| 1. |
- Zhang, Xiaoliang, et al.
(author)
-
Inorganic CsPbI3 Perovskite Coating on PbS Quantum Dot for Highly Efficient and Stable Infrared Light Converting Solar Cells
- 2018
-
In: Advanced Energy Materials. - : Wiley-VCH Verlagsgesellschaft. - 1614-6832 .- 1614-6840. ; 8:6
-
Journal article (peer-reviewed)abstract
- Solution-processed colloidal quantum dot (CQD) solar cells harvesting the infrared part of the solar spectrum are especially interesting for future use in semitransparent windows or multilayer solar cells. To improve the device power conversion efficiency (PCE) and stability of the solar cells, surface passivation of the quantum dots is vital in the research of CQD solar cells. Herein, inorganic CsPbI3 perovskite (CsPbI3-P) coating on PbS CQDs with a low-temperature, solution-processed approach is reported. The PbS CQD solar cell with CsPbI3-P coating gives a high PCE of 10.5% and exhibits remarkable stability both under long-term constant illumination and storage under ambient conditions. Detailed characterization and analysis reveal improved passivation of the PbS CQDs with the CsPbI3-P coating, and the results suggest that the lattice coherence between CsPbI3-P and PbS results in epitaxial induced growth of the CsPbI3-P coating. The improved passivation significantly diminishes the sub-bandgap trap-state assisted recombination, leading to improved charge collection and therefore higher photovoltaic performance. This work therefore provides important insight to improve the CQD passivation by coating with an inorganic perovskite ligand for photovoltaics or other optoelectronic applications.
|
|
| 2. |
- Andruszkiewicz, Aneta, et al.
(author)
-
Perovskite and quantum dot tandem solar cells with interlayer modification for improved optical semitransparency and stability
- 2021
-
In: Nanoscale. - : Royal Society of Chemistry. - 2040-3364 .- 2040-3372. ; 13:12, s. 6234-6240
-
Journal article (peer-reviewed)abstract
- In this work, four-terminal (4T) tandem solar cells were fabricated by using a methylammonium lead iodide (MAPbI3) perovskite solar cell (PSC) as the front-cell and a lead sulfide (PbS) colloidal quantum dot solar cell (CQDSC) as the back-cell. Different modifications of the tandem interlayer, at the interface between the sub-cells, were tested in order to improve the infrared transparency of the perovskite sub-cell and consequently increase the utilization of infrared (IR) light by the tandem system. This included the incorporation of a semi-transparent thin gold electrode (Au) on the MAPbI3 solar cell, followed by adding a molybdenum(VI) oxide (MoO3) layer or a surlyn layer. These interlayer modifications resulted in an increase of the IR transmittance to the back cell and improved the optical stability, compared to that in the reference devices. This investigation shows the importance of the interlayer, connecting the PSC with a strong absorption in the visible region and the CQDSC with a strong infrared absorption to obtain efficient next-generation tandem photovoltaics (PVs).
|
|
| 3. |
- Ghoreishi, Farzaneh S., et al.
(author)
-
Enhanced performance of CH3NH3PbI3 perovskite solar cells via interface modification using phenyl ammonium iodide derivatives
- 2020
-
In: Journal of Power Sources. - : ELSEVIER. - 0378-7753 .- 1873-2755. ; 473
-
Journal article (peer-reviewed)abstract
- Interface modification in perovskite solar cells is a key factor for achieving high power conversion efficiency by suppressing electron-hole recombination and accelerating charge carrier extraction. Here, we use a series of phenyl ammonium derivatives, phenyl ammonium iodide (PAI), benzyl ammonium iodide (BAI), and phenyl ethyl ammonium iodide (PEAI), to modify the interface between methylammonium lead triiodide (MAPbI(3)) perovskite and Spiro-OMeTAD as a hole transport layer in solar cell devices. The structural and optical properties of the perovskite films are studied and the results reveal the formation of two-dimensional perovskite interfacial layers on the surface of the MAPbI(3) film modified with PEAI and BAI whereas the MAPbI(3) layer modified with PAI gives an interface layer with slightly different properties compared to the two-dimensional perovskite. Impedance spectroscopy shows that the charge transport resistance of the interface engineered solar cells decreases when compared to pristine MAPbI(3). In addition, slower open-circuit voltage decay and longer carrier lifetime are also observed for the modified cells which in total lead to the improvement of the photovoltaic performance. The investigation therefore gives insight in the effect of interface modifications, and especially how different sizes of the molecular interface modifier results in different interface formation and characteristics.
|
|
| 4. |
- Jia, Qiaoying, et al.
(author)
-
Large-Grained All-Inorganic Bismuth-Based Perovskites with Narrow Band Gap via Lewis Acid-Base Adduct Approach
- 2020
-
In: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 12:39, s. 43876-43884
-
Journal article (peer-reviewed)abstract
- Bismuth halide perovskites have recently been considered a potential alternative to lead halide analogues due to their low toxicity and high stability. However, the layered flake structure and wide band gap limit their applications in perovskite solar cells (PSCs). We herein show that large-grained all-inorganic bismuth-based perovskites with a narrow band gap can be obtained from a Lewis acid-base adduct reaction under ambient conditions. Thiourea (CH4N2S) is utilized as a Lewis base to interact with BiI3, confirmed with infrared (IR) spectra. The strong coordination between thiourea and the Bi3+ center could slow down the perovskite crystallization and promote the preferred orientation of the perovskite crystals with a hexagonal phase. The morphology of the perovskite films varies dramatically with an increase of molar ratio of BiI3 and thiourea in the precursor. The perovskites derived from a BiI3/thiourea ratio of 1:2 display extrathick grains, higher surface coverage, extended light absorption, higher crystallinity, and similar air stability compared to the pristine sample. The power conversion efficiency (PCE) of the thiourea-induced bismuth perovskite solar cells is significantly enhanced due to the higher surface coverage and the broader absorption of the perovskite film.
|
|
| 5. |
|
|
| 6. |
- Johansson, Malin B, 1972-, et al.
(author)
-
Cesium Bismuth Iodide Solar Cells from Systematic Molar Ratio Variation of CsI and BiI3
- 2019
-
In: Inorganic Chemistry. - : AMER CHEMICAL SOC. - 0020-1669 .- 1520-510X. ; 58:18, s. 12040-12052
-
Journal article (peer-reviewed)abstract
- Metal halide compounds with photovoltaic properties prepared from solution have received increased attention for utilization in solar cells. In this work, low-toxicity cesium bismuth iodides are synthesized from solution, and their photovoltaic and, optical properties as well as electronic and crystal structures are investigated. The X-ray diffraction patterns reveal that a CsI/BiI3 precursor ratio of 1.5:1 can convert pure rhombohedral BiI3 to pure hexagonal Cs3Bi2I9, but any ratio intermediate of this stoichiometry and pure BiI3 yields a mixture containing the two crystalline phases Cs3Bi2I9 and BiI3, with their relative fraction depending on the CsI/BiI3 ratio. Solar cells from the series of compounds are characterized, showing the highest efficiency for the compounds with a mixture of the two structures. The energies of the valence band edge were estimated using hard and soft X-ray photoelectron spectroscopy for more bulk and surface electronic properties, respectively. On the basis of these measurements, together with UV-vis-near-IR spectrophotometry, measuring the band gap, and Kelvin probe measurements for estimating the work function, an approximate energy diagram has been compiled clarifying the relationship between the positions of the valence and conduction band edges and the Fermi level.
|
|
| 7. |
- Johansson, Malin B., 1972-, et al.
(author)
-
Highly crystalline MAPbI3 perovskite grain formation by irreversible poor-solvent diffusion aggregation, for efficient solar cell fabrication
- 2020
-
In: Nano Energy. - : Elsevier Ltd. - 2211-2855 .- 2211-3282. ; 78
-
Journal article (peer-reviewed)abstract
- Energy efficient synthesis providing high quality crystalline thin films are highly desired in many applications. Here we devise a non-toxic solvent approach for production of highly crystalline MAPbI3 perovskite by exploiting diffusion aggregation processes. Isopropanol solution based methylammonium lead triiodide (MAPbI3) is used in this context, where the crystal growth initiation starts in an unstable suspension far from equilibrium and the subsequent crystallization is driven by the solubility parameters. The crystal formation is monitored by scanning transmission electron microscope (STEM), observing small crystallization centers growing as time evolves to large grains with high crystal purity. Energy dispersive X-ray spectroscopy (EDS) in STEM mode revealed a Pb rich core-shell structure in newly formed grains. Nano-beam Electron Diffraction (NBED) scan defined PbI2 crystallites in the Pb rich shell with a single crystal MAPbI3 core in newly formed grains. After a week stirring, the same aggregated suspension exhibited grains with only single crystal MAPbI3 structure. The NBED analysis shows a kinetically slow transition from a core shell structure to a single crystal grain. This research presents an impactful insight on the factors that may cause sub-stoichiometric grain boundary effects which can influence the solar cell performance. In addition, the structure, morphology and optical properties of the perovskite grains have been presented. A powder of highly crystalline particles was subsequently prepared by evaporation of the solvent in a low-vacuum oven. Thin film MAPbI3 solar cells were fabricated by dissolving the powder and applying it in a classical fabrication route. The MAPbI3 solar cells gave a champion efficiency of 20% (19.9%) and an average efficiency at approximately 17% with low hysteresis effects. Here a strategy to manufacture the material structure without toxic solvents is highlighted. The single-crystal growth devised here opens both for shelf storage of materials as well as a more flexible manufacturing of devices. The process can likely be extended to other fields, where the intermediate porous framework and large surface area would be beneficial for battery or super capacitor materials.
|
|
| 8. |
- Pazoki, Meysam, et al.
(author)
-
Photon Energy-Dependent Hysteresis Effects in Lead Halide Perovskite Materials
- 2017
-
In: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 121:47, s. 26180-26187
-
Journal article (peer-reviewed)abstract
- Lead halide perovskites have a range of spectacular properties and interesting phenomena and are a serious candidate for the next generation of photovoltaics with high efficiencies and low fabrication costs. An interesting phenomenon is the anomalous hysteresis often seen in current-voltage scans, which complicates accurate performance measurements but has also been explored to obtain a more comprehensive understanding of the device physics. Herein, we demonstrate a wavelength and illumination intensity dependency of the hysteresis in state-of-the-art perovskite solar cells with 18% power conversion efficiency (PCE), which gives new insights into ion migration. The perovskite devices show lower hysteresis under illumination with near band edge (red) wavelengths compared to more energetic (blue) excitation. This can be rationalized with thermalization-assisted ion movement or thermalization-assisted vacancy generation. These explanations are supported by the dependency of the photovoltage decay with illumination time and excitation wavelength, as well as by impedance spectroscopy. The suggested mechanism is that high-energy photons create hot charge carriers that either through thermalization can create additional vacancies or by release of more energetic phonons play a role in overcoming the activation energy for ion movement. The excitation wavelength dependency of the hysteresis presented here gives valuable insights into the photophysics of the lead halide perovskite solar cells.
|
|
| 9. |
- Phuyal, Dibya, et al.
(author)
-
The electronic structure and band interface of cesium bismuth iodide on a titania heterostructure using hard X-ray spectroscopy
- 2018
-
In: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 6:20, s. 9498-9505
-
Journal article (peer-reviewed)abstract
- Bismuth halide compounds as a non-toxic alternative are increasingly investigated because of their potential in optoelectronic devices and their rich structural chemistry. Hard X-ray spectroscopy was applied to the ternary bismuth halide Cs3Bi2I9 and its related precursors BiI3 and CsI to understand its electronic structure at an atomic level. We specifically investigated the core levels and valence band using X-ray photoemission spectroscopy (PES), high-resolution X-ray absorption (HERFD-XAS), and resonant inelastic X-ray scattering (RIXS) to get insight into the chemistry and the band edge properties of the two bismuth compounds. Using these element specific X-ray techniques, our experimental electronic structures show that the primary differences between the two bismuth samples are the position of the iodine states in the valence and conduction bands and the degree of hybridization with bismuth lone pair (6s(2)) states. The crystal structure of the two layered quasi-perovskite compounds plays a minor role in modifying the overall electronic structure, with variations in bismuth lone pair states and iodine band edge states. Density Functional Theory (DFT) calculations are used to compare with experimental data. The results demonstrate the effectiveness of hard X-ray spectroscopies to identify element specific bulk electronic structures and their use in optoelectronic devices.
|
|
| 10. |
- Pitaro, Matteo, et al.
(author)
-
A carbazole-based self-assembled monolayer as the hole transport layer for efficient and stable Cs(0.25)FA(0.75)Sn(0.5)Pb(0.5)I(3) solar cells
- 2023
-
In: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 11:22, s. 11755-11766
-
Journal article (peer-reviewed)abstract
- Mixed tin/lead (Sn/Pb) perovskites have the potential to achieve higher performances in single junction solar cells compared to Pb-based compounds. The best Sn/Pb based devices are fabricated in a p-i-n structure, and PEDOT:PSS is frequently utilized as the hole transport layer, even if there are many doubts on a possible detrimental role of this conductive polymer. Here, we propose the use of [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz) and [2-(3, 6-dibromo-9H-carbazol-9-yl) ethyl] phosphonic acid (Br-2PACz) as substitutes for PEDOT:PSS. By using Cs(0.25)FA(0.75)Sn(0.5)Pb(0.5)I(3) as the active layer, we obtained record efficiencies as high as 19.51% on Br-2PACz, while 18.44% and 16.33% efficiencies were obtained using 2PACz and PEDOT:PSS, respectively. In addition, the implemented monolayers enhance both the shelf lifetime of the device as well as the operational stability. Finally, the Br-2PACz-based devices maintained 80% of their initial efficiency under continuous illumination for 230 h, and after being stored in a N-2 atmosphere for 4224 h (176 days).
|
|
