1. |
- Aamodt, K., et al.
(author)
-
The ALICE experiment at the CERN LHC
- 2008
-
In: Journal of Instrumentation. - 1748-0221. ; 3:S08002
-
Research review (peer-reviewed)abstract
- ALICE (A Large Ion Collider Experiment) is a general-purpose, heavy-ion detector at the CERN LHC which focuses on QCD, the strong-interaction sector of the Standard Model. It is designed to address the physics of strongly interacting matter and the quark-gluon plasma at extreme values of energy density and temperature in nucleus-nucleus collisions. Besides running with Pb ions, the physics programme includes collisions with lighter ions, lower energy running and dedicated proton-nucleus runs. ALICE will also take data with proton beams at the top LHC energy to collect reference data for the heavy-ion programme and to address several QCD topics for which ALICE is complementary to the other LHC detectors. The ALICE detector has been built by a collaboration including currently over 1000 physicists and engineers from 105 Institutes in 30 countries, Its overall dimensions are 16 x 16 x 26 m(3) with a total weight of approximately 10 000 t. The experiment consists of 18 different detector systems each with its own specific technology choice and design constraints, driven both by the physics requirements and the experimental conditions expected at LHC. The most stringent design constraint is to cope with the extreme particle multiplicity anticipated in central Pb-Pb collisions. The different subsystems were optimized to provide high-momentum resolution as well as excellent Particle Identification (PID) over a broad range in momentum, up to the highest multiplicities predicted for LHC. This will allow for comprehensive studies of hadrons, electrons, muons, and photons produced in the collision of heavy nuclei. Most detector systems are scheduled to be installed and ready for data taking by mid-2008 when the LHC is scheduled to start operation, with the exception of parts of the Photon Spectrometer (PHOS), Transition Radiation Detector (TRD) and Electro Magnetic Calorimeter (EMCal). These detectors will be completed for the high-luminosity ion run expected in 2010. This paper describes in detail the detector components as installed for the first data taking in the summer of 2008.
|
|
2. |
- Greiner, J., et al.
(author)
-
Gamma-ray burst investigation via polarimetry and spectroscopy (GRIPS)
- 2009
-
In: Experimental astronomy. - : Springer Science and Business Media LLC. - 0922-6435 .- 1572-9508. ; 23:1, s. 91-120
-
Journal article (peer-reviewed)abstract
- The primary scientific goal of the GRIPS mission is to revolutionize our understanding of the early universe using gamma-ray bursts. We propose a new generation gamma-ray observatory capable of unprecedented spectroscopy over a wide range of gamma-ray energies (200 keV-50 MeV) and of polarimetry (200-1000 keV). The gamma-ray sensitivity to nuclear absorption features enables the measurement of column densities as high as 10(28)cm (-aEuro parts per thousand 2). Secondary goals achievable by this mission include direct measurements of all types of supernova interiors through gamma-rays from radioactive decays, nuclear astrophysics with massive stars and novae, and studies of particle acceleration near compact stars, interstellar shocks, and clusters of galaxies.
|
|
3. |
- Gorokhova, E. I., et al.
(author)
-
Structural, optical, and luminescence properties of ZnO:Ga optical scintillation ceramic
- 2018
-
In: Journal of Optical Technology (A Translation of Opticheskii Zhurnal). - 1070-9762. ; 85:11, s. 729-737
-
Journal article (peer-reviewed)abstract
- This paper discusses the characteristics of ZnO and ZnO:Ga ceramics fabricated by uniaxial hot pressing. The short-wavelength transmission limit of zinc oxide ceramics is in the 370-nm region; the long-wavelength limit is determined by the free-charge-carrier concentration and lies in the interval from 5 to 9 μm. The total transmittance of such ceramics in the visible and near-IR regions is about 70% when the sample is 0.5 mm thick. The luminescence spectrum is represented by a broad emission band with maximum at 580 nm, having a defect nature. The introduction of 0.03–0.1 mass % gallium into the zinc oxide structure inhibits grain growth and increases the free-charge-carrier concentration to 3.44 × 1019 cm−3. As the gallium concentration increases in the range 0.05–0.1 mass % in a ceramic of composition ZnO:Ga, the defect luminescence band is suppressed and a characteristic exciton luminescence is formed with a maximum corresponding to 389 nm and a damping time constant of 1.1 ns.
|
|
4. |
- Omelkov, S. I., et al.
(author)
-
Recent advances in time-resolved luminescence spectroscopy at MAX IV and PETRA III storage rings
- 2022. - 1
-
In: Journal of Physics: Conference Series. - : IOP Publishing. - 1742-6588 .- 1742-6596. ; 2380
-
Conference paper (peer-reviewed)abstract
- Short-wavelength synchrotron radiation excitation has been an indispensable tool in the studies of the properties of wide gap materials using time-resolved low-temperature luminescence spectroscopy. In recent years, several setups for such investigations have been launched at MAX IV Laboratory and Photon Science at DESY. Two permanently stationed time-resolved luminescence setups at FinEstBeAMS and P66 beamlines are in operation at MAX IV 1.5 GeV and Petra III storage rings, respectively. Mobile luminescence setups have been developed for studies at FemtoMAX and P23 beamlines. FinEstBeAMS, P66 and P23 provide time resolution from ?1/4160 to 100 ps. The FemtoMAX photon source based on an in-vacuum undulator getting an electron beam from the 3 GeV linear accelerator provides an exceptional time resolution of ?1/430 ps, limited by time response of the photodetector. The performance of the setups, achieved milestones and research challenges are discussed for four new luminescence stations available for the research community with the main focus on time-resolved techniques.
|
|
5. |
- Assylbayev, R., et al.
(author)
-
Defect-related luminescence of MgO single crystals irradiated with swift 132Xe ions
- 2022
-
In: Optical Materials. - : Elsevier BV. - 0925-3467. ; 127
-
Journal article (peer-reviewed)abstract
- Low-temperature cathodo- and photoluminescence connected with the F and F+ centers (oxygen vacancies in different charge states) and bivacancies have been investigated in MgO single crystals preliminarily irradiated by 230-MeV 132Xe ions with varying fluence (up to 1014 ions/cm2). The cathodoluminesence bands (result of decomposition into Gaussians) related to the F, F+ and P centers have intensified with Xe-irradiation fluence up to Φ = 1013 ions/cm2, while drastic emission attenuation in a whole spectral region occurs at higher fluences. The limitations of the use of luminescence methods for the detection of structural point defects induced by heavy irradiation have been considered.
|
|
6. |
- Etula, Jarkko, et al.
(author)
-
Carbon nanotube membranes for EUV photolithography-a versatile material platform
- 2023
-
In: International Conference on Extreme Ultraviolet Lithography 2023. - 9781510667488
-
Conference paper (peer-reviewed)abstract
- Next generation of high-NA extreme ultraviolet (EUV) photolithography introduces higher power levels and faster reticle accelerations, enabling breakthrough in scanner efficiency. This results in higher temperatures and mechanical stresses on the EUV pellicles. Here we demonstrate scalable carbon nanotube (CNT) membrane mass production from a floating catalyst chemical vapor deposition (FC-CVD) reactor, using a direct dry deposition method. This direct high volume fabrication method yields highly uniform CNT networks with high strength and purity, enabling exceedingly thin CNT pellicles with high transparency at EUV. This end-To-end manufacturing process, starting from reagent gases, enables control and reproducibility over the final nanomaterial product. Control over synthesis allows tailoring of the carbon nanotube diameter and wall count (SWCNT or FWCNT), as well as control over the CNT network morphology such as the density, bundle size, and orientation of CNTs. The combination of this direct fabrication method with the exceptional mechanical and thermal properties of CNTs creates a versatile membrane platform, which can be further modified with post process steps such as purification to remove metal impurities. To enable conformal and thin coatings on CNTs, wet and dry functionalization steps are demonstrated to match the surface chemistry of CNTs to the specific deposition chemistry used in atomic layer (ALD), chemical vapor (CVD), or physical vapor (PVD) deposition processes. Thicker and denser CNT membranes with appropriate coatings are also suitable for other roles, such as filtering debris from an EUV source, blocking DUV photons and electrons, and providing a gas seal for differential pressure.
|
|
7. |
- Khanin, Vasilii M., et al.
(author)
-
Influence of 3d Transition Metal Impurities on Garnet Scintillator Afterglow
- 2020
-
In: Crystal Growth and Design. - : American Chemical Society (ACS). - 1528-7483 .- 1528-7505. ; 20:5, s. 3007-3017
-
Journal article (peer-reviewed)abstract
- Garnet scintillators often suffer from undesired afterglow, the origin of which is not always well-understood. A possible origin is contamination with transition metal (TM) ions. These impurities can act as traps giving rise to afterglow. Alternatively, they may show long-lived (microsecond) d-d emission. Here we present a systematic study on the role of 3d TM impurities in (Lu,Gd)3(GaAl)5O12 garnet scintillators. Scintillator disks intentionally doped with ppm levels of Ti, V, Cr, Mn, Fe, Co, Ni, Cu, or Zn were studied to identify TM-related traps in thermoluminescence (TSL) glow curves and their role in afterglow. For Ti, V, and Cr additional TSL peaks were observed that gave rise to RT afterglow in the 10-2-103 s time range, depending on garnet composition. On the millisecond time scale long-lived red/near-infrared emission was observed from Mn and Fe impurities, explained by spin-forbidden d-d emission. We show that afterglow can be reduced by the use of ultrapure raw materials. Other solutions include bandgap engineering for the garnet host to modify trap depths and applying optical filters to block the spin-forbidden d-d emission. The present study provides an insightful overview of the role of 3d TM impurities on afterglow in Ce-doped scintillators and procedures to predict and reduce afterglow. These insights will aid the development of Ce-doped garnets with superior afterglow behavior.
|
|
8. |
- Khanin, V., et al.
(author)
-
Variation of the conduction band edge of (Lu,Gd) 3 (Ga,Al) 5 O 12 :Ce garnets studied by thermally stimulated luminescence
- 2019
-
In: Journal of Luminescence. - : Elsevier BV. - 0022-2313. ; 211, s. 48-53
-
Journal article (peer-reviewed)abstract
- The shift of the conduction band (CB) edge for thirty different (Lu,Gd) 3 (Ga,Al) 5 O 12 :Ce compositions, with simultaneous variation in Lu/Gd and Ga/Al content was studied using thermally stimulated luminescence (TSL). Specific TSL peaks were related to impurities of Ta, Cr, Yb, Ti and Eu in Lu 1 Gd 2 Ga 3 Al 2 O 12 :Ce ceramics. The shift of Yb-related peak positions (in temperature and trap depth) with composition modification was investigated as well. In Gd-containing (Lu,Gd) 3 (Ga,Al) 5 O 12 compositions a non-monotonous shift of the CB edge with increasing Ga content has been affirmed. The difference between thermal trap depths evaluated from our TSL experiments and optical trap depths obtained from the literature was explained by the role of lattice relaxation.
|
|
9. |
- Kozlova, Anna P., et al.
(author)
-
Luminescence and vacuum ultraviolet excitation spectroscopy of cerium doped Gd3Ga3Al2O12 single crystalline scintillators under synchrotron radiation excitations
- 2020
-
In: Results in Physics. - : Elsevier BV. - 2211-3797. ; 16
-
Journal article (peer-reviewed)abstract
- Cerium doped Gd3Ga3Al2O12 (GGAG) single crystals as well as GGAG:Ce single crystals co-doped by divalent (Mg2+, Ca2+), trivalent (Sc3+) or tetravalent (Zr4+, Ti4+) ions have been studied by means of the excitation luminescence spectroscopy in vacuum ultraviolet spectral range. Synchrotron radiation from the undulator beam was utilized for the luminescence excitation in the energy range from 4.5 to 800 eV. The influence of the co-dopant ions on the excitonic transitions as well as on the intrinsic defects in GGAG was revealed examining the luminescence emission and excitation spectra of both Gd3+ and Ce3+ ions in all single crystals studied. Special attention was paid to the analysis of Ce3+ excitation spectra in VUV spectral range (4.5–45 eV) where multiplication of electronic excitation (MEE) processes occur. It was obtained that GGAG:Ce single crystals having different co-dopant ions reveal distinguished efficiency of MEE. The role of intrinsic defects in MEE processes in the co-doped GGAG:Ce single crystals was elucidated.
|
|
10. |
- Moyano-Galceran, Lidia, et al.
(author)
-
Adaptive RSK-EphA2-GPRC5A signaling switch triggers chemotherapy resistance in ovarian cancer.
- 2020
-
In: EMBO Molecular Medicine. - : EMBO. - 1757-4676 .- 1757-4684. ; 12:4
-
Journal article (peer-reviewed)abstract
- Metastatic cancers commonly activate adaptive chemotherapy resistance, attributed to both microenvironment-dependent phenotypic plasticity and genetic characteristics of cancer cells. However, the contribution of chemotherapy itself to the non-genetic resistance mechanisms was long neglected. Using high-grade serous ovarian cancer (HGSC) patient material and cell lines, we describe here an unexpectedly robust cisplatin and carboplatin chemotherapy-induced ERK1/2-RSK1/2-EphA2-GPRC5A signaling switch associated with cancer cell intrinsic and acquired chemoresistance. Mechanistically, pharmacological inhibition or knockdown of RSK1/2 prevented oncogenic EphA2-S897 phosphorylation and EphA2-GPRC5A co-regulation, thereby facilitating a signaling shift to the canonical tumor-suppressive tyrosine phosphorylation and consequent downregulation of EphA2. In combination with platinum, RSK inhibitors effectively sensitized even the most platinum-resistant EphA2high , GPRC5Ahigh cells to the therapy-induced apoptosis. In HGSC patient tumors, this orphan receptor GPRC5A was expressed exclusively in cancer cells and associated with chemotherapy resistance and poor survival. Our results reveal a kinase signaling pathway uniquely activated by platinum to elicit adaptive resistance. They further identify GPRC5A as a marker for abysmal HGSC outcome and putative vulnerability of the chemo-resistant cells to RSK1/2-EphA2-pS897 pathway inhibition.
|
|