1. |
|
|
2. |
- Ponzoni, Andrea, et al.
(author)
-
Metal oxide nanowire and thin-film-based gas sensors for chemical warfare simulants detection
- 2008
-
In: IEEE Sensors Journal. - 1530-437X .- 1558-1748. ; 8:6, s. 735-742
-
Journal article (peer-reviewed)abstract
- This work concerns with metal oxide (MOX) gas sensors based on nanowires and thin films. We focus on chemical warfare agents (CWAs) detection to compare these materials from the functional point-of-view. We work with different chemicals including simulants for Sarin nerve agents, vescicant gases, cyanide agents, and analytes such as ethanol, acetone, ammonia, and carbon monoxide that can be produced by everyday activities causing false alarms. Explorative data analysis has been used to demonstrate the different sensing performances of nanowires and thin films. Within the chosen application, our analysis reveal that the introduction of nanowires inside the array composed by thin films can improve its sensing capability. Cyanide simulants have been detected at concentrations close to 1 ppm, lower than the Immediately Dangerous for Life and Health (IDLH) value of the respective warfare agent. Higher sensitivity has been obtained to simulants for Sarin and vescicant gases, which have been detected at concentrations close or even lower than 100 ppb. Results demonstrate the suitability of the proposed array to selectively detect CWA simulants with respect to some compounds produced by everyday activities. © 2008 IEEE.
|
|
3. |
- Ponzoni, Andrea, et al.
(author)
-
Nanostructured Metal Oxide Gas Sensors, a Survey of Applications Carried out at SENSOR Lab, Brescia (Italy) in the Security and Food Quality Fields
- 2012
-
In: Sensors. - : MDPI AG. - 1424-8220. ; 12:12, s. 17023-17045
-
Journal article (peer-reviewed)abstract
- In this work we report on metal oxide (MOX) based gas sensors, presenting the work done at the SENSOR laboratory of the CNR-IDASC and University of Brescia, Italy since the 80s up to the latest results achieved in recent times. In particular we report the strategies followed at SENSOR during these 30 years to increase the performance of MOX sensors through the development of different preparation techniques, from Rheotaxial Growth Thermal Oxidation (RGTO) to nanowire technology to address sensitivity and stability, and the development of electronic nose systems and pattern recognition techniques to address selectivity. We will show the obtained achievement in the context of selected applications such as safety and security and food quality control.
|
|
4. |
- Sberveglieri, Giorgio, et al.
(author)
-
Synthesis and integration of tin oxide nanowires into an electronic nose
- 2012
-
In: Vacuum. - : Elsevier BV. - 0042-207X .- 1879-2715. ; 86:5, s. 532-535
-
Journal article (peer-reviewed)abstract
- Single crystal nanostructures of semiconducting tin oxides have been fabricated and characterized as sensing materials for implementation in an electronic nose. The nanowires exhibit exceptional crystalline quality and a very high length-to-width ratio, resulting in enhanced sensing capability as well as long-term material stability for prolonged operation. A sensing device based on SnO2 nanowires has been fabricated and comparatively tested in an array of chemical sensor with conventional thin film sensing device. Preliminary measurements ethanol/water mixtures demonstrate that nanowire-based sensors can be favourably implemented in the electronic nose and that they perform comparably with the conventional thin film layers.
|
|
5. |
|
|
6. |
- Berti, Francesca, et al.
(author)
-
One-Dimensional Polyaniline Nanotubes for Enhanced Chemical and Biochemical Sensing
- 2011
-
In: Sensors and Microsystems. - Dordrecht : Springer Netherlands. - 9789400713239 ; , s. 311-315
-
Book chapter (other academic/artistic)abstract
- In this work we explored a simple, cheap and fast route to grow polyaniline (PANI) nanotubes arranged in an ordered structure directly on an electrode surface by electrochemical polymerisation. The deposited nanostructures were electrochemically and morphologically characterised and then used as a functional substrate for biochemical sensing by combining the intrinsic advantages of nanostructures as optimal transducers and the well known benefits of molecularly imprinted polymers (MIPs) as receptors. The hybrid nanostructured-MIP sensor was applied to the molecular recognition of catechol. Moreover, a gas sensing application was also investigated by exploiting resistance variation of the polymer in presence of different gases (CO, NO2, NH3 and ethanol).
|
|
7. |
- Berti, Francesca, et al.
(author)
-
Quasi-monodimensional polyaniline nanostructures for enhanced molecularly imprinted polymer-based sensing
- 2010
-
In: Biosensors & bioelectronics. - : Elsevier Science B.V., Amsterdam.. - 0956-5663 .- 1873-4235. ; 26:2, s. 497-503
-
Journal article (peer-reviewed)abstract
- Recent advances in nanotechnology have allowed significant progress in utilising cutting-edge techniques associated with nanomaterials and nano-fabrication to expand the scope and capability of biosensors to a new level of novelty and functionality. The aim of this work was the development and characterisation of conductive polyaniline (PANI) nanostructures for applications in electrochemical biosensing. We explore a simple, inexpensive and fast route to grow PANI nanotubes, arranged in an ordered structure directly on an electrode surface, by electrochemical polymerisation using alumina nanoporous membranes as a nano-mould. The deposited nanostructures have been characterised electrochemically and morphologically prior to grafting with a molecularly imprinted polymer (MIP) receptor in order to create a model sensor for catechol detection. In this way, PANI nanostructures resulted in a conductive nanowire system which allowed direct electrical connection between the electrode and the synthetic receptor (MIP). To our knowledge, this is the first example of integration between molecularly imprinted polymers and PANI nanostructured electrodes. The advantages of using nanostructures in this particular biosensing application have been evaluated by comparing the analytical performance of the sensor with an analogous non-nanostructured MIP-sensor for catechol detection that was previously developed. A significantly lower limit of detection for catechol has been obtained (29 nM, one order of magnitude), thus demonstrating that the nanostructures are capable of improving the analytical performance of the sensor. (C) 2010 Elsevier B.V. All rights reserved.
|
|
8. |
- Comini, Elisabetta, et al.
(author)
-
Effects of Ta/Nb-doping on titania-based thin films for gas-sensing
- 2005
-
In: Sensors and actuators. B, Chemical. - : Elsevier BV. - 0925-4005 .- 1873-3077. ; 108:1-2 SPEC. ISS., s. 21-28
-
Journal article (peer-reviewed)abstract
- Thin films of titania with the addition of niobium and tantalum have been achieved by reactive sputtering process. Structural and morphological studies have been carried out by means of XRD, RBS, TEM and AFM in order to correlate the microstructural features to the sensing performance of the layers. The films proved sensitive to ethanol and carbon monoxide and ammonia. In the case of niobium addition, it was shown that annealing temperature and niobium content strongly influence the gas response of the films converting a n-type response, which is typical of pure TiO2 and of most of metal-oxide sensors, to a p-type response; this peculiarity is crucial for the discrimination of different gases. In the case of tantalum addition, the annealing treatment at 800 °C led only to a phase transformation that reduced the sensing performance of the layer. High sensitivity to CO is achieved with anatase or mixed anatase and rutile phases, while the rutile phase only exhibit a low gas sensitivity. © 2005 Elsevier B.V. All rights reserved.
|
|
9. |
- Comini, Elisabetta, et al.
(author)
-
Highly sensitive single crystalline metal oxide nanowires gas sensors
- 2006
-
In: Proceedings of the 2006 Conference on Optoelectronic and Microelectronic Materials and Devices. - Piscataway, NJ : IEEE Communications Society. - 1424405785 - 9781424405787 ; , s. 315-320
-
Conference paper (peer-reviewed)abstract
- Interest in nanowires of metal oxide oxides has been exponentially growing in the last years, due to the attracting potential of application in electronic, optical and sensor field. We have focused our attention on the sensing properties of semiconducting nanowires as conductometric and optical gas sensors. Single crystal nanostructures In2O3, SnO 2, and ZnO were synthesized to explore and study their capability in form of multi-nanowires sensors. © 2006 IEEE.
|
|
10. |
- Comini, Elisabetta, et al.
(author)
-
Metal oxide nanowires : Preparation and application in gas sensing
- 2009
-
In: Journal of Molecular Catalysis A. - : Elsevier BV. - 1381-1169 .- 1873-314X. ; 305:1-2, s. 170-177
-
Journal article (peer-reviewed)abstract
- Quasi one-dimensional nanowires of metal oxides are promising for the development of nano-devices. Sn, In, and Zn oxides were produced in form of single-crystalline nanowires through condensation from vapor phase. Furthermore longitudinal and radial heterostructures have been prepared. Nanowires growth occurs in controlled condition and allows the exploitation of size reduction effects on the electrical response to gases. Preparation, microstructural, morphological and electrical characterizations of nanowires are presented and the peculiarities of these innovative structures are highlighted. © 2009 Elsevier B.V. All rights reserved.
|
|