1. |
- Hua, Jing, 1989-, et al.
(author)
-
Controllable Friction of Green Ionic Liquids via Environmental Humidity
- 2020
-
In: Advanced Engineering Materials. - : John Wiley & Sons. - 1438-1656 .- 1527-2648. ; 22:5
-
Journal article (peer-reviewed)abstract
- Intelligent control of friction is an attractive but challenging topic. In this work, it is investigated if it would be possible to adjust friction in a lubricated contact by controlling environmental humidity. By exploiting the ability to adjust the environmental humidity by various saturated salt solutions, friction behavior of contacts lubricated with Choline l‐Proline ([Cho][Pro]) is modulated in a wide range of relative humidity (RH). The friction increases when the environmental humidity is increased and decreases when water is partially evaporated to a lower RH. It is thus possible to control friction by environmental humidity. The addition of water in ionic liquids (ILs) causes a decrease in viscosity, but as the tests are calculated to be performed in boundary lubrication the viscosity change is not the main factor for the change in friction. The friction sensitivity of RH can be explained by the effect of adhesion on the water uptake from humid air by [Cho][Pro]. Furthermore, the reversible changes of H‐bond types determined by the water content could be another explanation to the altered friction.
|
|
2. |
- Hua, Jing, 1989-, et al.
(author)
-
Non-corrosive Green Lubricant With Dissolved Lignin in Ionic Liquids Behave as Ideal Lubricants for Steel-DLC Applications
- 2019
-
In: Frontiers in Chemistry. - : Frontiers Media S.A.. - 2296-2646. ; 7
-
Journal article (peer-reviewed)abstract
- Diamond-like carbon (DLC)–steel contacts become more and more popular in the industry now. Since the surface chemical properties of DLC are quite different from those of iron, traditional formulated lubricants have problems to form tribo-chemical films, which are effective to improve the tribological performance for steel-steel contacts, on the surface of DLC. Thus, new lubricants formulation strategies are needed to be considered for steel-DLC applications. A kind of green lubricant (lignin-[Choline][L-Proline] (L-[CH][Pro])) without any traditional tribo-chemical active element, i.e., free of P, S, B, etc., was studied in this paper for the steel-DLC contact. To find the difference between this new ILs and the traditional lubricants, a commercially available fully formulated lubricant was used as a reference. An Optimol SRV-III oscillating friction and wear tester was used to evaluate the tribological performance. Three different kinds of commercially available DLC coatings (Tribobond 40(Cr + a-C:H:W), Tribobond 43 [(Cr+) a-C:H), and Tribobond 44(a-C:Cr)] were investigated. The results show that the ILs exhibit an obviously lower friction coefficient than that of the traditional commercially available fully formulated lubricant. Among those three DLC coatings, the (Cr+) a-C:H DLC coating exhibits the biggest improvement of wear resistance lubricated with the new ILs than that of the commercially available fully formulated lubricant. It's expected that its excellent tribological properties are attributed to the affinity of the ILs to the metal surface and the strength of the ionic liquids interactions by hydrogen bonding. Thus, forming strong physical adsorption strategy, instead of forming chemical tribo-films, is recommended to enhance the lubricating performance of lubricants for DLC.
|
|
3. |
- Kristan, Matej, et al.
(author)
-
The Sixth Visual Object Tracking VOT2018 Challenge Results
- 2019
-
In: Computer Vision – ECCV 2018 Workshops. - Cham : Springer Publishing Company. - 9783030110086 - 9783030110093 ; , s. 3-53
-
Conference paper (peer-reviewed)abstract
- The Visual Object Tracking challenge VOT2018 is the sixth annual tracker benchmarking activity organized by the VOT initiative. Results of over eighty trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis and a “real-time” experiment simulating a situation where a tracker processes images as if provided by a continuously running sensor. A long-term tracking subchallenge has been introduced to the set of standard VOT sub-challenges. The new subchallenge focuses on long-term tracking properties, namely coping with target disappearance and reappearance. A new dataset has been compiled and a performance evaluation methodology that focuses on long-term tracking capabilities has been adopted. The VOT toolkit has been updated to support both standard short-term and the new long-term tracking subchallenges. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website (http://votchallenge.net).
|
|
4. |
- Yu, Xin, et al.
(author)
-
Piezoelectric Effect Modulates Nanozyme Activity: Underlying Mechanism and Practical Application
- 2023
-
In: Small. - 1613-6810 .- 1613-6829. ; 19:52
-
Research review (peer-reviewed)abstract
- Nanozyme activity relies on surface electron transfer processes. Notably, the piezoelectric effect plays a vital role in influencing nanozyme activity by generating positive and negative charges on piezoelectric materials' surfaces. This article comprehensively reviews the potential mechanisms and practical applications of regulating nanozyme activity through the piezoelectric effect. The article first elucidates how the piezoelectric effect enables nanozymes to exhibit catalytic activity. It is highlighted that the positive and negative charges produced by this effect directly participate in redox reactions, leading to the conversion of materials from an inactive to an active state. Moreover, the piezoelectric field generated can enhance nanozyme activity by accelerating electron transfer rates or reducing binding energy between nanozymes and substrates. Practical applications of piezoelectric nanozymes are explored in the subsequent section, including water pollutant degradation, bacterial disinfection, biological detection, and tumor therapy, which demonstrate the versatile potentials of the piezoelectric effect in nanozyme applications. The review concludes by emphasizing the need for further research into the catalytic mechanisms of piezoelectric nanozymes, suggesting expanding the scope of catalytic types and exploring new application areas. Furthermore, the promising direction of synergistic catalytic therapy is discussed as an inspiring avenue for future research.
|
|
5. |
- Yu, Xin, et al.
(author)
-
Recent Development of Copper-Based Nanozymes for Biomedical Applications
- 2024
-
In: Advanced healthcare materials. - 2192-2640 .- 2192-2659. ; 13:1
-
Research review (peer-reviewed)abstract
- Copper (Cu), an indispensable trace element within the human body, serving as an intrinsic constituent of numerous natural enzymes, carrying out vital biological functions. Furthermore, nanomaterials exhibiting enzyme-mimicking properties, commonly known as nanozymes, possess distinct advantages over their natural enzyme counterparts, including cost-effectiveness, enhanced stability, and adjustable performance. These advantageous attributes have captivated the attention of researchers, inspiring them to devise various Cu-based nanomaterials, such as copper oxide, Cu metal-organic framework, and CuS, and explore their potential in enzymatic catalysis. This comprehensive review encapsulates the most recent advancements in Cu-based nanozymes, illuminating their applications in the realm of biochemistry. Initially, it is delved into the emulation of typical enzyme types achieved by Cu-based nanomaterials. Subsequently, the latest breakthroughs concerning Cu-based nanozymes in biochemical sensing, bacterial inhibition, cancer therapy, and neurodegenerative diseases treatment is discussed. Within this segment, it is also explored the modulation of Cu-based nanozyme activity. Finally, a visionary outlook for the future development of Cu-based nanozymes is presented.
|
|