antifouling paints coated on leisure boats
- 2016
-
In: Environmental Pollution. - : Elsevier BV. - 0269-7491 .- 1873-6424. ; 213, s. 594-599
-
Journal article (peer-reviewed)abstract
- Tributyltin (TBT) and other organotin compounds have been restricted for use on leisure boats since 1989 in the EU. Nonetheless, release of TBT is observed from leisure boats during hull maintenance work, such as pressure hosing. In this work, we used a handheld X-ray Fluorescence analyser (XRF) calibrated for antifouling paint matrixes to measure tin, copper and zinc in antifouling paints coated on leisure boats in Sweden. Our results show that over 10% of the leisure boats (n = 686) contain >400 mu g/cm(2) of tin in their antifouling coatings. For comparison, one layer (40 mu m dry film) of a TBT-paint equals approximate to 800 mu g Sn/cm(2). To our knowledge, tin has never been used in other forms than organotin (OT) in antifouling paints. Thus, even though the XRF analysis does not provide any information on the speciation of tin, the high concentrations indicate that these leisure boats still have OT coatings present on their hull. On several leisure boats we performed additional XRF measurements by progressively scraping off the top coatings and analysing each underlying layer. The XRF data show that when tin is detected, it is most likely present in coatings close to the hull with several layers of other coatings on top. Thus, leaching of OT compounds from the hull into the water is presumed to be negligible. The risk for environmental impacts arises during maintenance work such as scraping, blasting and high pressure hosing activities. The data also show that many boat owners apply excessive paint layers when following paint manufacturers recommendations. Moreover, high loads of copper were detected even on boats sailing in freshwater, despite the more than 20 year old ban, which poses an environmental risk that has not been addressed until now.
|
|