1. |
- Santangelo, James S., et al.
(author)
-
Global urban environmental change drives adaptation in white clover
- 2022
-
In: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 375
-
Journal article (peer-reviewed)abstract
- Urbanization transforms environments in ways that alter biological evolution. We examined whether urban environmental change drives parallel evolution by sampling 110,019 white clover plants from 6169 populations in 160 cities globally. Plants were assayed for a Mendelian antiherbivore defense that also affects tolerance to abiotic stressors. Urban-rural gradients were associated with the evolution of clines in defense in 47% of cities throughout the world. Variation in the strength of clines was explained by environmental changes in drought stress and vegetation cover that varied among cities. Sequencing 2074 genomes from 26 cities revealed that the evolution of urban-rural dines was best explained by adaptive evolution, but the degree of parallel adaptation varied among cities. Our results demonstrate that urbanization leads to adaptation at a global scale.
|
|
2. |
|
|
3. |
- de Mattos, I L, et al.
(author)
-
Evaluation of glucose biosensors based on Prussian Blue and lyophilised, crystalline and cross-linked glucose oxidases (CLEC(R)).
- 2001
-
In: Talanta. - 1873-3573. ; 54:5, s. 963-974
-
Journal article (peer-reviewed)abstract
- Glucose biosensors based on lyophilised, crystalline and cross-linked glucose oxidase (GOx, CLEC(R)) and commercially available lyophilised GOx immobilised on top of glassy carbon electrodes modified with electrodeposited Prussian Blue are critically compared. Two procedures were carried out for preparing the biosensors: (1) deposition of one layer of adsorbed GOx dissolved in an aqueous solution followed by deposition of two layers of low molecular weight Nafion(R) dissolved in 90% ethanol, and (2) deposition of two layers of a mixture of GOx with Nafion dissolved in 90% ethanol. The performance of the biosensors was evaluated in terms of linear response range for hydrogen peroxide and glucose, detection limit, and susceptibility to some common interfering species (ascorbic acid, acetaminophen and uric acid). The operational stability of the biosensors was evaluated by applying a steady potential of -50 mV versus Ag/AgCl to the glucose biosensor and injecting standard solutions of hydrogen peroxide and glucose (50 muM and 1.0 mM, respectively, in phosphate buffer) for at least 5 h in a flow-injection system. Scanning electron microscopy was used for visualisation of the Prussian Blue redox catalyst and in the presence of the different GOx preparations on the electrode surface.
|
|
4. |
- Ignatenko, O. V., et al.
(author)
-
Electrochemistry of chemically trapped dimeric and monomeric recombinant horseradish peroxidase
- 2013
-
In: Advances in Biosensors and Bioelectronics. - : Science and Engineering Publishing Company. - 2326-473X. ; 2:3, s. 25-34
-
Journal article (peer-reviewed)abstract
- Native horseradish peroxidase (nHRP) exists in the aggregated form in concentrated water solutions as shown by dynamic light scattering (DLS). This is in contrast to recombinant horseradish peroxidase (recHRP) which mainly exists as a dimer. The native enzyme aggregates could be broken into the particles of nm-size only under the conditions of high ionic strength (0.5-1 M NaCl). Chemical cross-linking of recHRP with glutaraldehyde in water solutions yields 40% of the dimer. The chemically trapped dimeric and monomeric forms of recHRP were separated by gel-filtration, their substrate specificity towards a number of organic substrates compared. Parameters of direct and mediated electron transfer on graphite electrodes catalyzed by both preparations were analyzed. The difference in behavior of the monomeric and dimeric enzyme forms observed in electrochemical experiments was interpreted as a result of a “double” coverage of the electrode surface with the molecules of cross-linked dimeric enzyme, in contrast to both modified monomeric and original, unmodified recHRP providing “monolayer” coverage. In addition to the stabilization effects achieved due to enzyme surface modification with glutaraldehyde, the “double” coverage doubles the enzyme activity per surface unit.
|
|
5. |
|
|
6. |
|
|
7. |
- Abad, JM, et al.
(author)
-
Immobilization of peroxidase glycoprotein on gold electrodes modified with mixed epoxy-boronic acid monolayers
- 2002
-
In: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 1520-5126 .- 0002-7863. ; 124:43, s. 12845-12853
-
Research review (peer-reviewed)abstract
- The development of bioelectronic enzyme applications requires the immobilization of active proteins onto solid or colloidal substrates such as gold. Coverage of the gold surface with alkanethiol self-assembled monolayers (SAMS) reduces nonspecific adsorption of proteins and also allows the incorporation onto the surface of ligands with affinity for complementary binding sites on native proteins. We present in this work a strategy for the covalent immobilization of glycosylated proteins previously adsorbed through weak, reversible interactions, on tailored SAMS. Boronic acids, which form cyclic esters with saccharides, are incorporated into SAMS to weakly adsorb the glycoprotein onto the electrode surface through their carbohydrate moiety. To prevent protein release from the electrode surface, we combine the affinity motif of boronates with the reactivity of epoxy groups to covalently link the protein to heterofunctional boronateepoxy SAMS. The principle underlying our strategy is the increased immobilization rate achieved by the weak interaction-induced proximity effect between slow reacting oxyrane groups in the SAM and nucleophilic residues from adsorbed proteins, which allows the formation of very stable covalent bonds. This approach is exemplified by the use of phenylboronates-oxyrane mixed monolayers as a reactive support and redox-enzyme horseradish peroxidase as glycoprotein for the preparation of peroxidase electrodes. Quartz crystal microbalance, atomic force microscopy, and electrochemical measurements are used to characterize these enzymatic electrodes. These epoxy-boronate functional monolayers; are versatile, stable interfaces, ready to incorporate glycoproteins by incubation under mild conditions.
|
|
8. |
- Bollella, Paolo, et al.
(author)
-
Improved DET communication between cellobiose dehydrogenase and a gold electrode modified with a rigid self-assembled monolayer and green metal nanoparticles : The role of an ordered nanostructuration
- 2017
-
In: Biosensors and Bioelectronics. - : Elsevier BV. - 0956-5663. ; 88, s. 196-203
-
Journal article (peer-reviewed)abstract
- Efficient direct electron transfer (DET) between cellobiose dehydrogenase from Corynascus thermophilus (CtCDH) and a novel gold electrode platform, obtained by covalent linking of green AuNPs and AgNPs modified with a dithiol self-assembled monolayer, consisting of biphenyl-4,4′-dithiol (BPDT), was presented. The green AuNPs and AgNPs were synthesized using quercetin as reducing agent at room temperature. TEM experiments showed that the AuNPs and AgNPs were circular in shape with an average diameter of 5 and 8 nm, respectively. Cyclic voltammetry of CtCDH immobilized onto the AuNPs/BPDT/AuE and the AgNPs/BPDT/AuE electrode platforms were carried out and compared with naked AuE, BPDT/AuE, AuNPs/AuE, and AgNPs/AuE. A pair of well-defined redox waves in neutral pH solution due to efficient DET of CtCDH was present with both MNPs/BPDT/AuE platforms. No DET communication was found with platforms without MNPs linked to BPDT. The apparent heterogeneous electron transfer rate constants (kS) of CtCDH were calculated to be 21.5±0.8 s−1 and 10.3±0.7 s−1, for the AuNPs/BPDT/AuE and the AgNPs/BPDT/AuE platforms, respectively. The modified electrodes were successively used to develop an eco-friendly biosensor for lactose detection. The CtCDH/AuNPs/BPDT/AuE based biosensor showed the best analytical performances with an excellent stability, a detection limit of 3 µM, a linear range between 5 and 400 µM and a sensitivity of 27.5±2.5 µA cm−2 mM−1. Such performances were favorably compared with other lactose biosensors reported in literature. The biosensor was successively tested to quantify lactose content in real milk and cream samples. No significant interference present in the sample matrices was observed.
|
|
9. |
- Burestedt, E., et al.
(author)
-
Optimisation and validation of an automated solid phase extraction technique coupled on-line to enzyme-based biosensor detection for the determination of phenolic compounds in surface water samples
- 1995
-
In: Chromatographia. - Heidelberg : Springer Berlin/Heidelberg. - 0009-5893 .- 1612-1112. ; 41:3-4, s. 207-215
-
Journal article (peer-reviewed)abstract
- A fully integrated screening system for phenolic compounds was developed incorporating on-line solid phase extraction, fractionation and biosensor detection. Two different types of biosensors, solid graphite and carbon paste electrodes incorporating the enzyme tyrosinase, were compared and used in the screening system. Interfacing of the solid phase extraction and fractionation with the biosensor detection was given special attention since the biosensors were not compatible with the organic modifier used for desorption of phenols from the solid phase extraction step. The system was validated with conventional analytical techniques. Surface water samples from the Ebro river were spiked with 1,10, and 25μg L−1 of catechol, phenol,p-cresol, respectively. Three out of seven samples were spiked and the correct samples were identified, containing phenols equivalent to the spiked concentrations. © 1995 Friedr. Vieweg & Sohn Verlagsgesellschaft mbH.
|
|
10. |
- Christenson, Andreas, et al.
(author)
-
Direct electron transfer between ligninolytic redox enzymes and electrodes
- 2004
-
In: Electroanalysis. - : Wiley. - 1040-0397 .- 1521-4109. ; 16:13-14, s. 1074-1092
-
Research review (peer-reviewed)abstract
- The electrochemistry of the ligninolytic redox enzymes, which include lignin peroxidase, manganese peroxidase and laccase and possibly also cellobiose dehydrogenase, is reviewed and discussed in conjunction with their basic biochemical characteristics. It is shown that long-range electron transfer between these enzymes and electrodes can be established and their ability to degrade lignin through a direct electron transfer mechanism is discussed.
|
|