1. |
- Ameen, Arman, 1976-, et al.
(author)
-
Energy saving, indoor thermal comfort and indoor air quality evaluation of an office environment using corner impinging jet ventilation
- 2023
-
In: Developments in the Built Environment. - : Elsevier. - 2666-1659. ; 15
-
Journal article (peer-reviewed)abstract
- The performance of a corner based impinging jet ventilation system (CIJV) in an office environment was evaluated numerically. The evaluation was done both in terms of the local thermal comfort and the local indoor air quality. Three different inlet configurations were tested for a range of outdoor temperatures that included both winter and summer conditions. In terms of indoor air quality, the results showed that CIJV performed better than a traditional mixing system. The study also revealed that CIJV creates a stronger temperature stratification in summertime compared to wintertime. When evaluating the energy saving potential the results showed a possible reduction of 7% for the ventilation flowrate when the outdoor temperatures were between -15 °C and -5 °C, 8 % when the outdoor temperatures were between 0 °C and 10 °C and 9 % when the outdoor temperatures were between 15 °C and 25 °C.
|
|
2. |
- Ameen, Arman, 1976-, et al.
(author)
-
Experimental Investigation of Ventilation Performance of Different Air Distribution Systems in an Office Environment : Heating Mode
- 2019
-
In: Energies. - : MDPI AG. - 1996-1073. ; 12:10
-
Journal article (peer-reviewed)abstract
- A vital requirement for all-air ventilation systems are their functionality to operate both in cooling and heating mode. This article experimentally investigates two newly designed air distribution systems, corner impinging jet (CIJV) and hybrid displacement ventilation (HDV) in comparison against a mixing type air distribution system. These three different systems are examined and compared to one another to evaluate their performance based on local thermal comfort and ventilation effectiveness when operating in heating mode. The evaluated test room is an office environment with two workstations. One of the office walls, which has three windows, faces a cold climate chamber. The results show that CIJV and HDV perform similar to a mixing ventilation in terms of ventilation effectiveness close to the workstations. As for local thermal comfort evaluation, the results show a small advantage for CIJV in the occupied zone. Comparing C2-CIJV to C2-CMV the average draught rate (DR) in the occupied zone is 0.3% for C2-CIJV and 5.3% for C2-CMV with the highest difference reaching as high as 10% at the height of 1.7 m. The results indicate that these systems can perform as well as mixing ventilation when used in offices that require moderate heating. The results also show that downdraught from the windows greatly impacts on the overall airflow and temperature pattern in the room.
|
|
3. |
- Ameen, Arman, et al.
(author)
-
Experimental investigation of ventilation performance of different air distribution systems in an office environment – cooling mode
- 2019
-
In: Energies. - : MDPI. - 1996-1073. ; 12:7
-
Journal article (peer-reviewed)abstract
- The performance of a newly designed corner impinging jet air distribution method with an equilateral triangle cross section was evaluated experimentally and compared to that of two more traditional methods (mixing and displacement ventilation). At nine evenly chosen positions with four standard vertical points, air velocity, turbulence intensity, temperature, and tracer gas decay measurements were conducted for all systems. The results show that the new method behaves as a displacement ventilation system, with high air change effectiveness and stratified flow pattern and temperature field. Both local air change effectiveness and air exchange effectiveness of the corner impinging jet showed high quality and promising results, which is a good indicator of ventilation effectiveness. The results also indicate that there is a possibility to slightly lower the airflow rates for the new air distribution system, while still meeting the requirements for thermal comfort and indoor air quality, thereby reducing fan energy usage. The draught rate was also lower for corner impinging jet compared to the other tested air distribution methods. The findings of this research show that the corner impinging jet method can be used for office ventilation.
|
|
4. |
- Ameen, Arman, 1976-, et al.
(author)
-
Numerical investigation of indoor thermal comfort and air quality for an office equipped with corner impinging jet ventilation
- 2023
-
In: Advances in Building Energy Research. - : Taylor & Francis. - 1751-2549 .- 1756-2201. ; 17:5, s. 578-604
-
Journal article (peer-reviewed)abstract
- This study investigates the feasibility of using only corner impinging jet ventilation (CIJV) for heating and cooling a medium-sized office space with two occupants while maintaining adequate indoor thermal comfort and air quality compared to traditional mixing ventilation systems. This study examines what impact various outdoor temperatures, ranging from −15°C to 25°C, have on an office environment in terms of indoor thermal comfort and air quality. Three different workspace positions were evaluated. The results show that the CIJV system meets the ASHRAE thermal comfort standards for all three positions. In terms of indoor air quality, CIJV performs better than traditional mixing systems, with improved mean age of air and ACE values. This study concludes that CIJV can be used both close and far away from the supply inlets and still provide adequate indoor thermal comfort and air quality during both cooling and heating season.
|
|
5. |
- Arghand, Taha, et al.
(author)
-
An experimental investigation of the flow and comfort parameters for under-floor, confluent jets and mixing ventilation systems in an open-plan office
- 2015
-
In: Building and Environment. - : Elsevier BV. - 0360-1323 .- 1873-684X. ; 92, s. 48-60
-
Journal article (peer-reviewed)abstract
- There is a new trend to convert the workplaces from individual office rooms to open offices for motivating money saving and better communication. With such a shift the ability of existing ventilation systems in meeting the new requirements is a challenging question for researchers. The available options could have an impact on workers' health in terms of providing acceptable levels of thermalcomfort and indoor air quality. Thus, this experimental investigation focuses on the performances of three different air distribution systems in an open-plan office space. The investigated systems were: mixing ventilation with ceiling-mounted inlets, confluent jets ventilation and underfloor air distribution with straight and curved vanes. Although this represents a small part of our more extensiveexperimental investigation, the results show that all the purposed stratified ventilation systems (CJV and UFAD) were more or less behaving as mixing systems with some tendency for displacement effects. Nevertheless, it is known that the mixing systems have a stable flow pattern but has the disadvantage of mixing contaminated air with the fresh supplied air which may produce lower performance and in worst cases occupants' illness. For the open-plan office we studied here, it will be shown that the new systems are capable of performing better than the conventional mixing systems. As expected, the higher air exchange efficiency in combination with lower local mean age of air for corner-mounted CJV and floor-mounted UFAD grills systems indicates that these systems are suitable for open-plan offices and are to be favored over conventional mixing systems.
|
|
6. |
- Cehlin, Mathias, Doktor, 1974-, et al.
(author)
-
Comparing thermal comfort and air quality performance of two active chilled beam systems in an open-plan office
- 2019
-
In: Journal of Building Engineering. - : Elsevier. - 2352-7102. ; 22, s. 56-65
-
Journal article (peer-reviewed)abstract
- The traditional air distribution and supply devices in ventilated rooms are not always able to effectively remove excess heat from the space. Therefore, chilled beams, especially the active systems, are used to achieve the desired cooling demand. The focus of this paper was the potential benefit of a newly designed active chilled beam (ACB) system, to improve heat removal effectiveness local thermal condition and indoor air quality in the occupants’ breathing zone. The system based on 1-way flow design (1W-ACB) was installed in an open-plan office and its performance was studied by analysing the temperatures, velocities and tracer gas concentrations in predetermined risky zones. The system was compared against a traditional 4-way flow design (4W-ACB).The obtained results showed that heat removal effectiveness was slightly higher for the 1W-ACB system compared to the 4W-ACB system. The local thermal condition was very good close to the workstations when using 1W-ACB. The benefits of the new system were also shown in the occupied zone by analysing the mean age of air and air-change effectiveness (ACE) in the breathing level at the workstation locations. The 1W-ACB system provided air with lower mean age (fresher air), and therefore higher ACE, near the breathing zone at the workstations compared to the 4W-ACB. On the other hand, the 4W-ACB system had the advantage of providing high thermal and mean age of air uniformity throughout the room.
|
|
7. |
|
|
8. |
|
|
9. |
- Cho, Y-J, et al.
(author)
-
Theoretical and experimental investigation of wall confluent jets ventilation and comparison with wall displacement ventilation
- 2008
-
In: Building and Environment. - : Elsevier BV. - 0360-1323 .- 1873-684X. ; 43:6, s. 1091-1100
-
Journal article (peer-reviewed)abstract
- This paper reports CFD and experimental results of the characteristics of wall confluent jets in a room. The results presented show the behaviour of wall confluent jets in the form of velocity profiles, the spreading rate of jets on the surface, jets decay, etc. The empirical equations derived are compared with other types of air jets. In addition, the flow in wall confluent jets is compared with the flow in displacement ventilation supply, with regards to the vertical and horizontal spreading on the floor. It is concluded that the jet momentum of wall confluent jets can be more conserved than other jets. Thus, wall confluent jets have a greater spread over the floor than displacement flow. (C) 2007 Elsevier Ltd. All rights reserved.
|
|
10. |
|
|