1. |
- Sahlberg, Martin, 1981-, et al.
(author)
-
A new material for hydrogen storage; ScAl0.8Mg0.2
- 2009
-
In: Journal of Solid State Chemistry. - : Elsevier BV. - 0022-4596 .- 1095-726X. ; 182:11, s. 3113-3117
-
Journal article (peer-reviewed)abstract
- A novel aluminium rich alloy for hydrogen storage has been discovered, ScAl0.8Mg0.2, which has very promising properties regarding hydrogen storage capacity, kinetics and stability towards air oxidation in comparison to hydrogen absorption in state-of-the-art intermetallic compounds. The absorption of hydrogen was found to be very fast, even without adding any catalyst, and reversible. The discovered alloy crystallizes in a CsCl-type structure, but decomposes to ScH2 and Al(Mg) during hydrogen absorption. Detailed analysis of the hydrogen absorption in ScAl0.8Mg0.2 has been performed using in situ synchrotron radiation powder X-ray diffraction, neutron powder diffraction and quantum mechanical calculations. The results from theory and experiments are in good agreement with each other.
|
|
2. |
- Ahuja, B. L., et al.
(author)
-
A study of electron momentum density and charge transfer in W-Cu system
- 2009
-
In: Journal of Alloys and Compounds. - : Elsevier BV. - 0925-8388 .- 1873-4669. ; 467:1-2, s. 595-599
-
Journal article (peer-reviewed)abstract
- We present the first ever Compton scattering study on WxCu1-x(x=0.60, 0.72) alloys. The Compton profile measurements have been made using 20Ci (CS)-C-137 gamma-ray source. The experimental data are compared with the superposition of APW-based Compton profiles of constituent metals. A schematic study on charge transfer has been reported using the experimental valence band Compton profiles of both the alloys, W and Cu. Our first ever data support the charge transfer from W to Cu on alloying, which is also confirmed by our band structure calculations employing exact muffin-tin orbitals method (EMTO). (C) 2007 Elsevier B.V. All rights reserved.
|
|
3. |
- Chimata, Raghuveer, et al.
(author)
-
All-thermal switching of amorphous Gd-Fe alloys : Analysis of structural properties and magnetization dynamics
- 2015
-
In: Physical Review B. Condensed Matter and Materials Physics. - 1098-0121 .- 1550-235X. ; 92:9
-
Journal article (peer-reviewed)abstract
- In recent years there has been an intense interest in understanding the microscopic mechanism of thermally induced magnetization switching driven by a femtosecond laser pulse. Most of the effort has been dedicated to periodic crystalline structures while the amorphous counterparts have been less studied. By using a multiscale approach, i.e., first-principles density functional theory combined with atomistic spin dynamics, we report here on the very intricate structural and magnetic nature of amorphous Gd-Fe alloys for a wide range of Gd and Fe atomic concentrations at the nanoscale level. Both structural and dynamical properties of Gd-Fe alloys reported in this work are in good agreement with previous experiments. We calculated the dynamic behavior of homogeneous and inhomogeneous amorphous Gd-Fe alloys and their response under the influence of a femtosecond laser pulse. In the homogeneous sample, the Fe sublattice switches its magnetization before the Gd one. However, the temporal sequence of the switching of the two sublattices is reversed in the inhomogeneous sample. We propose a possible explanation based on a mechanism driven by a combination of the Dzyaloshinskii-Moriya interaction and exchange frustration, modeled by an antiferromagnetic second-neighbor exchange interaction between Gd atoms in the Gd-rich region. We also report on the influence of laser fluence and damping effects in the all-thermal switching.
|
|
4. |
|
|
5. |
- George, Sebastian, 1990-, et al.
(author)
-
Local structure in amorphous SmxCo1-x : a combined experimental and theoretical study
- 2020
-
In: Journal of Materials Science. - : Springer Science and Business Media LLC. - 0022-2461 .- 1573-4803. ; 55, s. 12488-12498
-
Journal article (peer-reviewed)abstract
- Using a combination of extended X-ray absorption fine structure measurements, stochastic quenching (SQ) calculations and Voronoi tessellation analysis, the local atomic environments in thin films of amorphous SmxCo1−x (x= 0.10, 0.22 and 0.35) are investigated and also compared with crystalline stoichiometric Sm–Co alloys of similar compositions. It is found that the variations in local environment around Co atoms in the amorphous films increase with increasing x and that none of the films exhibit any pronounced short-range order around the Sm atoms. There are, however, signs of clustering of Sm atoms in the SQ-generated simulated amorphous materials. Furthermore, good agreement is observed between experimentally obtained parameters, e.g., interatomic distances and coordination numbers, and those extracted from the simulated alloys. This is a strong indication that SQ provides a powerful route to reliable local structure information for amorphous rare earth–transition metal alloys and that it could be used for designing materials with properties that meet the demands of specific applications.
|
|
6. |
- Hu, Q. M., et al.
(author)
-
Hardness and elastic properties of covalent/ionic solid solutions from first-principles theory
- 2008
-
In: Journal of Applied Physics. - : AIP Publishing. - 0021-8979 .- 1089-7550. ; 103:8
-
Journal article (peer-reviewed)abstract
- Most of the engineering materials are alloys (solid solutions) and inevitably contain some impurities or defects such as vacancies. However, theoretical predictions of the hardness of this kind of materials have rarely been addressed in literature. In this paper, a hardness formula for multicomponent covalent solid solution is proposed based on the work of Simunek and Vackar [Phys. Rev. Lett. 96, 085501 (2006)]. With this formula, the composition dependence of the hardness is investigated for titanium nitrogencarbide (TiN1-xCx), off-stoichiometric transition-metal nitrides (TiN1-x and VN1-x), and B-doped semiconductors. The predicted hardness is in good agreement with experiments. To investigate the most frequently quoted correlation between hardness and elastic modulus, the elastic moduli of the systems involved in this paper have also been calculated. The results show that the elastic moduli cannot be used for rigorous predictions of the hardness of the solid solutions.
|
|
7. |
|
|
8. |
- Hu, Qing-Miao, et al.
(author)
-
Predicting hardness of covalent/ionic solid solution from first-principles theory
- 2007
-
In: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 91:12, s. 121918-
-
Journal article (peer-reviewed)abstract
- We introduce a hardness formula for the multicomponent covalent and ionic solid solutions. This expression is tested on nitride spinel materials A3N4 (A=C,Si,Ge) and applied to titanium nitrogen carbide (TiN1-xCx with 0<=x<=1), off-stoichiometric transition-metal nitride (TiN1-x and VN1-x with x<=0.25), and B-doped semiconductors (C1-xBx, Si1-xBx, and Ge1-xBx with x<=0.1). In all cases, the theoretical hardness is in good agreement with experiments.
|
|
9. |
- Huang, Shuo, et al.
(author)
-
Phase stability and magnetic behavior of FeCrCoNiGe high-entropy alloy
- 2015
-
In: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 107:25
-
Journal article (peer-reviewed)abstract
- We report an alternative FeCrCoNiGe magnetic material based on FeCrCoNi high-entropy alloy with Curie point far below the room temperature. Investigations are done using first-principles calculations and key experimental measurements. Results show that the equimolar FeCrCoNiGe system is decomposed into a mixture of face-centered cubic and body-centered cubic solid solution phases. The increased stability of the ferromagnetic order in the as-cast FeCrCoNiGe composite, with measured Curie temperature of 640 K, is explained using the exchange interactions.
|
|
10. |
- Isaeva, Leyla, et al.
(author)
-
Amorphous W-S-N thin films: the atomic structure behind ultra-low friction
- 2015
-
In: Acta Materialia. - : Elsevier BV. - 1359-6454 .- 1873-2453. ; 82, s. 84-93
-
Journal article (peer-reviewed)abstract
- Amorphous W–S–N in the form of thin films has been identified experimentally as an ultra-low friction material, enabling easy sliding by the formation of a WS2 tribofilm. However, the atomic-level structure and bonding arrangements in amorphous W–S–N, which give such optimum conditions for WS2 formation and ultra-low friction, are not known. In this study, amorphous thin films with up to 37 at.% N are deposited, and experimental as well as state-of-the-art ab initio techniques are employed to reveal the complex structure of W–S–N at the atomic level. Excellent agreement between experimental and calculated coordination numbers and bond distances is demonstrated. Furthermore, the simulated structures are found to contain N bonded in molecular form, i.e. N2, which is experimentally confirmed by near edge X-ray absorption fine structure and X-ray photoelectron spectroscopy analysis. Such N2 units are located in cages in the material, where they are coordinated mainly by S atoms. Thus this ultra-low friction material is shown to be a complex amorphous network of W, S and N atoms, with easy access to W and S for continuous formation of WS2 in the contact region, and with the possibility of swift removal of excess nitrogen present as N2 molecules.
|
|