| 1. |
- Heap, Michael J., et al.
(författare)
-
Imaging strain localisation in porous andesite using digital volume correlation
- 2020
-
Ingår i: Journal of Volcanology and Geothermal Research. - : Elsevier BV. - 0377-0273. ; 404
-
Tidskriftsartikel (refereegranskat)abstract
- Strain localisation structures, such as shear fractures and compaction bands, are of importance due to their influence on permeability and therefore outgassing, a factor thought to influence eruptive style. In this study, we aim to develop a better understanding of strain localisation in porous volcanic rocks using X-ray tomographic images of samples of porous andesite (porosity = 0.26) acquired before and after deformation in the brittle and ductile regimes. These 3D images have been first analysed to provide 3D images of the porosity structure within the undeformed andesite, which consists of a large, well-connected porosity backbone alongside many smaller pores that are either isolated or connected to the porosity backbone by thin microstructural elements (e.g., microcracks). Following deformation, porosity profiles of the samples show localised dilation (porosity increase) and compaction (porosity reduction) within the samples deformed in the brittle and ductile regimes, respectively. Digital volume correlation (DVC) of the images before and after triaxial deformation was used to quantify the tensor strain fields, and the incremental divergence (volumetric strain) and curl (used as an indicator of shear strain) of the displacement fields were calculated from the DVC. These fields show that strain localisation in the sample deformed in the brittle regime manifested as a ~ 1 mm-wide, dilatational shear fracture oriented at an angle of 40–45° to the maximum principal stress. Pre- and post-deformation permeability measurements show that permeability of the sample deformed in the brittle regime increased from 3.9 × 10−12 to 4.9 × 10−12 m2, which is presumed to be related to the shear fracture. For the sample deformed in the ductile regime, strain localised into ~1 mm-thick, undulating compaction bands orientated sub-perpendicular to the maximum principal stress with little evidence of shear. Taken together, our data suggest that these bands formed during large stress drops seen in the mechanical data, within high-porosity zones within the sample, and within the large, well-connected porosity backbone. Pre- and post-deformation permeability measurements indicate that inelastic compaction decreased the permeability of the sample by a factor of ~3. The data of this study assist in the understanding of strain localisation in porous volcanic rocks, its influence on permeability (and therefore volcanic outgassing), and highlight an important role for DVC in studying strain localisation in volcanic materials.
|
|
| 2. |
- Heap, Michael J., et al.
(författare)
-
The tensile strength of hydrothermally altered volcanic rocks
- 2022
-
Ingår i: Journal of Volcanology and Geothermal Research. - : Elsevier. - 0377-0273 .- 1872-6097. ; 428
-
Tidskriftsartikel (refereegranskat)abstract
- The tensile strength of volcanic rocks is an important parameter for understanding and modelling a wide range of volcanic processes, and in the development of strategies designed to optimise energy production in volcanic geothermal reservoirs. However, despite the near-ubiquity of hydrothermal alteration at volcanic and geothermal systems, values of tensile strength for hydrothermally altered volcanic rocks are sparse. Here, we present an experimental study in which we measured the tensile strength of variably altered volcanic rocks. The alteration of these rocks, quantified as the weight percentage of secondary (alteration) minerals, varied from 6 to 62.8 wt%. Our data show that tensile strength decreases as a function of porosity, in agreement with previous studies, and as a function of alteration. We fit existing theoretical constitutive models to our data so that tensile strength can be estimated for a given porosity, and we provide a transformation of these models such that they are a function of alteration. However, because porosity and alteration influence each other, it is challenging to untangle their individual contributions to the measured reduction in tensile strength. Our new data and previously published data suggest that porosity exerts a first-order role on the tensile strength of volcanic rocks. Based on our data and observations, we also suggest that (1) alteration likely decreases tensile strength if associated with mineral dissolution, weak secondary minerals (such as clays), and an increase in microstructural heterogeneity and (2) alteration likely increases tensile strength if associated with pore- and crack-filling mineral precipitation. Therefore, we conclude that both alteration intensity and alteration type likely influence tensile strength. To highlight the implications of our findings, we provide discrete element method modelling which shows that, following the pressurisation of a dyke, the damage within weak hydrothermally altered host-rock is greater and more widespread than for strong hydrothermally altered host-rock. Because the rocks in volcanic and geothermal settings are likely to be altered, our results suggest that future modelling should consider the tensile strength of hydrothermally altered volcanic rocks.
|
|
