| 1. |
- Babusiaux, C., et al.
(author)
-
Observational Hertzsprung-Russell diagrams
- 2018
-
In: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 616
-
Journal article (peer-reviewed)abstract
- Context. Gaia Data Release 2 provides high-precision astrometry and three-band photometry for about 1.3 billion sources over the full sky. The precision, accuracy, and homogeneity of both astrometry and photometry are unprecedented. Aims. We highlight the power of the Gaia DR2 in studying many fine structures of the Hertzsprung-Russell diagram (HRD). Gaia allows us to present many different HRDs, depending in particular on stellar population selections. We do not aim here for completeness in terms of types of stars or stellar evolutionary aspects. Instead, we have chosen several illustrative examples. Methods. We describe some of the selections that can be made in Gaia DR2 to highlight the main structures of the Gaia HRDs. We select both field and cluster (open and globular) stars, compare the observations with previous classifications and with stellar evolutionary tracks, and we present variations of the Gaia HRD with age, metallicity, and kinematics. Late stages of stellar evolution such as hot subdwarfs, post-AGB stars, planetary nebulae, and white dwarfs are also analysed, as well as low-mass brown dwarf objects. Results. The Gaia HRDs are unprecedented in both precision and coverage of the various Milky Way stellar populations and stellar evolutionary phases. Many fine structures of the HRDs are presented. The clear split of the white dwarf sequence into hydrogen and helium white dwarfs is presented for the first time in an HRD. The relation between kinematics and the HRD is nicely illustrated. Two different populations in a classical kinematic selection of the halo are unambiguously identified in the HRD. Membership and mean parameters for a selected list of open clusters are provided. They allow drawing very detailed cluster sequences, highlighting fine structures, and providing extremely precise empirical isochrones that will lead to more insight in stellar physics. Conclusions. Gaia DR2 demonstrates the potential of combining precise astrometry and photometry for large samples for studies in stellar evolution and stellar population and opens an entire new area for HRD-based studies.
|
|
| 2. |
- Helmi, A., et al.
(author)
-
Gaia Data Release 2 Kinematics of globular clusters and dwarf galaxies around the Milky Way
- 2018
-
In: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 616:A12
-
Journal article (peer-reviewed)abstract
- Aims The goal of this paper is to demonstrate the outstanding quality of the second data release of the Gaia mission and its power for constraining many different aspects of the dynamics of the satellites of the Milky Way. We focus here on determining the proper motions of 75 Galactic globular clusters, nine dwarf spheroidal galaxies, one ultra-faint system, and the Large and Small Magellanic Clouds.Methods Using data extracted from the Gaia archive, we derived the proper motions and parallaxes for these systems, as well as their uncertainties. We demonstrate that the errors, statistical and systematic, are relatively well understood. We integrated the orbits of these objects in three different Galactic potentials, and characterised their properties. We present the derived proper motions, space velocities, and characteristic orbital parameters in various tables to facilitate their use by the astronomical community.Results Our limited and straightforward analyses have allowed us for example to (i) determine absolute and very precise proper motions for globular clusters; (ii) detect clear rotation signatures in the proper motions of at least five globular clusters; (iii) show that the satellites of the Milky Way are all on high-inclination orbits, but that they do not share a single plane of motion; (i v) derive a lower limit for the mass of the Milky Way of 9.1(-2.6)(+6.2) x 10(11) M-circle dot based on the assumption that the Leo I dwarf spheroidal is bound; (v) derive a rotation curve for the Large Magellanic Cloud based solely on proper motions that is competitive with line-of-sight velocity curves, now using many orders of magnitude more sources; and (v i) unveil the dynamical effect of the bar on the motions of stars in the Large Magellanic Cloud.Conclusions All these results highlight the incredible power of the Gaia astrometric mission, and in particular of its second data release.
|
|
| 3. |
- Katz, D., et al.
(author)
-
Gaia Data Release 2 Mapping the Milky Way disc kinematics
- 2018
-
In: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 616
-
Journal article (peer-reviewed)abstract
- Context. The second Gaia data release (Gaia DR2) contains high-precision positions, parallaxes, and proper motions for 1.3 billion sources as well as line-of-sight velocities for 7.2 million stars brighter than G(RVS) = 12 mag. Both samples provide a full sky coverage. Aims. To illustrate the potential of Gaia DR2, we provide a first look at the kinematics of the Milky Way disc, within a radius of several kiloparsecs around the Sun. Methods. We benefit for the first time from a sample of 6.4 million F-G-K stars with full 6D phase-space coordinates, precise parallaxes (sigma((omega) over bar)/(omega) over bar <= 20%), and precise Galactic cylindrical velocities (median uncertainties of 0.9-1.4 km s(-1) and 20% of the stars with uncertainties smaller than 1 km s(-1) on all three components). From this sample, we extracted a sub-sample of 3.2 million giant stars to map the velocity field of the Galactic disc from similar to 5 kpc to similar to 13 kpc from the Galactic centre and up to 2 kpc above and below the plane. We also study the distribution of 0.3 million solar neighbourhood stars (r < 200 pc), with median velocity uncertainties of 0.4 km s(-1), in velocity space and use the full sample to examine how the over-densities evolve in more distant regions. Results. Gaia DR2 allows us to draw 3D maps of the Galactocentric median velocities and velocity dispersions with unprecedented accuracy, precision, and spatial resolution. The maps show the complexity and richness of the velocity field of the galactic disc. We observe streaming motions in all the components of the velocities as well as patterns in the velocity dispersions. For example, we confirm the previously reported negative and positive galactocentric radial velocity gradients in the inner and outer disc, respectively. Here, we see them as part of a non-axisymmetric kinematic oscillation, and we map its azimuthal and vertical behaviour. We also witness a new global arrangement of stars in the velocity plane of the solar neighbourhood and in distant regions in which stars are organised in thin substructures with the shape of circular arches that are oriented approximately along the horizontal direction in the U - V plane. Moreover, in distant regions, we see variations in the velocity substructures more clearly than ever before, in particular, variations in the velocity of the Hercules stream. Conclusions. Gaia DR2 provides the largest existing full 6D phase-space coordinates catalogue. It also vastly increases the number of available distances and transverse velocities with respect to Gaia DR1. Gaia DR2 offers a great wealth of information on the Milky Way and reveals clear non-axisymmetric kinematic signatures within the Galactic disc, for instance. It is now up to the astronomical community to explore its full potential.
|
|
| 4. |
- Mignard, F., et al.
(author)
-
Gaia Data Release 2 The celestial reference frame (Gaia-CRF2)
- 2018
-
In: Astronomy and Astrophysics. - : EDP SCIENCES S A. - 0004-6361 .- 1432-0746. ; 616
-
Journal article (peer-reviewed)abstract
- Context: The second release of Gaia data (Gaia DR2) contains the astrometric parameters for more than half a million quasars. This set defines a kinematically non-rotating reference frame in the optical domain. A subset of these quasars have accurate VLBI positions that allow the axes of the reference frame to be aligned with the International Celestial Reference System (ICRF) radio frame.Aims: We describe the astrometric and photometric properties of the quasars that were selected to represent the celestial reference frame of Gaia DR2 (Gaia-CRF2), and to compare the optical and radio positions for sources with accurate VLBI positions.Methods: Descriptive statistics are used to characterise the overall properties of the quasar sample. Residual rotation and orientation errors and large-scale systematics are quantified by means of expansions in vector spherical harmonics. Positional differences are calculated relative to a prototype version of the forthcoming ICRF3.Results: Gaia-CRF2 consists of the positions of a sample of 556 869 sources in Gaia DR2, obtained from a positional cross-match with the ICRF3-prototype and AllWISE AGN catalogues. The sample constitutes a clean, dense, and homogeneous set of extragalactic point sources in the magnitude range G similar or equal to 16 to 21 mag with accurately known optical positions. The median positional uncertainty is 0.12 mas for G < 18 mag and 0.5 mas at G = 20 mag. Large-scale systematics are estimated to be in the range 20 to 30 mu as. The accuracy claims are supported by the parallaxes and proper motions of the quasars in Gaia DR2. The optical positions for a subset of 2820 sources in common with the ICRF3-prototype show very good overall agreement with the radio positions, but several tens of sources have significantly discrepant positions.Conclusions: Based on less than 40% of the data expected from the nominal Gaia mission, Gaia-CRF2 is the first realisation of a non-rotating global optical reference frame that meets the ICRS prescriptions, meaning that it is built only on extragalactic sources. Its accuracy matches the current radio frame of the ICRF, but the density of sources in all parts of the sky is much higher, except along the Galactic equator.
|
|
| 5. |
|
|
| 6. |
- Anthony, Niklas, et al.
(author)
-
Laboratory experiments with a laser-based attachment mechanism for spacecraft at small bodies
- 2021
-
In: Acta Astronautica. - : Elsevier. - 0094-5765 .- 1879-2030. ; 189, s. 391-397
-
Journal article (peer-reviewed)abstract
- We present the results of two sets of experiments that investigate laser-based metal-to-rock attachment techniques. Asteroids and comets have low surface gravity which pose a challenge to landers with moving parts. Such parts can generate torques and forces which may tip the lander over or launch it into deep space. Thus, if a lander on a small body is to have moving parts, the spacecraft must be equipped with an anchoring mechanism. To this end, we sought to use a laser to melt and bind a piece of metal mimicking a part of a spacecraft to a rock mimicking the surface of a typical asteroid. In the first set of experiments, extra material was not fed in during the processing. The second set were performed using a standard wire feeder used in laser welding, which added metal to the experiment during processing. During the first experiments, we discovered that a traditional weld, where two melt pools mix and solidify to form a strong bond, was not possible—the melt pools would not mix, and when they did, the resulting weld was extremely brittle. The second set of experiments resulted in a physico-mechanical bond, where a hole was drilled with a laser, and a wire was melted and fed into the hole. These latter experiments were successful in forming bonds as strong as 115 N. Such an attachment mechanism can also be used to maneuver small boulders on asteroid surfaces, to redirect small, monolithic asteroids, or in space-debris removal.
|
|
| 7. |
- Anthony, Niklas, et al.
(author)
-
Laser-induced spallation of minerals common on asteroids
- 2021
-
In: Acta Astronautica. - : Elsevier. - 0094-5765 .- 1879-2030. ; 182, s. 325-331
-
Journal article (peer-reviewed)abstract
- The ability to deflect dangerous small bodies in the Solar System or redirect profitable ones is a necessary and worthwhile challenge. One well-studied method to accomplish this is laser ablation, where solid surface material sublimates, and the escaping gas creates a momentum exchange. Alternatively, laser-induced spallation and sputtering could be a more efficient means of deflection, yet little research has studied these processes in detail. We used a 15-kW Ytterbium fiber laser on samples of olivine, pyroxene, and serpentine (minerals commonly found on asteroids) to induce spallation. We observed the process with a high-speed camera and illumination laser, and used X-ray micro-tomography to measure the size of the holes produced by the laser to determine material removal efficiency. We found that pyroxene will spallate at power densities between 1.5 and 6.0 kW cm−2, serpentine will also spallate at 13.7 kW cm−2, but olivine does not spallate at 1.5 kW cm−2 and higher power densities melt the sample. Laser-induced spallation of pyroxene and serpentine can be two- to three-times more energy efficient (volume removed per unit of absorbed energy) than laser-induced spattering, and over 40x more efficient than laser ablation.
|
|
| 8. |
- Anthony, Niklas
(author)
-
Laser Interaction with Minerals Common on Asteroids
- 2021
-
Doctoral thesis (other academic/artistic)abstract
- Asteroids are worth studying for three reasons: planetary protection, industrial applications, and scientific knowledge. It is critical we develop technologies capable of diverting objects on collision courses with our planet. We can use the same technology to move or process asteroids and comets for materials to build structures or refuel in Low-Earth Orbit. Asteroids are also windows into the past; they were formed in the early Solar System, and could potentially have been the source of water and/or life on Earth. There are unique challenges to manipulating an asteroid or asteroid materials, which means that much of what we know about material processing needs to be revamped to fit the situation. One of the motivating drives of this research was that a laser would be an excellent tool to perform many tasks at an asteroid.One process of interest is laser drilling. The surface composition of asteroids is altered by aeons of space weathering; by studying the subsurface composition we can ascertain just how much it is altered and possibly by which processes. It is possible that hydrated minerals or ices exist below the surface as well, which are of great economic interest in asteroid mining. One of the greatest challenges to get under the surface of an asteroid is the low gravity: any forces or torques generated by a sampling mechanism may tip the spacecraft or launch it into deep space. A laser does not generate any significant forces, and can even be used without having to land; lasers do use a lot of electric power so the laser parameters need to be optimized to minimize the size and power requirements of the spacecraft. We found that nearly 1-cm deep holes can be made with as little as 18~J of energy using a 300-W laser.Laser ablation has been studied as a mechanism to redirect asteroids, but it is not particularly energy efficient at material removal. If the idea is to create a momentum exchange by removing surface material beyond an object's gravitational pull, then there could perhaps be more energy efficient mechanisms. One mechanism we investigated was spallation, where the shock wave of a laser pulse breaks off a relatively large chunk of material without having to melt and vaporize it. We found that spallation may be many times more energy efficient than ablation.Laser welding of metals has been of industrial interest for decades, though the welding of two different materials is still a challenge. We sought to develop a laser-based wire-attachment mechanism that can be used to anchor spacecraft to the surface of a small body or to maneuver boulders or small asteroids. When attempting to follow a traditional welding process, it was found that the two melt pools would not mix, and if it did, it was very weak. Instead, we used the laser to drill a hole and melt a wire while inserting it into the hole. This produced a solid anchor with a hold strength of up to 120~N.
|
|
| 9. |
- Anthony, Niklas, et al.
(author)
-
Laser processing of minerals common on asteroids
- 2021
-
In: Optics and Laser Technology. - : Elsevier. - 0030-3992 .- 1879-2545. ; 135
-
Journal article (peer-reviewed)abstract
- Asteroid mining and redirection are two trends that both can utilize lasers, one to drill and cut, the other to ablate and move. Yet little is known about what happens when a laser is used to process the types of materials we typically expect to find on most asteroids. To shed light on laser processing of asteroid material, we used a 300-W, pulsed Ytterbium fiber laser on samples of olivine, pyroxene, and serpentine, and studied the process with a high-speed camera and illumination laser at 10 000 frames per second. We also measure the sizes of the resulting holes using X-ray micro-tomography to find the pulse parameters which remove the largest amount of material using the least amount of energy. We find that at these power densities, all three minerals will melt and chaotically throw off spatter. Short, low-power pulses can efficiently produce thin, deep holes, and long, high-power pulses are more energy efficient at removing the most amount of material.
|
|
| 10. |
- Antoja, T., et al.
(author)
-
Gaia Early Data Release 3: The Galactic anticentre
- 2021
-
In: Astronomy and Astrophysics. - : EDP Sciences. - 1432-0746 .- 0004-6361. ; 649
-
Journal article (peer-reviewed)abstract
- Aims. We aim to demonstrate the scientific potential of the Gaia Early Data Release 3 (EDR3) for the study of different aspects of the Milky Way structure and evolution and we provide, at the same time, a description of several practical aspects of the data and examples of their usage. Methods. We used astrometric positions, proper motions, parallaxes, and photometry from EDR3 to select different populations and components and to calculate the distances and velocities in the direction of the anticentre. In this direction, the Gaia astrometric data alone enable the calculation of the vertical and azimuthal velocities; also, the extinction is relatively low compared to other directions in the Galactic plane. We then explore the disturbances of the current disc, the spatial and kinematical distributions of early accreted versus in situ stars, the structures in the outer parts of the disc, and the orbits of open clusters Berkeley 29 and Saurer 1. Results. With the improved astrometry and photometry of EDR3, we find that: (i) the dynamics of the Galactic disc are very complex with oscillations in the median rotation and vertical velocities as a function of radius, vertical asymmetries, and new correlations, including a bimodality with disc stars with large angular momentum moving vertically upwards from below the plane, and disc stars with slightly lower angular momentum moving preferentially downwards; (ii) we resolve the kinematic substructure (diagonal ridges) in the outer parts of the disc for the first time; (iii) the red sequence that has been associated with the proto-Galactic disc that was present at the time of the merger with Gaia-Enceladus-Sausage is currently radially concentrated up to around 14 kpc, while the blue sequence that has been associated with debris of the satellite extends beyond that; (iv) there are density structures in the outer disc, both above and below the plane, most probably related to Monoceros, the Anticentre Stream, and TriAnd, for which the Gaia data allow an exhaustive selection of candidate member stars and dynamical study; and (v) the open clusters Berkeley 29 and Saurer 1, despite being located at large distances from the Galactic centre, are on nearly circular disc-like orbits. Conclusions. Even with our simple preliminary exploration of the Gaia EDR3, we demonstrate how, once again, these data from the European Space Agency are crucial for our understanding of the different pieces of our Galaxy and their connection to its global structure and history. © ESO 2021.
|
|
