| 1. |
- Bulut, Yusuf, et al.
(author)
-
Diblock copolymer pattern protection by silver cluster reinforcement
- 2023
-
In: Nanoscale. - : Royal Society of Chemistry (RSC). - 2040-3364 .- 2040-3372. ; 15:38, s. 15768-15774
-
Journal article (peer-reviewed)abstract
- Pattern fabrication by self-assembly of diblock copolymers is of significant interest due to the simplicity in fabricating complex structures. In particular, polystyrene-block-poly-4-vinylpyridine (PS-b-P4VP) is a fascinating base material as it forms an ordered micellar structure on silicon surfaces. In this work, silver (Ag) is applied using direct current magnetron sputter deposition and high-power impulse magnetron sputter deposition on an ordered micellar PS-b-P4VP layer. The fabricated hybrid materials are structurally analyzed by field emission scanning electron microscopy, atomic force microscopy, and grazing incidence small angle X-ray scattering. When applying simple aqueous posttreatment, the pattern is stable and reinforced by Ag clusters, making micellar PS-b-P4VP ordered layers ideal candidates for lithography. The pristine micellar pattern of the diblock copolymer PS-b-P4VP degrades upon drying of a water droplet, which can be stabilized and inhibited upon deposition of silver clusters.
|
|
| 2. |
- Harder, Constantin, et al.
(author)
-
Optical Properties of Slot‐Die Coated Hybrid Colloid/Cellulose‐Nanofibril Thin Films
- 2023
-
In: Advanced Optical Materials. - : Wiley. - 2162-7568 .- 2195-1071. ; 11:13
-
Journal article (peer-reviewed)abstract
- Correlating nanostructure and optical properties of thin hybrid films is the crucial ingredient for designing sustainable applications ranging from structural colors in anticounterfeiting to sensors. Here, the tailoring of the refractive index of hybrid cellulose nanofibril/water-dispersed colloidal ink thin films is presented. The authors apply scalable, layer-by-layer slot-die coating for preparing the cellulose nanofibril and hybrid thin films. Making use of the mobility of the polymer chains in the colloids upon annealing, the influence of the different colloid sizes and their glass transition temperature on the refractive index of the hybrid material is shown. The complex refractive indices of the thin films are characterized by spectroscopic ellipsometry and correlated to the different nanostructures of the thin films. The authors find that post-deposition annealing changes the colloidal nanostructure from particulate to agglomerates. Depending on the size of the colloids, imbibition of the colloids into the cellulose nanofibril template is observed. This scalable approach offers new avenues in structural color functional biomaterial hybrid layers.
|
|
| 3. |
- Harder, Constantin, et al.
(author)
-
Poly(sobrerol methacrylate) Colloidal Inks Sprayed onto Cellulose Nanofibril Thin Films for Anticounterfeiting Applications
- 2024
-
In: ACS Applied Nano Materials. - : American Chemical Society (ACS). - 2574-0970. ; 7:9, s. 10840-10851
-
Journal article (peer-reviewed)abstract
- The colloidal layer formation on porous materials is a crucial step for printing and applying functional coatings, which can be used to fabricate anticounterfeiting paper. The deposition of colloidal layers and subsequent thermal treatment allows for modifying the hydrophilicity of the surface of a material. In the present work, wood-based colloidal inks are applied by spray deposition on spray-deposited porous cellulose nanofibrils (CNF) films. The surface modification by thermal annealing of the fabricated colloid-cellulose hybrid thin films is investigated in terms of layering and hydrophobicity. The polymer colloids in the inks are core-shell nanoparticles with different sizes and glass transition temperatures (T-g), thus enabling different and low thermal treatment temperatures. The ratio between the core polymers, poly(sobrerol methacrylate) (PSobMA), and poly(-butyl methacrylate) (PBMA) determines the T-g and hence allows for tailoring of the T-g. The layer formation of the colloidal inks on the porous CNF layer depends on the imbibition properties of the CNF layer which is determined by their morphology. The water adhesion of the CNF layer decreases due to the deposition of the colloids and thermal treatment except for the colloids with a size smaller than the void size of the porous CNF film. In this case, the colloids are imbibed into the CNF layer when T-g of the colloids is reached and the polymer chains transit in a mobile phase. Tailored aggregate and nanoscale-embedded hybrid structures are achieved depending on the colloid properties. The imbibition of these colloids into the porous CNF films is verified with grazing incidence small-angle X-ray scattering. This study shows a route for tuning the nanoscale structure and macroscopic physicochemical properties useful for anticounterfeiting paper.
|
|
| 4. |
- Reck, Kristian A., et al.
(author)
-
Early-stage silver growth during sputter deposition on SiO2 and polystyrene - Comparison of biased DC magnetron sputtering, high-power impulse magnetron sputtering (HiPIMS) and bipolar HiPIMS
- 2024
-
In: Applied Surface Science. - : Elsevier BV. - 0169-4332 .- 1873-5584. ; 666
-
Journal article (peer-reviewed)abstract
- The integration of silver thin films into optoelectronic devices has gained much interest due to their exceptional properties in terms of conductivity and compatibility with flexible substrates. For this type of application, ultrathin layers are desirable, because of their optical transparency. Standard direct current magnetron sputtering (DCMS) is known to lead to undesirable formation of islands at low effective film thicknesses on typical substrates like SiO2 or polystyrene (PS). Therefore, in this study, we explore high-power impulse magnetron sputtering (HiPIMS) with optional further acceleration of metal ions by biasing the substrate or an additional positive pulse (bipolar HiPIMS) for the fabrication of ultra-thin silver layers. The morphology and electrical properties of ultra-thin silver layers with selected effective thicknesses are characterized on SiO2 and PS substrates. The growth evolution of characteristic parameters is further investigated by in-situ grazing-incidence small-angle Xray scattering (GISAXS). The results show that HiPIMS deposition yields films with a higher density of clusters than DCMS leading to a percolation threshold at lower effective film thicknesses. This effect is amplified by further ion acceleration. Thus, we suggest HiPIMS as a promising technique for fabricating ultra-thin, conductive layers on organic and oxide substrates.
|
|
