1. |
- Anghel, Clara, et al.
(author)
-
Effects of Pt Surface Coverage on Oxidation of Zr and Other Materials
- 2009
-
In: ZIRCONIUM IN THE NUCLEAR INDUSTRY. - 9780803145146 ; , s. 285-302
-
Conference paper (peer-reviewed)abstract
- Certain elements, including noble metals, are identified to influence corrosion behavior of many metals in high-temperature water/steam and O-2. We have previously reported effects of porous Pt coatings on the thermal oxidation of Zr, Fe, Ni, Cr, and GaAs in O-2. Effects of Pt on oxidation of Zircaloy-2 in H2O have also been observed at temperatures near 400 degrees C. An enhanced oxidation rate is observed in all of the studied systems upon a sufficiently high surface Pt-particle density. Even more interesting, low Pt-particle density in most cases leads to a decreased oxidation rate. In the case of Zr and Zircaloy-2 the beneficial effect of Pt is stronger when hydrogen is present in the metal substrate and in the oxide layer. From O-18/SIMS experiments it is concluded that, for a sufficiently high Pt-particle density on the surface, enhanced transport of dissociated oxygen, On- (n=0; 2), towards the oxide/metal interface occurs in all of the studied systems. An oxygen spillover from Pt particles to the adjacent surface is a known phenomenon in catalysis and partly explains the results observed also in the current study of oxidation of Zr-based materials. Such a spillover involves a high surface diffusivity of dissociated oxygen, On-, which results in an increased gradient of On- across the oxide scale. In turn, the high oxygen gradient enhances the transport of oxygen towards the substrate/oxide-interface, This shows that not only diffusivity but also an effective activity of dissociated oxygen at the external oxide surface influences the oxidation rate. Naturally, the effects of Pt are maximized when small (nm-sized) and evenly distributed Pt particles are present on the surface. In our presentation a summary of obtained results of Pt additions on different materials will be given with suggested interpretations. Especially, the observed beneficial combination of Pt and hydrogen in the oxidation of Zr-based materials is discussed with a possible mechanistic explanation. Parallels are also drawn to the potential effect of Noble Metal Chemical Application (NMCA), used in a large traction of the U.S. BWRs, on the corrosion resistance of Zr-based claddings.
|
|
2. |
- Anghel, Clara, et al.
(author)
-
Effects of Pt surface coverage on oxidation of Zr and other materials
- 2008
-
In: Journal of ASTM International. - 1546-962X. ; 5:2
-
Journal article (peer-reviewed)abstract
- Certain elements, including noble metals, are identified to influence corrosion behavior of many metals in high-temperature water/steam and O 2. We have previously reported effects of porous Pt coatings on the thermal oxidation of Zr, Fe, Ni, Cr and GaAs in O2. Effects of Pt on oxidation of Zircaloy-2 In H2O have also been observed at temperatures near 400°C. An enhanced oxidation rate Is observed in all of the studied systems upon a sufficiently high surface Pt-particle density. Even more interesting, low Pt-particle density in most cases leads to a decreased oxidation rate. In the case of Zr and Zircaloy-2 the beneficial effect of Pt is stronger when hydrogen is present In the metal substrate and in the oxide layer. From 18O/SIMS experiments it is concluded that, for a sufficiently high Pt-particle density on the surface, enhanced transport of dissociated oxygen, On- (n=0; 2), towards the oxide/metal interface occurs in all of the studied systems. An oxygen spillover from Pt particles to the adjacent surface is a known phenomenon in catalysis and partly explains the results observed also in the current study of oxidation of Zr-based materials. Such a spillover involves a high surface diffusivity of dissociated oxygen, O n-, which results In an increased gradient of On- across the oxide scale. In turn, the high oxygen gradient enhances the transport of oxygen towards the substrate/oxide-interface. This shows that not only diffusivlty but also an effective activity of dissociated oxygen at the external oxide surface influences the oxidation rate. Naturally, the effects of Pt are maximized when small (nm-sized) and evenly distributed Pt particles are present on the surface. In our presentation a summary of obtained results of Pt additions on different materials will be given with suggested interpretations. Especially, the observed beneficial combination of Pt and hydrogen in the oxidation of Zr-based materials Is discussed with a possible mechanistic explanation. Parallels are also drawn to the potential effect of Noble Metal Chemical Application (NMCA), used in a large fraction of the U.S. BWRs, on the corrosion resistance of Zr-based claddings.
|
|
3. |
- Anghel, Clara, et al.
(author)
-
Gas phase analysis of CO interactions with solid surfaces at high temperatures
- 2004
-
In: Applied Surface Science. - : Elsevier BV. - 0169-4332 .- 1873-5584. ; 233:1-4, s. 392-401
-
Journal article (peer-reviewed)abstract
- An in situ method including mass spectrometry and labeled gases is presented and used to gain information on adsorption of molecules at high temperatures (>300 degreesC). Isotopic exchange rate in H-2 upon exposure to an oxidized zicaloy-2 sample and exchange rate in CO upon exposure to various materials have been measured. From these measurements, molecular dissociation rates in respective system have been calculated. The influence of CO and N-2 on the uptake rate of H-2 in zirconium and oxidized zicaloy-2 is discussed in terms of tendency for adsorption at high temperatures. In the case of oxidized Cr exposed to CO gas With C-12, C-13, O-16 and O-18, the influence of H2O is investigated with respect to dissociation of CO molecules. The presented data supports a view of different tendencies for molecular adsorption of H2O, CO, N-2, and H-2 molecules on surfaces at high temperatures.
|
|
4. |
- Anghel, Clara, et al.
(author)
-
Gas-tight oxides – Reality or just a Hope
- 2006
-
In: Materials Science Forum. - 0255-5476 .- 1662-9752. ; 522-523, s. 93-101
-
Journal article (peer-reviewed)abstract
- A better understanding of the transport properties of gases in oxides is certainly very important in many applications. In the case of metals, a general protection measure against corrosion implies formation of a dense metal oxide scale. The scale should act as a barrier against gas transport and consequently it needs to be gas-tight. This is often assumed but rarely, if ever, confirmed. Hence there is a need for characterization of micro- and/or meso- pores formed especially during the early oxidation stage of metallic materials. This paper presents a novel and relatively straightforward method for characterization of gas release from an oxide previously equilibrated in a controlled atmosphere. The geometry of the sample is approximated to be a plate. The plate can be self-supporting or constitute a scale on a substrate. A mathematical model for calculation of diffusivity and gas content is given for this geometry. A desorption experiment, involving a mass spectrometer placed in ultra high vacuum, can be used to determine diffusivity and amount of gas released with aid of the mathematical model. The method is validated in measurements of diffusivity and solubility of He in quartz and applied in characterization of two Zr-oxides and one Fe oxide. From the outgassed amounts of water and nitrogen the H2O/N-2 molar ratio can be used to estimate an effective pore size in oxides.
|
|
5. |
- Anghel, Clara, et al.
(author)
-
Influence of Pt, Fe/Ni/Cr–containing intermetallics and deuterium on the oxidation of Zr-based materials
- 2005
-
In: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 340:2-3, s. 271-283
-
Journal article (peer-reviewed)abstract
- An in situ gas phase analysis technique and the 18O-SIMS technique are used to evaluate the transport of oxygen and hydrogen in oxidation of Zr-based materials. At 400 °C, it is found that oxygen dissociation efficiency decreases in the order: Pt > Zr2Fe > Zr2Ni > ZrCr2 Zircaloy-2. Two Zr-plates partly coated with 200 Å porous Pt, with and respectively without D in the substrate, were oxidized in two stages at 400 °C. SIMS depth profiles in the Pt area show that an enhanced oxidation takes place mainly by inward oxygen transport. A minimum in the oxide thickness was found near the Pt area on both Zr plates. Two Ar-filled Zircaloy-2 tubes with ZrSn liner were exposed at 370 °C to 22 mbar water, filled in from one side. Our experimental results suggest that a proper choice of the SPP composition and size distribution can lead to reduced hydrogen uptake during oxidation of Zr-based materials in water.
|
|
6. |
- Anghel, Clara, 1971-
(author)
-
Modified oxygen and hydrogen transport in Zr-based oxides
- 2006
-
Doctoral thesis (other academic/artistic)abstract
- Most metals and alloys in the presence of oxygen and moisture will instantaneously react and form a thin (2-5 nm) surface oxide layer. For further reaction to occur, oxygen ions and/or metal cations often diffuse through the already formed oxide layer. The corrosion resistance of a metal in aggressive environments at high temperatures depends on the properties of the surface oxide scale. Zirconium-based alloys represent the main structural materials used in water-cooled nuclear reactors. For these materials, the formation of a thin, adherent oxide scale with long-term stability in high temperature water/steam under irradiation conditions, is crucial. In this thesis, the transport of oxygen and hydrogen through Zr-based oxide scales at relevant temperatures for the nuclear industry is investigated using isotopic gas mixtures and isotope-monitoring techniques such as Gas Phase Analysis and Secondary Ion Mass Spectrometry. Porosity development in the oxide scales generates easy diffusion pathways for molecules across the oxide layer during oxidation. A considerable contribution of molecular oxygen to total oxygen transport in zirconia has been observed at temperatures up to 800°C. A novel method for evaluation of the gas diffusion, gas concentration and effective pore size of oxide scales is presented in this thesis. Effective pore sizes in the nanometer range were found for pretransition oxides on Zircaloy-2. A mechanism for densification of oxide scales by obtaining a better balance between inward oxygen and outward metal transport is suggested. Outward Zr transport can be influenced by the presence of hydrogen in the oxide and/or metal substrate. Inward oxygen transport can be promoted by oxygen dissociating elements such as Fe-containing second phase particles. The results suggest furthermore that a proper choice of the second-phase particles composition and size distribution can lead to the formation of dense oxides, which are characterized by low oxygen and hydrogen uptake rates during oxidation. Hydrogen uptake in Zr-based materials during oxidation in high temperature water/steam can generate degradation due to the formation of brittle hydrides in the metal substrate. A promising method for the suppression of hydrogen uptake has been developed and is presented in this thesis.
|
|
7. |
- Belonoshko, Anatoly B., et al.
(author)
-
First-principles study of hydrogen diffusion in α-Al 2O3 and liquid alumina
- 2004
-
In: Physical Review B Condensed Matter. - 0163-1829 .- 1095-3795. ; 69:2, s. 243021-243026
-
Journal article (peer-reviewed)abstract
- We have studied the energetics and mobility of neutral hydrogen in alumina Al2O3 using ab initio density-functional calculations. The mobility of hydrogen was studied in corundum (α-Al2O 3) as well as in liquid alumina. Using both static as well as molecular-dynamics calculations, and applying classical transition state theory, we derive the temperature-dependent diffusivity of hydrogen in α-Al 2O3 as D(T)=(21.7 × 10-8 m 2/s)exp(-1.24 eV/kT). The corresponding diffusivity of hydrogen in liquid/amorphous alumina, derived directly from ab initio molecular dynamics calculations, is D(T)=(8.71 × 10-7 m2/s)exp(-0.91 eV/kT). The computed diffusivity compares very well to experimental data. We conclude that diffusion of neutral hydrogen through the bulk of alumina is a good approximation of the mechanism for hydrogen mobility in corrosion scales. The representation of grain-boundary structures by amorphous alumina is, probably, realistic at higher temperatures.
|
|
8. |
- Belonoshko, Anatoly B., et al.
(author)
-
Thermal regimes of passivative oxide film formation on Al surface : Theoretical and experimental study
- 2006
-
In: Surface Science. - : Elsevier BV. - 0039-6028 .- 1879-2758. ; 600:20, s. 4796-4800
-
Journal article (peer-reviewed)abstract
- We report results of ab initio molecular dynamics simulations of an Al surface exposed to an oxygen atmosphere. The results, supported by experiments performed in this study, demonstrate that the Al surface, by reacting with the oxygen molecules, can be heated above melting temperature and transformed into a liquid. This process is potentially capable of creating an amorphous corrosion scale which might possess an enhanced resistance to deterioration.
|
|
9. |
- Carlsson, Bo, et al.
(author)
-
Studies of the Photochromic Properties of the System CuCl(s)-H2O(l) Using Auger Electron Spectroscopy
- 1977
-
In: Journal of Photochemistry. - : Elsevier BV. - 0047-2670. ; 7:1, s. 51-58
-
Journal article (peer-reviewed)abstract
- The photochromic disproportionation of Cu+ into Cu2+ and Cu0 has been studied in the system CuCl(s)---H2O(l) by obtaining Auger electron spectroscopy measurements of copper in CuCl. The MMM Auger spectrum of CuCl consists mainly of one broad peak with a maximum at an energy 4 eV lower than the two main peaks in the spectrum of metallic copper. In photochromic coloured CuCl only one additional peak appears within the energy range of the peaks of metallic copper, but in the spectrum of CuCl exposed to a concentrated electron beam both metallic copper peaks are visible. This provides experimental evidence that photochemically produced metallic copper clusters in CuCl are extremely small compared with the metallic copper particles formed during electron exposure.
|
|
10. |
- Cetinkaya, Cihan, et al.
(author)
-
Combined IFN-gamma and retinoic acid treatment targets the N-Myc/Max/Mad1 network resulting in repression of N-Myc target genes in MYCN-amplified neuroblastoma cells
- 2007
-
In: Molecular Cancer Therapeutics. - 1535-7163 .- 1538-8514. ; 6:10, s. 2634-2641
-
Journal article (peer-reviewed)abstract
- The MYCN protooncogene is involved in the control of cell proliferation, differentiation, and survival of neuroblasts. Deregulation of MYCN by gene amplification contributes to neuroblastoma development and is strongly correlated to advanced disease and poor outcome, emphasizing the urge for new therapeutic strategies targeting MYCN function. The transcription factor N-Myc, encoded by MYCN, regulates numerous genes together with its partner Max, which also functions as a cofactor for the Mad/Mnt family of Myc antagonists/transcriptional repressors. We and others have previously reported that IFN-gamma synergistically potentiates retinoic acid (RA)induced sympathetic differentiation and growth inhibition in neuroblastoma cells. This study shows that combined treatment of MYCN-amplified neuroblastorna cells with RA+IFN-gamma down-regulates N-Myc protein expression through increased protein turnover, up-regulates Mad1 mRNA and protein, and reduces N-Myc/Max heteroclimerization. This results in a shift of occupancy at the ornithine decarboxylase N-Myc/Mad1 target promoter in vivo from N-Myc/Max to Madl/Max predominance, correlating with histone H4 deacetylation, indicative of a chromatin structure typical of a transcriptionally repressed state. This is further supported by data showing that RA + IFN-gamma treatment strongly represses expression of N-Myc/Mad1 target genes ornithine decarboxylase and hTERT. Our results suggest that combined IFN-gamma and RA signaling can form a basis for new therapeutic strategies targeting N-Myc function for patients with high-risk, MYCN-amplified neuroblastoma.
|
|