1. |
- Beal, Jacob, et al.
(author)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
In: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Journal article (peer-reviewed)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
2. |
- Telloni, Daniele, et al.
(author)
-
Linking Small-scale Solar Wind Properties with Large-scale Coronal Source Regions through Joint Parker Solar Probe-Metis/Solar Orbiter Observations
- 2022
-
In: Astrophysical Journal. - : IOP Publishing Ltd. - 0004-637X .- 1538-4357. ; 935:2
-
Journal article (peer-reviewed)abstract
- The solar wind measured in situ by Parker Solar Probe in the very inner heliosphere is studied in combination with the remote-sensing observation of the coronal source region provided by the METIS coronagraph aboard Solar Orbiter. The coronal outflows observed near the ecliptic by Metis on 2021 January 17 at 16:30 UT, between 3.5 and 6.3 R (circle dot) above the eastern solar limb, can be associated with the streams sampled by PSP at 0.11 and 0.26 au from the Sun, in two time intervals almost 5 days apart. The two plasma flows come from two distinct source regions, characterized by different magnetic field polarity and intensity at the coronal base. It follows that both the global and local properties of the two streams are different. Specifically, the solar wind emanating from the stronger magnetic field region has a lower bulk flux density, as expected, and is in a state of well-developed Alfvenic turbulence, with low intermittency. This is interpreted in terms of slab turbulence in the context of nearly incompressible magnetohydrodynamics. Conversely, the highly intermittent and poorly developed turbulent behavior of the solar wind from the weaker magnetic field region is presumably due to large magnetic deflections most likely attributed to the presence of switchbacks of interchange reconnection origin.
|
|
3. |
|
|
4. |
- Ahmad, Arslan, et al.
(author)
-
Mechanisms of arsenate removal and membrane fouling in ferric based coprecipitation-low pressure membrane filtration systems
- 2020
-
In: Separation and Purification Technology. - : ELSEVIER. - 1383-5866 .- 1873-3794. ; 241
-
Journal article (peer-reviewed)abstract
- Ferric based coprecipitation-low pressure membrane filtration is a promising arsenic (As) removal method, however, membrane fouling mechanisms are not fully understood. In this study we investigated the effect of feed water composition and membrane pore size on arsenate [As(V)] removal and membrane fouling. We observed that As removal efficiency was independent of the membrane pore size because the size of the Fe(III) particles was larger than the pore size of the membranes, attributed to a high calcium concentration in the feed water. Arsenic coprecipitation with Fe(III) (oxyhydr)oxides rapidly reached equilibrium before membrane filtration, within 1 min. Therefore, As removal efficiency was not improved by increasing residence time before membrane filtration. The removal of As(V) was strongly dependent on feed water composition. A higher Fe(III) dose was required to reduce As(V) to sub-mu g/L levels for feed water containing higher concentration of oxyanions such as phosphate and silicate, and lower concentration of cations such as calcium. Cake-layer formation was observed to be the predominant membrane fouling mechanism.
|
|
5. |
- Brolin, Anna
(author)
-
An investigation of cognitive aspects affecting human performance in manual assembly
- 2016
-
Doctoral thesis (other academic/artistic)abstract
- Modern manufacturing systems seem to be shifting from mass production to mass customisation, which means that systems must be able to manage changes in customer demands and requirements, new technology as well as environmental demands. This in turn leads to an increase in product variants that need to be assembled. To handle this issue, well designed and presented information is vital for assembly workers to perform effective and accurate assembly tasks. In this thesis the main focus has been to find factors that affect human performance in manual assembly. A literature review was made on the subject of manufacturing and usability as well as basic cognitive abilities used to utilise information, such as memory. This investigation identified applicable factors for assessing human cognitive performance within the research field of manufacturing. The thesis further investigates how some of these factors are handled in manual assembly, using case studies as well as observational studies. The results show that how material and information are presented to the assembler needs to be considered in order to have a positive effect on the assembly operation. In addition, a full factorial experimental study was conducted to investigate different ways of presenting material and information at the workstation while using mixed assembly mode with product variants. The material presentation factor involved the use of a material rack compared to using an unstructured kit as well as a structured kit and the information presentation factor involved using a text and number instruction compared to a photograph instruction. The results showed that using a kit is favourable compared to the traditional material rack, especially when using a structured kit combined with photographic instruction. Furthermore, the use of unstructured kits can lead to better productivity and reduced perceived workload, compared to a material rack. Although they are perhaps not as good as using a structured kit, they most likely bring a lower cost, such as man-hour consumption and space requirements. However, the number of components in an unstructured kit needs to be considered in order to keep it on a manageable level. As a conclusion, several scenarios were developed in order to understand how different assembly settings can be used in order to improve human performance at the assembly workstation.
|
|
6. |
- Brolin, Anna, et al.
(author)
-
Cognitive Aspects Affecting Human Performance in Manual Assembly
- 2016
-
In: Advances in Manufacturing Technology XXX. - : IOS Press. - 9781614996675 - 9781614996682 ; , s. 231-236
-
Conference paper (peer-reviewed)abstract
- This paper concerns the handling of information in assembly work environments. Several studies involving both literature reviews, case studies andobservations were conducted to find factors that affect human performance in manual assembly. The main experiment with 36 subjects used a mixed method design with a quantitative study, including time and errors as dependant measures,a qualitative study, including workload ratings, and a questionnaire. The experiment involved the assembly of a pedal car and the components werepresented using structured kits, unstructured kits and material racks. Assembly information was presented as text & component numbers or photographs, and situations with and without component variation were considered. Among theresults it was found that assembly times and workload ratings were lower when using a kit, whereas using a material rack resulted in perceived decreased workflow and increased stress and frustration. Assembly times and workload ratings were lower when using photographs, whereas using text and numbers increased mental workload.
|
|
7. |
- Brolin, Anna, et al.
(author)
-
Experimental study of cognitive aspects affecting human performance in manual assembly
- 2017
-
In: Production & Manufacturing Research. - : Taylor & Francis. - 2169-3277. ; 5:1, s. 141-163
-
Journal article (peer-reviewed)abstract
- This study investigate different ways of presenting material and information at workstations while using mixed assembly mode with product variants. The experimental set up annotated an assembly line involving 36 subjects. The material presentation factor involved the use of a material rack compared to using an unstructured kit as well as a structured kit. The information presentation factor involved using a text and number instruction compared to a photograph instruction, and situations with and without component variation were considered. Results show that assembly times and workload ratings were lower when using a kit, whereas using a material rack resulted in perceived decreased workflow and increased stress and frustration. Moreover, assembly times and workload ratings were lower when using photographs, whereas using text and numbers increased mental workload. The results could be useful when planning work places and production systems in order to obtain a better workflow and an increased human performance.
|
|
8. |
- Brolin, Anna, Dr., et al.
(author)
-
Interaction Effects Affecting Human Performance in Manual Assembly
- 2018
-
In: Advances in Manufacturing Technology XXXII. - Amsterdam, Netherlands : IOS Press. - 9781614999010 - 9781614999027 ; , s. 265-270
-
Conference paper (peer-reviewed)abstract
- This paper presents an experimental study aimed at investigating interaction effects affecting personnel in manual assembly. The main experiment with 36 subjects used a mixed method design which included a quantitative study, including time and errors as dependent measures, and a qualitative study, including workload ratings and a questionnaire. The overall task in the experiment was to assemble components on a pedal car. The main factors involved were assembly information (text & component numbers or photographs), material presentation (using structured kits, unstructured kits and material racks) and component variation (situations with and without component variation). It was found that performance, measured in assembly time, was best when combining photographs with no component variants and when using an unstructured kit.
|
|
9. |
- Brolin, Anna, et al.
(author)
-
Kitting as an information source in manual assembly
- 2012
-
In: Advances in Ergonomics in Manufacturing. - : CRC Press. - 9781439870396 - 9780429107603 - 143987039X ; , s. 346-353
-
Book chapter (peer-reviewed)abstract
- In manual assembly, a strategy to meet the goal of efficient production is the increased use of kitting as a material supply principle. Even though kitting is already implemented in industry, there are still uncertainties regarding the effects of introducing kits, particularly from a human factors perspective.This paper presents initial steps in the development of a method to be used for the evaluation of kitting. This from an information source point of view and for studying effects related to productivity and quality. The methodology is projected to act as a foundation for how to carry out a subsequent comprehensive case study. The purpose of the case study is to explore how kitting affects the cognitive workload compared to the ordinary material rack combined with part numbers used in the current manufacturing industry. This is done by measuring productivity; time spent on assembling a product, and quality; number of assembly errors. One step in the methodology development process, which is described in this paper, was to conduct a pilot study, primarily to test the methodology related to the selection of measurement parameters, as well as for getting experiences from running the methodology with real test subjects.
|
|
10. |
|
|