1. |
- Boström, Björn, 1975-
(author)
-
Achieving carbon isotope mass balance in northern forest soils, soil respiration and fungi
- 2008
-
Doctoral thesis (other academic/artistic)abstract
- Northern forests contain a large part of the global terrestrial carbon pool and it is unclear whether they will be sinks or sources for atmospheric carbon if the climate warms as predicted. Stable isotope techniques provide unique tools to study the carbon cycle at different scales but the interpretation of the isotope data is impaired by our inability to close the carbon isotope mass balance of ecosystems. This involves the paradox that the soil organic matter becomes increasingly 13C-enriched with increasing soil depth relative to the carbon input, plant litter, at the same time as soil respiration, the major carbon outflow from the soil, and fungi, organisms dependent on plant derived carbon, both are relatively 13C-enriched. I have determined the δ13C of the respired CO2 and the organic matter from different ecosystem components in a Norway spruce forest aiming at finding an explanation to the observed carbon isotope pattern. In the first study the soil surface respiration rate and isotopic composition was found to be governed by aboveground weather conditions the preceding 1-6 days. This suggests there is a fast flux of recent photosynthates to root respiration. In the second study I compared the respired CO2 from decomposition with the δ13C of the root free soil organic matter sampled from the litter layer down to 50 cm depth. Discrimination against 13C during respiration could not explain the 13C enrichment of soil organic matter with depth because the δ13C of the respired CO2 became increasingly 13C-enriched relative to the organic matter with soil depth. However, ~1.5‰ of the 2‰ 13C-gradient could be explained by the 13C depletion of atmospheric CO2 that has proceeded since the beginning of the 18th century due to the burning of fossil fuels and deforestation. The remaining shift was hypothesized to be due to a belowground contribution of 13C-enriched ectomycorrhizal derived carbon. In the third study I compared the δ13C of respired CO2 and sporocarps of ectomycorrhizal and saprotrophic fungi sampled in the spruce forest. The δ13C of respired CO2 and sporocarps were positively correlated and the differences in δ13C between CO2 and sporocarps were small, <±1‰ in nine out of 16 species, although three out of six species of ectomycorrhizal basidiomycetes respired 13C-enriched CO2 (up to 1.6‰), whereas three out of five species of polypores respired 13C-depleted CO2 (up to 1.7‰; P<0.05). Loss of 13C-depleted CO2 may have enriched the biomass of some fungal species in 13C. However, the consistent 13C enrichment of fungal sporocarps and respired CO2 relative to the plant materials implies that other processes must be found to explain the consistent 13C-enrichment of fungal biomass compared to plant materials. In the final study, compound specific stable isotope analyses provided further evidence for the hypothesis that the biomass of ectomycorrhizal fungi are 13C-enriched relative to host biomass because the carbon provided by the host is 13C-enriched Furthermore, ectomycorrhizal fungi showed lower average δ13C values of metabolites than saprotrophs which gives further support for the so-called saprotrophic-mycorrhizal divide. I conclude that a belowground allocation of 13C-enriched carbon to ectomycorrhizal fungi closes the carbon isotope mass balance in boreal and temperate forest soils and explains the 13C-enriched soil respiration.
|
|
2. |
|
|
3. |
- Boström, M., et al.
(author)
-
Understanding ice and water film formation on soil particles by combining density functional theory and Casimir-Lifshitz forces
- 2023
-
In: Physical Review B. - : American Physical Society (APS). - 2469-9950 .- 2469-9969. ; 108:12
-
Journal article (peer-reviewed)abstract
- Thin films of ice and water on soil particles play crucial roles in environmental and technological processes. Understanding the fundamental physical mechanisms underlying their formation is essential for advancing scientific knowledge and engineering practices. Herein, we focus on the role of the Casimir-Lifshitz force, also referred to as dispersion force, in the formation and behavior of thin films of ice and water on soil particles at 273.16 K, arising from quantum fluctuations of the electromagnetic field and depending on the dielectric properties of interacting materials. We employ the first-principles density functional theory (DFT) to compute the dielectric functions for two model materials, CaCO3 and Al2O3, essential constituents in various soils. These dielectric functions are used with the Kramers-Kronig relationship and different extrapolations to calculate the frequency-dependent quantities required for determining forces and free energies. Moreover, we assess the accuracy of the optical data based on the DFT to model dispersion forces effectively, such as those between soil particles. Our findings reveal that moisture can accumulate into almost micron-sized water layers on the surface of calcite (soil) particles, significantly impacting the average dielectric properties of soil particles. This research highlights the relevance of DFT-based data for understanding thin film formation in soil particles and offers valuable insights for environmental and engineering applications.
|
|
4. |
- Boström, Pontus, 1982, et al.
(author)
-
Hypoxia converts human macrophages into triglyceride-loaded foam cells.
- 2006
-
In: Arteriosclerosis, thrombosis, and vascular biology. - 1524-4636. ; 26:8, s. 1871-6
-
Journal article (peer-reviewed)abstract
- OBJECTIVE: Atherosclerotic lesions have regions that are hypoxic. Because the lesion contains macrophages that are loaded with lipid, we investigated whether hypoxia can influence the accumulation of lipids in these cells. METHODS AND RESULTS: Exposure of human macrophages to hypoxia for 24 hours resulted in an increased formation of cytosolic lipid droplets and an increased accumulation of triglycerides. Exposure of the macrophages to oxidized low-density lipoprotein (oxLDL) increased the accumulation of cytosolic lipid droplets because of an increase in cellular cholesterol esters. The accumulation of lipid droplets in oxLDL-treated cells was further increased after hypoxia, caused by an increased level of triglycerides. Expression analyses combined with immunoblot or RT-PCR demonstrated that hypoxia increased the expression of several genes that could promote the accumulation of lipid droplets. Hypoxia increased the mRNA and protein levels of adipocyte differentiation-related protein (ADRP). It is well known that an increased expression of ADRP increases the formation of lipid droplets. Hypoxia decreased the expression of enzymes involved in beta-oxidation (acyl-coenzyme A synthetase and acyl-coenzyme A dehydrogenase) and increased the expression of stearoyl-coenzyme A desaturase, an important enzyme in the fatty acid biosynthesis. Moreover, exposure to hypoxia decreased the rate of beta-oxidation, whereas the accumulation of triglycerides increased. CONCLUSIONS: The results demonstrate that exposure of human macrophages to hypoxia causes an accumulation of triglyceride-containing cytosolic lipid droplets. This indicates that the hypoxia present in atherosclerotic lesions can contribute to the formation of the lipid-loaded macrophages that characterize the lesion and to the accumulation of triglycerides in such lesions.
|
|
5. |
- Boström, Tobias, 1975-
(author)
-
Solution-Chemically Derived Spectrally Selective Solar Absorbers : With System Perspectives on Solar Heating
- 2006
-
Doctoral thesis (other academic/artistic)abstract
- This thesis consists of two parts, one dominating part concerning spectrally selective solar absorbers and one dealing with thermal solar systems. The appended papers I to VIII concern the solar absorber part, papers dealing with the systems part have not been included in the thesis.A new spectrally selective absorber derived from a novel solution-chemistry method has been developed and optimized. The main objective was to investigate the potential of the spectrally selective surface. Some of the questions at issue were; would it be possible to create a suitable absorber composite using this method, how high selectivity could be obtained, could the performance be enhanced by using anti-reflection coatings, which was the optimal layer composition, would the thin films be durable and what was the structure and morphology like on a nano scale? The absorber consists of absorbing thin films of nickel nano-particles embedded in a dielectric matrix of alumina and an overlying anti-reflection film consisting of one of the following materials silica, hybrid-silica, alumina or silica-titania. Solution and sol-gel chemistry were used in the process. The thin films were spin-coated onto an aluminum substrate followed by a heat-treatment that generated the multi layer selective solar absorber. The optical constants for the thin film materials in question were determined. An optimal three layer structure was modeled using the experimentally determined optical constants. The theoretical three layer stack was experimentally confirmed and achieved a solar absorptance of 0.97 and a thermal emittance of 0.05 which definitely are commercially competitive values. The configuration of the three layer stack is: an 80%nickel-20%alumina film at the base, a 40%nickel-60%alumina film in the middle and a silica or hybrid-silica film at the top. The three layer absorber was subjected to high temperature and condensation accelerated ageing tests designed by IEA Task 27. The condensation test did not degrade the absorber whatsoever but the high temperature test did reveal some oxidation of the nickel particles. The oxidation occurs initially and then stops. A formed nickel-oxide layer hinders further oxidation. The level of oxidation is small and the absorber is qualified according to the IEA Task 27 test procedure.
|
|
6. |
|
|
7. |
|
|
8. |
|
|
9. |
- Söderlund, Henrik, 1994, et al.
(author)
-
The Creation of a Multi-User Virtual Training Environment for Operator Training in VR
- 2024
-
In: Advances in Transdisciplinary Engineering. ; 52, s. 173-184
-
Conference paper (peer-reviewed)abstract
- Many industries are today heavily exposed to competition which increases the demand for continuous innovations, faster product changes and continued improvements, this is especially true for the automotive industry. Such demands raise the complexity and set a need for continuous training and development of our operators and assembly personnel to keep up with new designs and product changes. This, in combination with an aging population and a growing shortage of experienced assembly workers, increases the need for efficient training capabilities.Today most of the operator training is supervisor driven and takes place in the live production environment working with real products. This approach might introduce uncertainties and a risk to the production system as less experienced workers, still in training, might jeopardize quality, ramp ups and takt time. With the rise of virtual reality there are growing possibilities to carry out these training sessions in a more secure, non-disruptive, virtual environment without jeopardizing ramp ups, takt time or quality. This paper evaluates the possibility to introduce virtual multi-user operator training as an alternative to traditional supervised “on-site” training for assembly workers. Recreation of different assembly task from an automotive case company was created in virtual reality while introducing multi-user functionality to allow multiple operators and supervisors to observe, instruct and evaluate the performance of the operator in training. The developed demonstrator is used as the discussion basis throughout a focus group interview study with selected participants from an OEM case company and the potential of a multi-user virtual reality application as a complement for traditional operator training in operator training is discussed and future research directions for multi-user virtual reality trainings at OEMs is presented.
|
|