| 1. |
- Birgisson, Hakon, et al.
(author)
-
Two new thermostable alpha-L-rhamnosidases from a novel thermophilic bacterium
- 2004
-
In: Enzyme and Microbial Technology. - : Elsevier BV. - 0141-0229. ; 34:6, s. 561-571
-
Journal article (peer-reviewed)abstract
- Two new thermostable alpha-L-rhamnosidases with novel substrate hydrolysis pattern were cloned and expressed from a new thermophilic bacterium. Fragments of the two alpha-L-rhamnosidase genes, rhmA and rhmB were identified in a partially sequenced genome of the bacterium. Whole genes were recovered by amplifying flanking sequences with single specific primers and nonspecific walking primers. The recovered Genes were then cloned into Escherichia coli and their enzymes produced and purified. Both enzymes were dimers and the MW of the monomers. were 104 and 107 kDa for RhmA and RhmB, respectively. Both rhamnosidases had a temperature optimum at 70degreesC. RhmA had pH optimum at 7.9 and RhmB had a broad pH optimum of 5.0 to 6.9 and RhmA had over 50% activity in the pH interval 5.0 to 8.7 and RhmB in the pH interval 4.0 to 7.9. Both enzymes had over 20% residual activity after 24-h incubation at 60degreesC. RhmA and RhmB had K values of 0.46 and 0.66 mM and V-max values of 134 and 352 U mg(-1) respectively, on p-nitrophenyl-alpha-L-rhamnopyrano side. Both rhamnosidases were active on both alpha-1,2- and alpha-1,6-linkages to beta-D-glucoside. (C) 2004 Elsevier Inc. All rights reserved.
|
|
| 2. |
- Kristjansdottir, Thordis, et al.
(author)
-
Engineering the carotenoid biosynthetic pathway in Rhodothermus marinus for lycopene production
- 2020
-
In: Metabolic Engineering Communications. - : Elsevier BV. - 2214-0301. ; 11
-
Journal article (peer-reviewed)abstract
- Rhodothermus marinus has the potential to be well suited for biorefineries, as an aerobic thermophile that produces thermostable enzymes and is able to utilize polysaccharides from different 2nd and 3rd generation biomass. The bacterium produces valuable chemicals such as carotenoids. However, the native carotenoids are not established for industrial production and R. marinus needs to be genetically modified to produce higher value carotenoids. Here we genetically modified the carotenoid biosynthetic gene cluster resulting in three different mutants, most importantly the lycopene producing mutant TK-3 (ΔtrpBΔpurAΔcruFcrtB::trpBcrtBT.thermophilus). The genetic modifications and subsequent structural analysis of carotenoids helped clarify the carotenoid biosynthetic pathway in R. marinus. The nucleotide sequences encoding the enzymes phytoene synthase (CrtB) and the previously unidentified 1′,2′-hydratase (CruF) were found fused together and encoded by a single gene in R. marinus. Deleting only the cruF part of the gene did not result in an active CrtB enzyme. However, by deleting the entire gene and inserting the crtB gene from Thermus thermophilus, a mutant strain was obtained, producing lycopene as the sole carotenoid. The lycopene produced by TK-3 was quantified as 0.49 g/kg CDW (cell dry weight).
|
|
| 3. |
- Nordberg Karlsson, Eva, et al.
(author)
-
Metabolic engineering of thermophilic bacteria for production of biotechnologically interesting compounds
- 2020
-
In: Biotechnological applications of extremophilic microorganisms. - : De Gruyter. - 9783110424331 ; , s. 73-96
-
Book chapter (peer-reviewed)abstract
- Many thermophilic bacteria are efficient biomass degraders (producing polysaccharide degrading enzymes and utilizing a great variety of substrates, e.g. lignocellulosic polymers, pentoses, hexoses, as well sugar acids, and sugar alcohols). This makes them interesting organisms as potential cell factories in a circular bioeconomy. Lignocellulosic and marine macroalgal biomasses are regarded as sustainable biorefinery feedstocks for the production of energy carriers and platform and specialty chemicals, thereby meeting impending fossil fuel shortage and counteracting accumulation of greenhouse gasses. However, progress in using thermophilic bacteria that utilize these feedstocks as carbon sources has been hampered by the lack of suitable engineering tools to improve the production profiles of interesting target metabolites as specific synthetic production pathways need to be inserted/modified or existing pathways optimized by metabolic engineering. In this chapter, we review the progress on the use of thermophilic bacteria in metabolic engineering and the available engineering tools and give examples of species for which successful engineering has been accomplished. Today, the majority of thermophilic bacteria targeted for production of compounds of industrial interest by metabolic engineering belong to the phylum Firmicutes (e.g. Thermoanaerobacterium, Caldocellulosiruptor, Geobacillus, and Bacillus), taking advantage of anaerobic catabolic pathways producing organic acids and alcohols. However, there are additional and aerobic species gaining interest concerning biomass degradation and the ability of carbon dioxide fixation as well as production of molecules of interest, and some examples of this are also given.
|
|
| 4. |
- Aevarsson, Arnthór, et al.
(author)
-
Going to extremes - a metagenomic journey into the dark matter of life
- 2021
-
In: FEMS Microbiology Letters. - : Oxford University Press (OUP). - 1574-6968. ; 368:12
-
Research review (peer-reviewed)abstract
- The Virus-X-Viral Metagenomics for Innovation Value-project was a scientific expedition to explore and exploit uncharted territory of genetic diversity in extreme natural environments such as geothermal hot springs and deep-sea ocean ecosystems. Specifically, the project was set to analyse and exploit viral metagenomes with the ultimate goal of developing new gene products with high innovation value for applications in biotechnology, pharmaceutical, medical, and the life science sectors. Viral gene pool analysis is also essential to obtain fundamental insight into ecosystem dynamics and to investigate how viruses influence the evolution of microbes and multicellular organisms. The Virus-X Consortium, established in 2016, included experts from eight European countries. The unique approach based on high throughput bioinformatics technologies combined with structural and functional studies resulted in the development of a biodiscovery pipeline of significant capacity and scale. The activities within the Virus-X consortium cover the entire range from bioprospecting and methods development in bioinformatics to protein production and characterisation, with the final goal of translating our results into new products for the bioeconomy. The significant impact the consortium made in all of these areas was possible due to the successful cooperation between expert teams that worked together to solve a complex scientific problem using state-of-the-art technologies as well as developing novel tools to explore the virosphere, widely considered as the last great frontier of life.
|
|
| 5. |
- Ahlqvist, Josefin, et al.
(author)
-
Crystal structure and initial characterization of a novel archaeal-like Holliday junction-resolving enzyme from Thermus thermophilus phage Tth15-6
- 2022
-
In: Acta crystallographica. Section D, Structural biology. - 2059-7983. ; 78:Pt 2, s. 212-227
-
Journal article (peer-reviewed)abstract
- This study describes the production, characterization and structure determination of a novel Holliday junction-resolving enzyme. The enzyme, termed Hjc_15-6, is encoded in the genome of phage Tth15-6, which infects Thermus thermophilus. Hjc_15-6 was heterologously produced in Escherichia coli and high yields of soluble and biologically active recombinant enzyme were obtained in both complex and defined media. Amino-acid sequence and structure comparison suggested that the enzyme belongs to a group of enzymes classified as archaeal Holliday junction-resolving enzymes, which are typically divalent metal ion-binding dimers that are able to cleave X-shaped dsDNA-Holliday junctions (Hjs). The crystal structure of Hjc_15-6 was determined to 2.5 Å resolution using the selenomethionine single-wavelength anomalous dispersion method. To our knowledge, this is the first crystal structure of an Hj-resolving enzyme originating from a bacteriophage that can be classified as an archaeal type of Hj-resolving enzyme. As such, it represents a new fold for Hj-resolving enzymes from phages. Characterization of the structure of Hjc_15-6 suggests that it may form a dimer, or even a homodimer of dimers, and activity studies show endonuclease activity towards Hjs. Furthermore, based on sequence analysis it is proposed that Hjc_15-6 has a three-part catalytic motif corresponding to E-SD-EVK, and this motif may be common among other Hj-resolving enzymes originating from thermophilic bacteriophages.
|
|
| 6. |
- Ahlqvist, Josefin, et al.
(author)
-
Crystal structure of DNA polymerase I from Thermus phage G20c
- 2022
-
In: Acta crystallographica. Section D, Structural biology. - 2059-7983. ; 78:Pt 11, s. 1384-1398
-
Journal article (peer-reviewed)abstract
- This study describes the structure of DNA polymerase I from Thermus phage G20c, termed PolI_G20c. This is the first structure of a DNA polymerase originating from a group of related thermophilic bacteriophages infecting Thermus thermophilus, including phages G20c, TSP4, P74-26, P23-45 and phiFA and the novel phage Tth15-6. Sequence and structural analysis of PolI_G20c revealed a 3'-5' exonuclease domain and a DNA polymerase domain, and activity screening confirmed that both domains were functional. No functional 5'-3' exonuclease domain was present. Structural analysis also revealed a novel specific structure motif, here termed SβαR, that was not previously identified in any polymerase belonging to the DNA polymerases I (or the DNA polymerase A family). The SβαR motif did not show any homology to the sequences or structures of known DNA polymerases. The exception was the sequence conservation of the residues in this motif in putative DNA polymerases encoded in the genomes of a group of thermophilic phages related to Thermus phage G20c. The structure of PolI_G20c was determined with the aid of another structure that was determined in parallel and was used as a model for molecular replacement. This other structure was of a 3'-5' exonuclease termed ExnV1. The cloned and expressed gene encoding ExnV1 was isolated from a thermophilic virus metagenome that was collected from several hot springs in Iceland. The structure of ExnV1, which contains the novel SβαR motif, was first determined to 2.19 Å resolution. With these data at hand, the structure of PolI_G20c was determined to 2.97 Å resolution. The structures of PolI_G20c and ExnV1 are most similar to those of the Klenow fragment of DNA polymerase I (PDB entry 2kzz) from Escherichia coli, DNA polymerase I from Geobacillus stearothermophilus (PDB entry 1knc) and Taq polymerase (PDB entry 1bgx) from Thermus aquaticus.
|
|
| 7. |
- Ara, Kazi Zubaida Gulshan, et al.
(author)
-
Characterization and diversity of the complete set of GH family 3 enzymes from Rhodothermus marinus DSM 4253
- 2020
-
In: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 10
-
Journal article (peer-reviewed)abstract
- The genome of Rhodothermus marinus DSM 4253 encodes six glycoside hydrolases (GH) classified under GH family 3 (GH3): RmBgl3A, RmBgl3B, RmBgl3C, RmXyl3A, RmXyl3B and RmNag3. The biochemical function, modelled 3D-structure, gene cluster and evolutionary relationships of each of these enzymes were studied. The six enzymes were clustered into three major evolutionary lineages of GH3: β-N-acetyl-glucosaminidases, β-1,4-glucosidases/β-xylosidases and macrolide β-glucosidases. The RmNag3 with additional β-lactamase domain clustered with the deepest rooted GH3-lineage of β-N-acetyl-glucosaminidases and was active on acetyl-chitooligosaccharides. RmBgl3B displayed β-1,4-glucosidase activity and was the only representative of the lineage clustered with macrolide β-glucosidases from Actinomycetes. The β-xylosidases, RmXyl3A and RmXyl3B, and the β-glucosidases RmBgl3A and RmBgl3C clustered within the major β-glucosidases/β-xylosidases evolutionary lineage. RmXyl3A and RmXyl3B showed β-xylosidase activity with different specificities for para-nitrophenyl (pNP)-linked substrates and xylooligosaccharides. RmBgl3A displayed β-1,4-glucosidase/β-xylosidase activity while RmBgl3C was active on pNP-β-Glc and β-1,3-1,4-linked glucosyl disaccharides. Putative polysaccharide utilization gene clusters were also investigated for both R. marinus DSM 4253 and DSM 4252T (homolog strain). The analysis showed that in the homolog strain DSM 4252T Rmar_1080 (RmXyl3A) and Rmar_1081 (RmXyl3B) are parts of a putative polysaccharide utilization locus (PUL) for xylan utilization.
|
|
| 8. |
- Gulshan Kazi, Zubaida, et al.
(author)
-
A CGTase with high coupling activity using γ-cyclodextrin isolated from a novel strain clustering under the genus Carboxydocella.
- 2015
-
In: Glycobiology. - : Oxford University Press (OUP). - 1460-2423 .- 0959-6658. ; 25:5, s. 514-523
-
Journal article (peer-reviewed)abstract
- Cyclodextrin glucanotransferases (CGTases; EC 2.4.1.19) have mainly been characterized for their ability to produce cyclodextrins (CDs) from starch in an intramolecular transglycosylation reaction (cyclization). However, this class of enzymes can also catalyze intermolecular transglycosylation via disproportionation or coupling reactions onto a wide array of acceptors and could therefore be valuable as a tool for glycosylation. In this paper, we report the gene isolation, via the CODEHOP-strategy, expression and characterization of a novel CGTase (CspCGT13) from a Carboxydocella sp. This enzyme is the first glycoside hydrolase isolated from the genus, indicating starch degradation via cyclodextrin production in the Carboxydocella strain. The fundamental reactivities of this novel CGTase are characterized and compared to two commercial CGTases, assayed under identical condition, in order to facilitate interpretation of the results. The comparison showed that the enzyme, CspCGT13, displayed high coupling activity using γ-CD as donor, despite preferentially forming α and β-CD in the cyclization reaction using wheat starch as substrate. Comparison of subsite conservation within previously characterized CGTases showed significant sequence variation in subsite -3 and -7, which may be important for the coupling activity.
|
|
| 9. |
- Labes, Antje, et al.
(author)
-
Novel members of glycoside hydrolase family 13 derived from environmental DNA
- 2008
-
In: Applied and Environmental Microbiology. - 0099-2240. ; 74:6, s. 1914-1921
-
Journal article (peer-reviewed)abstract
- Starch and pullulan-modifying enzymes of the alpha-amylase family (glycoside hydrolase family 13) have several industrial applications. To date, most of these enzymes have been derived from isolated organisms. To increase the number of members of this enzyme family, in particular of the thermophilic representatives, we have applied a consensus primer-based approach using DNA from enrichments from geothermal habitats. With this approach, we succeeded in isolating three new enzymes: a neopullulanase and two cyclodextrinases. Both cyclodextrinases displayed significant maltogenic amylase side activity, while one showed significant neopullulanase side activity. Specific motifs and domains that correlated with enzymatic activities were identified; e.g., the presence of the N domain was correlated with cyclodextrinase activity. The enzymes exhibited stability under thermophilic conditions and showed features appropriate for biotechnological applications.
|
|
| 10. |
- Linares-Pastén, Javier A., et al.
(author)
-
Modeled 3D-Structures of Proteobacterial Transglycosylases from Glycoside Hydrolase Family 17 Give Insight in Ligand Interactions Explaining Differences in Transglycosylation Products
- 2021
-
In: Applied Sciences (Switzerland). - : MDPI AG. - 2076-3417. ; 11:9
-
Journal article (peer-reviewed)abstract
- The structures of glycoside hydrolase family 17 (GH17) catalytic modules from modular proteins in the ndvB loci in Pseudomonas aeruginosa (Glt1), P. putida (Glt3) and Bradyrhizobium diazoefficiens (previously B. japonicum) (Glt20) were modeled to shed light on reported differences between these homologous transglycosylases concerning substrate size, preferred cleavage site (from reducing end (Glt20: DP2 product) or non-reducing end (Glt1, Glt3: DP4 products)), branching (Glt20) and linkage formed (1,3-linkage in Glt1, Glt3 and 1,6-linkage in Glt20). Hybrid models were built and stability of the resulting TIM-barrel structures was supported by molecular dynamics simulations. Catalytic amino acids were identified by superimposition of GH17 structures, and function was verified by mutagenesis using Glt20 as template (i.e., E120 and E209). Ligand docking revealed six putative subsites (−4, −3, −2, −1, +1 and +2), and the conserved interacting residues suggest substrate binding in the same orientation in all three transglycosylases, despite release of the donor oligosaccharide product from either the reducing (Glt20) or non-reducing end (Glt1, Gl3). Subsites +1 and +2 are most conserved and the difference in release is likely due to changes in loop structures, leading to loss of hydrogen bonds in Glt20. Substrate docking in Glt20 indicate that presence of covalently bound donor in glycone subsites −4 to −1 creates space to accommodate acceptor oligosaccharide in alternative subsites in the catalytic cleft, promoting a branching point and formation of a 1,6-linkage. The minimum donor size of DP5, can be explained assuming preferred binding of DP4 substrates in subsite −4 to −1, preventing catalysis.
|
|
