| 1. |
|
|
| 2. |
- Beal, Jacob, et al.
(author)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
In: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Journal article (peer-reviewed)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 3. |
|
|
| 4. |
-
- 2019
-
Journal article (peer-reviewed)
|
|
| 5. |
- Ablikim, M., et al.
(author)
-
Amplitude analysis of D0 → K -π+π+π-
- 2017
-
In: Physical Review D. - 2470-0010 .- 2470-0029. ; 95:7
-
Journal article (peer-reviewed)abstract
- We present an amplitude analysis of the decay D0 → K -π+π+π- based on a data sample of 2.93 fb−1 acquired by the BESIII detector at the ψ(3770) resonance. With a nearly background free sample of about 16000 events, we investigate the substructure of the decay and determine the relative fractions and the phases among the different intermediate processes. Our amplitude model includes the two-body decays D0 → ¯K*0ρ0, D0 → K−a+1(1260) and D0 → K−1(1270)π+, the three-body decays D0 →¯K*0π+π− and D0 → K−π+ρ0, as well as the four-body nonresonant decay D0 → K−π+π+π−. The dominant intermediate process is D0 → K−a+1(1260), accounting for a fit fraction of 54.6%.
|
|
| 6. |
- Ablikim, M., et al.
(author)
-
Amplitude analysis of the chi(c1) -> eta pi(+)pi(-) decays
- 2017
-
In: Physical Review D. - : AMER PHYSICAL SOC. - 2470-0010 .- 2470-0029. ; 95:3
-
Journal article (peer-reviewed)abstract
- Using 448.0 x 10(6) psi(3686) events collected with the BESIII detector, an amplitude analysis is performed for psi(3686) -> gamma chi(c1), chi(c1) ->eta pi(+)pi(-) decays. The most dominant two- body structure observed is a(0)(980)(+/-) pi(-/+); a(0)(980)(+/-) -> eta pi(+/-.) line shape is modeled using a dispersion relation, and a significant nonzero a(0) (980) coupling to the eta'pi channel is measured. We observe chi(c1) -> a(2)(1700)pi production for the first time, with a significance larger than 17 sigma. The production of mesons with exotic quantum numbers, J(PC) = 1(-+), is investigated, and upper limits for the branching fractions chi(c1) -> pi(1)(1400)(+/-)pi(-/+) , chi(c1) -> pi(1)(1600)(+/-)pi(-/+) and chi(c1) -> pi 1(2015)(+/-)pi(-/+) with subsequent pi(1)(X)(+/-) -> eta pi(+/-) decay, are determined.
|
|
| 7. |
- Ablikim, M., et al.
(author)
-
Amplitude Analysis of the Decays eta ' -> pi(+)pi(-)pi(0) and eta' -> pi(0)pi(0)pi(0)
- 2017
-
In: Physical Review Letters. - 0031-9007 .- 1079-7114. ; 118:1
-
Journal article (peer-reviewed)abstract
- Based on a sample of 1.31 x 10(9) J/Psi events collected with the BESIII detector, an amplitude analysis of the isospin-violating decays eta' -> pi(+)pi(-)pi(0) and eta' -> pi(0)pi(0)pi(0) is performed. A significant P-wave contribution from eta' -> rho(+/-)eta(-/+) is observed for the first time in eta' -> pi(+)pi(-)pi(0). The branching fraction is determined to be B(eta' -> rho(+/-)pi(-/+)) = (7.44 +/- 0.60 +/- 1.26 +/- 1.84) x 10(-4), where the first uncertainty is statistical, the second systematic, and the third model dependent. In addition to the nonresonant S-wave component, there is a significant sigma meson component. The branching fractions of the combined S-wave components are determined to be B(eta' -> pi(+)pi(-)pi(0))(S) = (37.63 +/- 0.77 +/- 2.22 +/- 4.48) x 10(-4) and B(eta' -> pi(0)pi(0)pi(0)) = (35.22 +/- 0.82 +/- 2.54) x 10(-4), respectively. The latter one is consistent with previous BESIII measurements.
|
|
| 8. |
- Ablikim, M., et al.
(author)
-
Amplitude analysis of the KSKS system produced in radiative J /psi decays
- 2018
-
In: Physical Review D. - : AMER PHYSICAL SOC. - 2470-0010 .- 2470-0029. ; 98:7
-
Journal article (peer-reviewed)abstract
- An amplitude analysis of the KSKS system produced in radiative J/psi decays is performed using the (1310.6 +/- 7.0) x 10(6) nip decays collected by the BESIII detector. Two approaches are presented. A mass-dependent analysis is performed by parametrizing the KSKS invariant mass spectrum as a sum of Breit-aligner line shapes. Additionally, a mass-independent analysis is performed to extract a piecewise function that describes the dynamics of the KSKS system while making minimal assumptions about the properties and number of poles in the amplitude. The dominant amplitudes in the mass-dependent analysis include the f(0)(1710), f(0)(2200), and f(2)'(1525). The mass-independent results, which are made available as input for further studies, are consistent with those of the mass-dependent analysis and are useful for a systematic study of hadronic interactions. The branching fraction of radiative J/psi decays to KSKS is measured to be (8.1 +/- 0.4) x 10(-4), where the uncertainty is systematic and the statistical uncertainty is negligible.
|
|
| 9. |
- Ablikim, M., et al.
(author)
-
Amplitude analysis of the pi(0)pi(0) system produced in radiative J/psi decays
- 2015
-
In: Physical Review D. - 1550-7998 .- 1550-2368. ; 92:5
-
Journal article (peer-reviewed)abstract
- An amplitude analysis of the pi(0)pi(0) system produced in radiative J/psi decays is presented. In particular, a piecewise function that describes the dynamics of the pi(0)pi(0) system is determined as a function of M pi(0)pi(0) from an analysis of the (1.311 +/- 0.011) x 10(9) J/psi decays collected by the BESIII detector. The goal of this analysis is to provide a description of the scalar and tensor components of the pi(0)pi(0) system while making minimal assumptions about the properties or number of poles in the amplitude. Such a model-independent description allows one to integrate these results with other related results from complementary reactions in the development of phenomenological models, which can then be used to directly fit experimental data to obtain parameters of interest. The branching fraction of J/psi -> pi(0)pi(0) is determined to be (1.15 +/- 0.05) x 10(-3), where the uncertainty is systematic only and the statistical uncertainty is negligible.
|
|
| 10. |
- Ablikim, M., et al.
(author)
-
An improved limit for Gamma(ee) of X(3872) and Gamma(ee) measurement of psi(3686)
- 2015
-
In: Physics Letters B. - : Elsevier BV. - 0370-2693 .- 1873-2445. ; 749, s. 414-420
-
Journal article (peer-reviewed)abstract
- Using the data sets taken at center-of-mass energies above 4 GeV by the BESIII detector at the BEPCII storage ring, we search for the reaction e(+)e(-) -> gamma(ISR) X(3872) -> gamma(ISR)pi(+)pi(-) J/psi via the Initial State Radiation technique. The production of a resonance with quantum numbers J(PC) = 1(++) such as the X(3872) via single photon e(+)e(-) annihilation is forbidden, but is allowed by a next-to-leading order box diagram. We do not observe a significant signal of X(3872), and therefore give an upper limit for the electronic width times the branching fraction Gamma B-X(3872)(ee)(X(3872) -> pi(+)pi(-) J/psi) < 0.13 eVat the 90% confidence level. This measurement improves upon existing limits by a factor of 46. Using the same final state, we also measure the electronic width of the psi(3686) to be Gamma(psi)(ee)(3686) ee = 2213 +/- 18(stat) +/- 99(sys) eV.
|
|
