1. |
- Fuente, Raquel, et al.
(author)
-
Development and demonstration of an automated system for limited access weld inspection by using infrared active thermography
- 2015
-
In: Proceedings 7th International Symposium on NDT in Aerospace. - Berlin. ; , s. 1-8
-
Conference paper (peer-reviewed)abstract
- Weld inspection for surface breaking defects detection has been traditionally performed by using NDT methods such as Fluorescent PenetrantInspection (FPI), Visual Inspection (VI) or Eddy Currents (EC). All those well known techniques have as common drawback the need of skilled operator intervention in order to analyse obtained results. In the specific case of inspection of welds with limited access, the application of those traditional methods is even more complex, thus increasing inspection time and reducing the defect detection capability. Therefore, the development of a fully automated non-contact method overcoming these limitations is desired. Active thermography (IRT) represents one of the most promising techniques for replacing traditional techniques for surface breaking defect detection in welds.This technique makes use of an excitation source in order to heat the sample undertest and an infrared camera for thermal evolution monitoring. With the combination of these excitation-monitoring techniques, heterogeneities in the heat flow caused bysurface breaking cracks can be detected. In this work, a robotic solution was developed and demonstrated for the inspection of welds with real cracks in a representative environment with limited access. The system consists of a continuous laser-line excitation source together with a FLIR SC 655 micro bolometer thermographic camera. In order to access limited areas, two different aluminium polished mirrors have been used for bothinfrared radiation monitoring and laser excitation respectively. The inspection results, analysis and comparison with traditional methods will be shown.
|
|
2. |
- Garcia de la Yedra, Aitor, et al.
(author)
-
Defect strategies in Nickel Superalloys weld using active thermography
- 2014
-
In: 12th International Conference on Quantitative InfraRed Thermography, 7-11/7 Bordeaux. ; , s. 1-9
-
Conference paper (peer-reviewed)abstract
- As a result of extreme operation conditions in gas turbines, high resistance materials with excellent behaviour at high temperature are required. Alloys, such as MarM-247 nickel based superalloy, with excellent mechanical properties at very high temperature (even at 85 % of their melting point) are being used in these applications. This extraordinary behaviour is mainly due to the presence of a strengthening phase (γ’) with the following chemical composition: Ni3(Al, Ti). However, during welding these materials are susceptible to cracking and this is why weld inspections become crucial. In this work different strategies for defect detection in welds are introduced, all of them based on active thermography. The work covers aspects such as different excitation and data evaluation strategies.
|
|
3. |
- García, Yedra, et al.
(author)
-
Addition of nocturnal pollinators modifies the structure of pollination networks
- 2024
-
In: Scientific Reports. - 2045-2322. ; 14
-
Journal article (peer-reviewed)abstract
- Although the ecological network approach has substantially contributed to the study of plant-pollinator interactions, current understanding of their functional structure is biased towards diurnal pollinators. Nocturnal pollinators have been systematically ignored despite the publication of several studies that have tried to alleviate this diurnal bias. Here, we explored whether adding this neglected group of pollinators had a relevant effect on the overall architecture of three high mountain plant-pollinator networks. Including nocturnal moth pollinators modified network properties by decreasing total connectivity, connectance, nestedness and robustness to plant extinction; and increasing web asymmetry and modularity. Nocturnal moths were not preferentially connected to the most linked plants of the networks, and they were grouped into a specific “night” module in only one of the three networks. Our results indicate that ignoring the nocturnal component of plant-pollinator networks may cause changes in network properties different from those expected from random undersampling of diurnal pollinators. Consequently, the neglect of nocturnal interactions may provide a distorted view of the structure of plant-pollinator networks with relevant implications for conservation assessments.
|
|
4. |
- Garcia, Yedra, et al.
(author)
-
Floral scent divergence across an elevational hybrid zone with varying pollinators
- 2023
-
In: Oecologia. - : Springer Nature. - 0029-8549 .- 1432-1939. ; 201:1, s. 45-57
-
Journal article (peer-reviewed)abstract
- Divergence in floral traits attractive to different pollinators can promote reproductive isolation in related species. When isolation is incomplete, hybridization may occur, which offers the opportunity to explore mechanisms underlying reproductive isolation. Recent work suggests that divergence in floral scent may frequently contribute to reproductive barriers, although such divergence has seldom been examined in species with generalized pollination. Here, we used two closely related Penstemon species, P. newberryi and P. davidsonii, and their natural hybrids from an elevational gradient with pollinator communities that are predicted to vary in their reliance on floral scent (i.e., primarily hummingbirds at low elevation vs. bees at high elevation). The species vary in a suite of floral traits, but scent is uncharacterized. To address whether scent varies along elevation and potentially contributes to reproductive isolation, we genetically characterized individuals collected at field and identified whether they were parental species or hybrids. We then characterized scent amount and composition. Although the parental species had similar total emissions, some scent characteristics (i.e., scent composition, aromatic emission) diverged between them and may contribute to their isolation. However, the species emitted similar compound sets which could explain hybridization in the contact area. Hybrids were similar to the parents for most scent traits, suggesting that their floral scent would not provide a strong barrier to backcrossing. Our study suggests floral scent may be a trait contributing to species boundaries even in plants with generalized pollination, and reinforces the idea that evolutionary pollinator transitions may involve changes in multiple floral traits.
|
|
5. |
- Garcia, Yedra, et al.
(author)
-
Spatial variation in scent emission within flowers
- 2021
-
In: Nordic Journal of Botany. - : John Wiley & Sons. - 0107-055X .- 1756-1051. ; 39:7
-
Journal article (peer-reviewed)abstract
- Floral scent is considered an important long-distance signal that attracts pollinators, but also has been suggested to function at shorter distances such as within-flower nectar guides or as a defense against antagonists. Indeed, in some species floral scent production and emission show spatial patterns of variation within flowers, as certain compounds are exclusively emitted from specific floral tissues. In other species, the different volatile organic compounds that constitute the floral bouquet are emitted evenly from the entire flower. Here, we summarize the current evidence on floral scent variation within flowers by combining a literature review of published data on tissue-level floral scent variation (41 species) with floral scent dissections (17 species). For each species, we recorded the total number of volatile compounds separately and grouped in major chemical classes. To facilitate comparisons across diverse species, we compared volatiles emitted by 1) the whole flower, 2) the visual floral tissues (i.e. petals and colored structures), 3) non-visual floral tissues (i.e. green parts and reproductive structures), as well as 4) the compounds emitted by both visual and non-visual tissues. Results show that floral scent variation is frequent, but by no means ubiquitous, occurring in species from distantly related groups. We discuss the two main functional hypotheses promoting floral scent variation within flowers, i.e. as a pollinator attractant at short-distances or a defensive function against antagonists, together with non-functional hypotheses (e.g. pleiotropic effects, ecological costs). We point out further directions on this topic and suggest experimental approaches testing the attractiveness of compounds emitted by different floral parts alone and in combination with other floral signals. Our synthesis provides a foundation for future studies on the functional ecology of floral scent and reinforces the idea of high complexity in floral chemical signals.
|
|
6. |
- García, Yedra, et al.
(author)
-
Water deficit changes patterns of selection on floral signals and nectar rewards in the common morning glory
- 2023
-
In: AoB Plants. - 2041-2851. ; 15:5
-
Journal article (peer-reviewed)abstract
- Understanding whether and how resource limitation alters phenotypic selection on floral traits is key to predict the evolution of plant-pollinator interactions under climate change. Two important resources predicted to decline with our changing climate are pollinators and water in the form of increased droughts. Most work, however, has studied these selective agents separately and in the case of water deficit, studies are rare. Here, we use the common morning glory (Ipomoea purpurea) to investigate the effects of experimental reduction in pollinator access and water availability on floral signals and nectar rewards and their effects on phenotypic selection on these traits. We conducted a manipulative experiment in a common garden, where we grew plants in three treatments: (1) pollinator restriction, (2) water reduction and (3) unmanipulated control. Plants in pollinator restriction and control treatments were well-watered compared to water deficit. We found that in contrast to pollinator restriction, water deficit had strong effects altering floral signals and nectar rewards but also differed in the direction and strength of selection on these traits compared to control plants. Water deficit increased the opportunity for selection, and selection in this treatment favoured lower nectar volumes and larger floral sizes, which might further alter pollinator visitation. In addition, well-watered plants, both in control and pollinator deficit, showed similar patterns of selection to increase nectar volume suggesting non-pollinator-mediated selection on nectar. Our study shows that floral traits may evolve in response to reduction in water access faster than to declines in pollinators and reinforces that abiotic factors can be important agents of selection for floral traits. Although only few experimental selection studies have manipulated access to biotic and abiotic resources, our results suggest that this approach is key for understanding how pollination systems may evolve under climate change.
|
|
7. |
- Runnemalm, Anna, 1970-, et al.
(author)
-
Automated inspection of welds with limited access by use of active thermography with laser line excitation
- 2016
-
Conference paper (peer-reviewed)abstract
- Inspection of welds for detecting surface breaking defects is traditionally performed by using NDT methods such as Fluorescent Penetrant Inspection, Visual Inspection or Eddy Current. All those well-known techniques have drawbacks, as they need access to the surface, either for preparation with e.g. liquids or for using contact probes. Traditional methods also require a skilled operator to carry out the inspection, and moreover to analyse the obtained results. Furthermore, for the inspection of welds with limited access, the use of those traditional methods is even more complex, resulting in increased inspection time and reduced detection capability or in worst case, areas impossible to inspect. Therefore, the development of a fully automated non-contact method overcoming these limitations is desired. ;Active thermography is a novel NDT technique for weld inspection. The method has shown promising results for replacing traditional techniques when it comes to detection of surface breaking defects in metals. The method make use of an excitation source in order to heat the sample in a controlled manner during the test, and an infrared thermal camera for recordings of the thermal evolution. ;In this work, an automated solution developed and demonstrated for inspection of welds in a jet-engine component with limited access is presented. The NDT system is mounted on an industrial robot, making it possible to automatic scan the inspected area. The system consists of a, continuous laser-line excitation source together with a FLIR SC 655 microbolometer thermographic camera. In order to access limited areas, two polished aluminium mirrors have been used for both infrared radiation monitoring and laser excitation respectively. A solution for automatic analysing, defect detection and sizing is also included and presented.
|
|
8. |
- Runnemalm, Anna, 1970-, et al.
(author)
-
Automatic thermography inspection of welded components with limited access
- 2014
-
In: Proceedings of 6th International Symposium on NDT in Aerospace, 12-14th November 2014, Madrid, Spain. ; , s. 1-10
-
Conference paper (peer-reviewed)abstract
- Inspection of welds with limited access puts specific requirement on the NDT-method to be used. A non-contact method without the need for special surface preparation is preferable for fast and cost efficient inspection and with the possibility of automation. Infrared thermography has been known for quite a long time and is today mainly used for NDT inspection of composite structures. The technique is based on registering the heat conduction of the material of the surface of the structure. The method requires some kind of excitation resulting in a change of heat locally in the inspected area. In the study presented in this paper, different excitation methods are evaluated, such as continuous laser, flash lamp and induction. The study also includes conditions for miniaturization andautomation of the inspection methods. For welds difficult to access, thermography is a suggested as a possible inspection method.
|
|