| 1. |
|
|
| 2. |
|
|
| 3. |
- Di Benedetto, H, et al.
(author)
-
Fatigue of bituminous mixtures
- 2004
-
In: Materials and Structures. - 1359-5997 .- 1871-6873. ; 37:267, s. 202-216
-
Journal article (peer-reviewed)abstract
- This paper presents an interlaboratory test campaign organized by the RILEM 182-PEB Technical Committee. In the campaign, 11 different test methods, comprising uniaxial tension/compression, 2-, 3- and 4-point bending and indirect-tension tests, were utilized in order to investigate fatigue characteristics of a dense graded asphalt concrete mixture. The testing conditions specified were sinusoidal excitation at 10Hz and 10degreesC using controlled strain and stress modes. In total, more than 150 fatigue tests were carried out during the investigation. The fatigue test results were analyzed using both classical as well as continuum damage mechanics approaches. The fatigue test results obtained using the classical fatigue approach are considerably influenced by test type and mode of loading (controlled stress or strain) used. Consequently, this approach has limited use in realistic fatigue characterization of bituminous materials and pavement structures. In contrast to the classical approach, models founded on continuum damage theory may serve to isolate intrinsic fatigue characteristics from the influence of so-called biased effects, which are largely caused by the accelerated laboratory testing. The continuum damage models investigated may constitute steps, towards a rational mechanistic fatigue characterization model, which are important for effective future pavement design.
|
|
| 4. |
- Giunta, RE, et al.
(author)
-
Correction: ESPRAS Survey: National and European Societies for Plastic Surgeons
- 2024
-
In: Handchirurgie, Mikrochirurgie, plastische Chirurgie : Organ der Deutschsprachigen Arbeitsgemeinschaft fur Handchirurgie : Organ der Deutschsprachigen Arbeitsgemeinschaft fur Mikrochirurgie der Peripheren Nerven und Gefasse : Organ der V.... - 1439-3980. ; 56:2, s. e2-
-
Journal article (peer-reviewed)
|
|
| 5. |
- Kehoe, Laura, et al.
(author)
-
Make EU trade with Brazil sustainable
- 2019
-
In: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 364:6438, s. 341-
-
Journal article (other academic/artistic)
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
- Di Benedetto, Luigi, et al.
(author)
-
Strain balance approach for optimized signal-to-noise ratio in SiGe quantum well bolometers
- 2009
-
In: ESSDERC 2009 - Proceedings of the 39th European Solid-State Device Research Conference. - 9781424443536 ; , s. 101-104
-
Conference paper (peer-reviewed)abstract
- This work presents thermal and electrical characterization of SiGe/Si multi-quantum wells (MQWs) with different layer profiles in complete bolometer structures. The thermal property of the bolometers was studied by measuring thermal coefficient of resistivity (TCR) through I-V curves for five temperatures (25, 40, 55, 80 and 100°C) and for four different pixel areas. The results show a strong dependency of TCR on the Si/SiGe layer thickness and the presence of dopant impurity in the MQW. The noise measurements of MQWs were performed carefully by eliminating all external contributions and the noise spectroscopy provided the noise characteristic parameters. The results demonstrate that the noise depends on the geometric size of the MQW and it increases with decreasing of the pixel area. The investigations show the noise level in the bolometer structures is sensitive to any dopant segregation from the contact layers.
|
|
| 9. |
- Di Benedetto, Maria Domenica, et al.
(author)
-
Industrial control over wireless networks
- 2010
-
In: International Journal of Robust and Nonlinear Control. - : JOHN WILEY & SONS LTD. - 1049-8923 .- 1099-1239. ; 20:2, s. 119-122
-
Journal article (other academic/artistic)
|
|
| 10. |
- Edgecock, T. R., et al.
(author)
-
High intensity neutrino oscillation facilities in Europe
- 2013
-
In: Physical Review Special Topics - Accelerators and Beams. - : American Physical Society. - 1098-4402. ; 16:2, s. 021002-
-
Journal article (peer-reviewed)abstract
- The EUROnu project has studied three possible options for future, high intensity neutrino oscillation facilities in Europe. The first is a Super Beam, in which the neutrinos come from the decay of pions created by bombarding targets with a 4 MW proton beam from the CERN High Power Superconducting Proton Linac. The far detector for this facility is the 500 kt MEMPHYS water Cherenkov, located in the Frejus tunnel. The second facility is the Neutrino Factory, in which the neutrinos come from the decay of mu(+) and mu(-) beams in a storage ring. The far detector in this case is a 100 kt magnetized iron neutrino detector at a baseline of 2000 km. The third option is a Beta Beam, in which the neutrinos come from the decay of beta emitting isotopes, in particular He-6 and Ne-18, also stored in a ring. The far detector is also the MEMPHYS detector in the Frejus tunnel. EUROnu has undertaken conceptual designs of these facilities and studied the performance of the detectors. Based on this, it has determined the physics reach of each facility, in particular for the measurement of CP violation in the lepton sector, and estimated the cost of construction. These have demonstrated that the best facility to build is the Neutrino Factory. However, if a powerful proton driver is constructed for another purpose or if the MEMPHYS detector is built for astroparticle physics, the Super Beam also becomes very attractive.
|
|
