1. |
- Schoch, CL, et al.
(author)
-
Nuclear ribosomal internal transcribed spacer (ITS) region as a universal DNA barcode marker for Fungi
- 2012
-
In: Proceedings of the National Academy of Sciences of the United States of America. - : Proceedings of the National Academy of Sciences. - 1091-6490. ; 109:16, s. 6241-6246
-
Journal article (peer-reviewed)abstract
- Six DNA regions were evaluated as potential DNA barcodes for Fungi, the second largest kingdom of eukaryotic life, by a multinational, multilaboratory consortium. The region of the mitochondrial cytochrome c oxidase subunit 1 used as the animal barcode was excluded as a potential marker, because it is difficult to amplify in fungi, often includes large introns, and can be insufficiently variable. Three subunits from the nuclear ribosomal RNA cistron were compared together with regions of three representative protein-coding genes (largest subunit of RNA polymerase II, second largest subunit of RNA polymerase II, and minichromosome maintenance protein). Although the protein-coding gene regions often had a higher percent of correct identification compared with ribosomal markers, low PCR amplification and sequencing success eliminated them as candidates for a universal fungal barcode. Among the regions of the ribosomal cistron, the internal transcribed spacer (ITS) region has the highest probability of successful identification for the broadest range of fungi, with the most clearly defined barcode gap between inter- and intraspecific variation. The nuclear ribosomal large subunit, a popular phylogenetic marker in certain groups, had superior species resolution in some taxonomic groups, such as the early diverging lineages and the ascomycete yeasts, but was otherwise slightly inferior to the ITS. The nuclear ribosomal small subunit has poor species-level resolution in fungi. ITS will be formally proposed for adoption as the primary fungal barcode marker to the Consortium for the Barcode of Life, with the possibility that supplementary barcodes may be developed for particular narrowly circumscribed taxonomic groups.
|
|
2. |
- Bearden, IG, et al.
(author)
-
Particle production in central Pb+Pb collisions at 158A GeV/c
- 2002
-
In: Physical Review C (Nuclear Physics). - 0556-2813. ; 66:4
-
Journal article (peer-reviewed)abstract
- The NA44 experiment has measured single-particle inclusive spectra for charged pions, kaons, and protons as a function of transverse mass near midrapidity in 158A GeV/c Pb+Pb collisions. From the particle mass dependence of the observed m(T) distributions, we are able to deduce a value of about 120 MeV for the temperature at thermal freeze-out. From the observed ratios of the rapidity densities, we find values of the chemical potentials for light and strange quarks and a chemical freeze-out temperature of approximately 140 MeV.
|
|
3. |
- Kopp, C., et al.
(author)
-
Very compact FTTH Diplexer design using advanced wafer level fabrication methods
- 2008
-
In: MICRO-OPTICS 2008. - Strasbourg : SPIE.
-
Conference paper (peer-reviewed)abstract
- FTTH networks require implementing a diplexer at each user termination. According to most of the standards, this diplexer detects a download signal beam at 1.49ÎŒm and emits an upload signal beam at 1.31ÎŒm on the same single mode fibre. Both signals exhibit datarate speed below 2.5Gbps. Today, most of the diplexers are obtained by actively aligning a set of individual optoelectronic components and micro-optics. However, new manufacturing solutions satisfying very low cost and mass production capability requirements of this market would help to speed the massive spreading of this technology. In this paper, we present an original packaging design to manufacture Diplexer Optical Sub-Assembly for FTTH application. A dual photodiode is stacked over a VCSEL and detects both the download signal beam at 1.49ÎŒm passing through the laser and one part of the upload signal beam at 1.31ÎŒm for monitoring. To satisfy this approach, an innovative VCSEL has been designed to have a very high transmission at 1.49ÎŒm. All these components are mounted on a very small circuit board on glass including also integrated circuits such as transimpedance amplifier. So, the device combines advanced optoelectronic components and highly integrated Multi-Chip-Module on glass approach using collective wafer-level assembling technologies. For the single mode fibre optical coupling, active and passive alignment solutions are considered.
|
|
4. |
- Schoch, Conrad L., et al.
(author)
-
Finding needles in haystacks: linking scientific names, reference specimens and molecular data for Fungi
- 2014
-
In: Database: The Journal of Biological Databases and Curation. - : Oxford University Press (OUP). - 1758-0463. ; 2014:bau061, s. 1-21
-
Journal article (peer-reviewed)abstract
- DNA phylogenetic comparisons have shown that morphology-based species recognition often underestimates fungal diversity. Therefore, the need for accurate DNA sequence data, tied to both correct taxonomic names and clearly annotated specimen data, has never been greater. Furthermore, the growing number of molecular ecology and microbiome projects using high-throughput sequencing require fast and effective methods for en masse species assignments. In this article, we focus on selecting and re-annotating a set of marker reference sequences that represent each currently accepted order of Fungi. The particular focus is on sequences from the internal transcribed spacer region in the nuclear ribosomal cistron, derived from type specimens and/or ex-type cultures. Re-annotated and verified sequences were deposited in a curated public database at the National Center for Biotechnology Information (NCBI), namely the RefSeq Targeted Loci (RTL) database, and will be visible during routine sequence similarity searches with NR_prefixed accession numbers. A set of standards and protocols is proposed to improve the data quality of new sequences, and we suggest how type and other reference sequences can be used to improve identification of Fungi.
|
|
5. |
- Bartoli, A., et al.
(author)
-
Coupling economic and GHG emission accounting models to evaluate the sustainability of biogas policies
- 2019
-
In: Renewable & sustainable energy reviews. - : Elsevier. - 1364-0321 .- 1879-0690. ; 106, s. 133-148
-
Journal article (peer-reviewed)abstract
- The aim of this study is to evaluate and quantify the impacts of different biogas and related policies on the agricultural sector as well as their performance in terms of climate change mitigation and associated costs. To do so we coupled the partial equilibrium approach simulating the market clearing process with the perspective of Life Cycle Assessment of GHG applying it to the well-documented Lombardy case. Results show that the recent Italian biogas policy – prompting manure utilization and reducing the average subsidy per kWh – effectively increased the environmental sustainability of the system, which only now seems able to counteract global warming. Synergies are observed when the recent Common Agricultural Policy greening reform is simultaneously considered by the model.
|
|
6. |
- Bernabé, S., et al.
(author)
-
Highly integrated VCSEL-based 10Gb/s miniature optical sub-assembly
- 2005
-
In: Proceedings - Electronic Components and Technology Conference. - Lake Buena Vista, FL : IEEE. ; , s. 1333-1338
-
Conference paper (peer-reviewed)abstract
- In order to fit with the present and future needs of the Datacom transceiver market, newly designed high rate transmitter optical subassemblies (TOSAs) have to be compact, low cost and compatible with mass production. We propose here an innovative design strategy that reaches all these targets by integrating a 10Gbps 850nmVCSEL laser diode and its laser driver with other functionalities (e.g. power monitoring and thermal monitoring) in a small form factor package. Taking advantages of the optical properties of the VCSEL and using flip-chip techniques, the transmitter exhibits excellent hyperfrequency performances and compatibility with mass production due to the use of collective manufacturing technologies and passive optical alignment. This versatile approach is also applicable to high rate receivers, parallel optics emitters, and singlemode low cost transmitter integrating long wavelength VCSELs.
|
|
7. |
- Busby, CJ, et al.
(author)
-
The missing half of the subduction factory : shipboard results from the Izu rear arc, IODP expedition 350
- 2017
-
In: International Geology Review. - : Informa UK Limited. - 0020-6814 .- 1938-2839. ; 59:13, s. 1677-1708
-
Journal article (other academic/artistic)abstract
- IODP Expedition 350 was the first to be drilled in the rear part of the Izu-Bonin, although severalsites had been drilled in the arc axis to fore-arc region; the scientific objective was to understand theevolution of the Izu rear arc, by drilling a deep-water volcaniclastic section with a long temporalrecord (Site U1437). The Izu rear arc is dominated by a series of basaltic to dacitic seamount chainsup to ~100-km long roughly perpendicular to the arc front. Dredge samples from these aregeochemically distinct from arc front rocks, and drilling was undertaken to understand this arcasymmetry. Site U1437 lies in an ~20-km-wide basin between two rear arc seamount chains, ~90-kmwest of the arc front, and was drilled to 1804 m below the sea floor (mbsf) with excellent recovery.We expected to drill a volcaniclastic apron, but the section is much more mud-rich than expected(~60%), and the remaining fraction of the section is much finer-grained than predicted from itsposition within the Izu arc, composed half of ashes/tuffs, and half of lapilli tuffs of fine grain size(clasts <3 cm). Volcanic blocks (>6.4 cm) are only sparsely scattered through the lowermost 25% ofthe section, and only one igneous unit was encountered, a rhyolite peperite intrusion at~1390 mbsf. The lowest biostratigaphic datum is at 867 mbsf (~6.5 Ma), the lowest palaeomagneticdatum is at ~1300 mbsf (~9 Ma), and the rhyolite peperite at ~1390 mbsf has yielded a U–Pb zirconconcordia intercept age of (13.6 + 1.6/−1.7) Ma. Both arc front and rear arc sources contributed tothe fine-grained (distal) tephras of the upper 1320 m, but the coarse-grained (proximal) volcani-clastics in the lowest 25% of the section are geochemically similar to the arc front, suggesting arcasymmetry is not recorded in rocks older than ~13 Ma.
|
|
8. |
|
|
9. |
- Gilet, Ph., et al.
(author)
-
1.3 μm VCSELs : InGaAs/GaAs, GaInNAs/GaAs multiple quantum wells and InAs/GaAs quantum dots- Three candidates as active material
- 2007
-
In: Vertical - Cavity Surface - Emitting Lasers XI. - San Jose, CA : SPIE. ; , s. F4840-F4840
-
Conference paper (peer-reviewed)abstract
- In this article, we report our results on 1.3ÎŒm VCSELs for optical interconnection applications. Room temperature continuous-wave lasing operation is demonstrated for top emitting oxide-confined devices with three different active materials, highly strained InGaAs/GaAs(A) and GalnNAs/GaAs (B) multiple quantum wells (MQW) or InAs/GaAs (C) quantum dots (QD). Conventional epitaxial structures grown respectively by Metal Organic Vapour Phase Epitaxy (MOVPE), Molecular Beam Epitaxy (MBE) and MBE, contain rully doped GaAs/AlGaAs DBRs. All three epilayers are processed in the same way. Current and optical confinement are realized by selective wet oxidation. Circular apertures from 2 ÎŒm to 16 ÎŒm diameters are defined. At room temperature and in continuous wave operation, all three systems exhibit lasing operation at wavelengths above 1 275nm and reached 1 300nm for material (A). Typical threshold currents are in the range [1-10]mA and are strongly dependent firstly on oxide diameter and secondly on temperature. Room temperature cw maximum output power corresponds respectively to 1.77mW, 0.5mW and 0.6mW. By increasing driving current, multimode operation occurs at different level depending on the oxide diameter. In case (A), non conventional modal behaviors will be presented and explained by the presence of specific oxide modes. Thermal behaviors of the different devices have been compared. In case (A) and (C) we obtain a negative T0. We will conclude on the different active materials in terms of performances with respect to 1300nm VCSEL applications.
|
|
10. |
- Paquette, J., et al.
(author)
-
Risk of autoimmune diabetes in APECED : association with short alleles of the 5 ' insulin VNTR
- 2010
-
In: Genes and Immunity. - : Springer Science and Business Media LLC. - 1466-4879 .- 1476-5470. ; 11:7, s. 590-597
-
Journal article (peer-reviewed)abstract
- Autoimmune polyendocrinopathy-candidiasis-ectodermal dystrophy (APECED) is a rare autoimmune disease causing a wide spectrum of autoimmune dysfunction potentially including diabetes of an autoimmune etiology. We have previously described a pair of discordant APECED siblings and pointed to a possible role of 5' insulin variable number of tandem repeats (VNTR) locus IDDM2 in the appearance of diabetes within this disease. In vitro studies have previously suggested that class I VNTR alleles were associated with decreased fetal thymic insulin expression. We genotyped the 5' INS VNTR locus and several flanking 11p15.5 markers in 5' Finnish APECED subjects and explored the possible contribution of IDDM2 in the development of diabetes. The shorter 5' INS VNTR class I alleles (<35 repeats) were more prevalent in the diabetic Finnish APECED subjects than in non-diabetic APECED subjects. Logistic regression analysis revealed that having 1 short (<35) VNTR allele did not increase the risk of developing diabetes (95% CI 0.6-27.0), whereas having 2 short alleles conferred a 43.5-fold increased risk (95% CI 3.0-634.6). We conclude that short 5' INS VNTR class I alleles play a role in susceptibility to autoimmune diabetes in the context of APECED.
|
|