| 1. |
- Fu, Lixin, et al.
(author)
-
Nanocoating inside porous PE separator enables enhanced ionic transport of GPE and stable cycling of Li-metal anode
- 2019
-
In: Research on chemical intermediates (Print). - : Springer Science and Business Media LLC. - 0922-6168 .- 1568-5675. ; 45:10, s. 4959-4973
-
Journal article (peer-reviewed)abstract
- In this paper, a simple and feasible method for preparing gel polymer electrolyte (GPE) with good ionic transport properties and mechanical stability is proposed. A ZrO2/KH570/PU/P123 layer was formed on the outer and inner pore surfaces of PE separator before in situ polymerization by a simple one-step dipping coating process. This coating layer changes the PE separator surface from hydrophobic to hydrophilic, and therefore facilitates the uniform spreading of the GPE precursor solution on the PE surface to enable the formation of highly uniform GPE. Moreover, it effectively compensates the negative effects of in situ gelatinization on the ionic transport behavior of the final PE-supported GPE. This GPE possesses excellent ion transport properties and mechanical stability, as well as improves the static and dynamic interfacial stability with lithium metal anode. When using metallic lithium and LiCoO2 to assemble cells, this PE-supported GPE affords improved C-rate capability, cycling performance and effective dendrite inhibition. [GRAPHICS] .
|
|
| 2. |
- Jin, Rui, et al.
(author)
-
High Li+ Ionic Flux Separator Enhancing Cycling Stability of Lithium Metal Anode
- 2018
-
In: ACS Sustainable Chemistry and Engineering. - : AMER CHEMICAL SOC. - 2168-0485. ; 6:3, s. 2961-2968
-
Journal article (peer-reviewed)abstract
- The metallic lithium anode provides unparalleled opportunities for rechargeable batteries with very high energy density. A main problem hindering the development of cells using metallic lithium anodes stems from the electrochemical instability of the interface between metallic lithium and organic liquid electrolytes. This paper reports an approach rationally designing the surface characteristic of separator for stable, dendrite-free operation of lithium-metal batteries. A unique polymer multilayer PEI(PAA/PEO)(3) was fabricated on the microporous polyethylene (PE) separator by a simple layer-by-layer (LbL) assembly process, which maintains the pore structure and thickness of PE separator but remarkably enhances the ionic conductivity (from 0.36 mS cm(-1) to 0.45 mS cm(-1)) and Li+ transference number (from 0.37 to 0.48), as well as stabilizes lithium metal anodes against the reaction with liquid electrolytes during storage and repeated charge/discharge cycles, which is responsible for restraining the electrode polarization and the formation of lithium dendrites, and therefore endows lithium metal batteries with long-term cycling at high columbic efficiency and excellent rate capability, as well as the improved safety.
|
|
| 3. |
- Klionsky, Daniel J., et al.
(author)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
In: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Research review (peer-reviewed)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
| 4. |
- Wang, Yanan, et al.
(author)
-
Gel Polymer Electrolyte with High Li+ Transference Number Enhancing the Cycling Stability of Lithium Anodes
- 2019
-
In: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 11:5, s. 5168-5175
-
Journal article (peer-reviewed)abstract
- Lithium anodes suffer from severe safety problems in liquid electrolyte systems that result from an unstable Li plating/stripping process and Li dendrite growth, leading to rapid degradation of Li metal batteries. A polyethylene (PE)-supported gel polymer electrolyte (GPE) with excellent electrolyte uptake/retention capability was simply prepared in this paper by the construction of cross-linked polymer networks (PNs) on the surface of a poly(ethylenimine)-primed PE separator to stabilize the lithium anode. The highly delocalized negative charge of p-styrene sulfonate groups on PNs plays a role in regulating the Li+ and anion transport, giving rise to a high Li+ transference number. This GPE extended the electrochemical stability to 4.8 V and improved the stability of interface between the electrolyte and lithium metal anode (reduced overpotential and suppressed lithium dendrites) during storage and repeated lithium plating/stripping cycling. The Li metal anode-based battery employing this GPE exhibits excellent cycling stability and C-rate capability.
|
|
| 5. |
- Zhai, Pan, et al.
(author)
-
Ionic Conductive Thermoplastic Polymer Welding Layer for Low Electrode/Solid Electrolyte Interface Resistance
- 2020
-
In: ACS Applied Energy Materials. - : AMER CHEMICAL SOC. - 2574-0962. ; 3:7, s. 7011-7019
-
Journal article (peer-reviewed)abstract
- The application of LAGP ceramic solid electrolytes is circumscribed by the large electrode/electrolyte interfacial resistance because of their rigidity and brittleness. Here, a highly cohesive composite polymer layer consisting of poly(vinylene carbonate)-thermoplastic polyurethanes (PVC-TPU) is coated onto both sides of the Li1.5Al0.5Ge1.5(PO4)(3) pellet to address the interfacial problems with the electrodes. The coated PVC-TPU acts as an ionic conductive welding layer to facilitate the interfacial contact of the LAGP pellet with both electrodes and decreases the interfacial resistance of the LAGP pellet against the cathode (from 1.4 x 10(6) to 3.8 x 10(3) Omega cm(2)) and the Li-metal anode (from 3.3 x 10(4) to 890 Omega cm(2)). The resulting composite solid-state electrolyte (CSSE) presents the synergistic effect of the LAGP ceramic pellet and the PVC-TPU layer in terms of electrochemical stability, ionic transport properties, and stable lithium plating/stripping cycling with a low overpotential for 1000 h. Consequently, the LiFePO4/Li solid-state batteries utilizing this CSSE deliver a high capacity retention of 95.3% after 100 cycles at room temperature with a high Coulombic efficiency exceeding 99.99% per cycle and lithium dendrite inhibition.
|
|
| 6. |
- Zhang, Sulin, et al.
(author)
-
SNX10 (sorting nexin 10) inhibits colorectal cancer initiation and progression by controlling autophagic degradation of SRC
- 2020
-
In: Autophagy. - Philadelphia : Taylor & Francis. - 1554-8627 .- 1554-8635. ; 16:4, s. 735-749
-
Journal article (peer-reviewed)abstract
- The non-receptor tyrosine kinase SRC is a key mediator of cellular protumorigenic signals. SRC is aberrantly over-expressed and activated in more than 80% of colorectal cancer (CRC) patients, therefore regulation of its stability and activity is essential. Here, we report a significant down regulation of SNX10 (sorting nexin 10) in human CRC tissues, which is closely related to tumor differentiation, TNM stage, lymph node metastasis and survival period. SNX10 deficiency in normal and neoplastic colorectal epithelial cells promotes initiation and progression of CRC in mice. SNX10 controls SRC levels by mediating autophagosome-lysosome fusion and SRC recruitment for autophagic degradation. These mechanisms ensure proper controlling of the activities of SRC-STAT3 and SRC-CTNNB1 signaling pathways by up-regulating SNX10 expression under stress conditions. These findings suggest that SNX10 acts as a tumor suppressor in CRC and it could be a potential therapeutic target for future development.Abbreviations: ACTB: actin beta; ATG5: autophagy related 5; ATG12: autophagy related 12; CQ: chloroquine; CRC: colorectal cancer; CTNNB1: catenin beta 1; EBSS: Earle's balanced salt solution; KO: knockout; LAMP1: lysosomal associated membrane protein 1; LAMP2: lysosomal associated membrane protein 2; MAP1LC3: microtubule associated protein 1 light chain 3; MKI67: marker of proliferation Ki-67; mRNA: messenger RNA; PX: phox homology; RT-qPCR: real time quantitative polymerase chain reaction; siRNA: small interfering RNA; SNX10: sorting nexin 10; SQSTM1: sequestosome 1; SRC: SRC proto-oncogene, non-receptor tyrosine kinase; STAT3: signal transducer and activator of transcription 3; WT: wild type. © 2019 Informa UK Limited, trading as Taylor & Francis Group
|
|
