| 1. |
- Heinonen, M., et al.
(författare)
-
New Primary Standards for Establishing SI Traceability for Moisture Measurements in Solid Materials
- 2018
-
Ingår i: International journal of thermophysics. - : Springer. - 0195-928X .- 1572-9567. ; 39
-
Tidskriftsartikel (refereegranskat)abstract
- A European research project METefnet addresses a fundamental obstacle to improving energy-intensive drying process control: due to ambiguous reference analysis methods and insufficient methods for estimating uncertainty in moisture measurements, the achievable accuracy in the past was limited and measurement uncertainties were largely unknown. This paper reports the developments in METefnet that provide a sound basis for the SI traceability: four new primary standards for realizing the water mass fraction were set up, analyzed and compared to each other. The operation of these standards is based on combining sample weighing with different water vapor detection techniques: cold trap, chilled mirror, electrolytic and coulometric Karl Fischer titration. The results show that an equivalence of 0.2 % has been achieved between the water mass fraction realizations and that the developed methods are applicable to a wide range of materials.
|
|
| 2. |
- Merlone, A., et al.
(författare)
-
The MeteoMet project - metrology for meteorology: challenges and results
- 2015
-
Ingår i: Meteorological Applications. - : Wiley. - 1350-4827 .- 1469-8080. ; 22, s. 820-829
-
Tidskriftsartikel (refereegranskat)abstract
- The study describes significant outcomes of the Metrology for Meteorology' project, MeteoMet, which is an attempt to bridge the meteorological and metrological communities. The concept of traceability, an idea used in both fields but with a subtle difference in meaning, is at the heart of the project. For meteorology, a traceable measurement is the one that can be traced back to a particular instrument, time and location. From a metrological perspective, traceability further implies that the measurement can be traced back to a primary realization of the quantity being measured in terms of the base units of the International System of Units, the SI. These two perspectives reflect long-standing differences in culture and practice and this project - and this study - represents only the first step towards better communication between the two communities. The 3 year MeteoMet project was funded by the European Metrology Research Program (EMRP) and involved 18 European National Metrological Institutes, 3 universities and 35 collaborating stakeholders including national meteorology organizations, research institutes, universities, associations and instrument companies. The project brought a metrological perspective to several long-standing measurement problems in meteorology and climatology, varying from conventional ground-based measurements to those made in the upper atmosphere. It included development and testing of novel instrumentation as well as improved calibration procedures and facilities, instrument intercomparison under realistic conditions and best practice dissemination. Additionally, the validation of historical temperature data series with respect to measurement uncertainties and a methodology for recalculation of the values were included.
|
|
| 3. |
- Bell, S., et al.
(författare)
-
METefnet : Developments in metrology for moisture in materials
- 2015
-
Ingår i: 17th International Congress of Metrology, CIM 2015. - Les Ulis, France : EDP Sciences.
-
Konferensbidrag (refereegranskat)abstract
- Bien que les mesures de teneur en eau soient largement utilisées dans l'industrie, les considérations métrologiques quant à cette mesure ne sont pas complètement abouties de sorte à fournir des mesures fiables et traçables au SI. Afin de remédier à ceci, le projet de recherche conjoint, Joint Research Project SIB64 “METefnet – Metrology for moisture in materials”, est actuellement en cours, et contribue au programme européen de recherche en métrologie European Metrology Research Programme. Le projet METefnet a pour objectifs de développer et d'améliorer l'approche métrologique de ce sujet. Ceci inclus notamment: le travail sur de nouvelles méthodes de référence pour évaluer la fraction massique en eau, l'amélioration des mesures mettant en œuvre la méthode primaire de type titration Karl Fischer, le développement de nouveaux matériaux de référence certifiés présentant une très bonne stabilité et permettant une traçabilité au SI, le développement de nouveaux étalons de transfert, la réalisation d'études visant à quantifier et réduire les effets liés à la prise d'échantillon, son transport et sa manipulation, le développement d'une nouvelle méthode pour étalonner les instruments mesurant l'humidité de surface, et l'amélioration des méthodes d'estimation d'incertitudes de ces mesures. Ce travail, réalisé dans le domaine de la métrologie de l'humidité au sein des matériaux, couvre à la fois le mesurande décrit comme étant spécifiquement la teneur en eau, seule, dans les matériaux, mais également un mesurande plus large pouvant inclure l'eau ainsi que d'autres liquides ou composés organiques volatiles; ceci afin de bien mettre en exergue la différence qui peut être observée entre ces deux mesurandes. Le projet global a pour objectif de soutenir une action de dissémination et de traçabilité au système SI des mesures de teneur en eau dans les matériaux avec une exactitude optimale et de développer une infrastructure métrologique cohérente pour ce type de mesures. Le travail technique ainsi que les dernières avancées vous sont ainsi présentées.
|
|
| 4. |
- Heinonen, M., et al.
(författare)
-
Investigation of the Equivalence of National Dew-Point Temperature Realizations in the -50 C to + 20 C Range
- 2012
-
Ingår i: International journal of thermophysics. - : Springer Science and Business Media LLC. - 0195-928X .- 1572-9567. ; 33:8-9, s. 1422-1437
-
Tidskriftsartikel (refereegranskat)abstract
- In the field of humidity quantities, the first CIPM key comparison, CCT-K6 is at its end. The corresponding European regional key comparison, EUROMET.T-K6, was completed in early 2008, about 4 years after the starting initial measurements in the project. In total, 24 NMIs from different countries took part in the comparison. This number includes 22 EURAMET countries, and Russia and South Africa. The comparison covered the dew-point temperature range from -50 C to +20 C. It was carried out in three parallel loops, each with two chilled mirror hygrometers as transfer standards in each loop. The comparison scheme was designed to ensure high quality results with evenly spread workload for the participants. It is shown that the standard uncertainty due to the long-term instability was smaller than 0.008 C in all loops. The standard uncertainties due to links between the loops were found to be smaller than 0.025 C at -50 C and 0.010 C elsewhere. Conclusions on the equivalence of the dew-point temperature standards are drawn on the basis of calculated bilateral degrees of equivalence and deviations from the EURAMET comparison reference values (ERV). Taking into account 16 different primary dew-point realizations and 8 secondary realizations, the results demonstrate the equivalence of a large number of laboratories at an uncertainty level that is better than achieved in other multilateral comparisons so far in the humidity field.
|
|
