1. |
- Klarbring, Johan, et al.
(author)
-
Ionic conductivity in Sm-doped ceria from first-principles non-equilibrium molecular dynamics
- 2016
-
In: Solid State Ionics. - : Elsevier. - 0167-2738 .- 1872-7689. ; 296, s. 47-53
-
Journal article (peer-reviewed)abstract
- Sm-doped ceria is a prospective electrolyte material for intermediate-temperature solid-oxide fuel cells (IT-SOFC). Equi- librium ab initio molecular dynamics (AIMD) studies of oxygen ion diffusion in this material are currently impractical due to the rareness of diffusive events on the accessible timescale. To overcome this issue we have performed ab ini- tio non-equilibrium molecular dynamics calculations of Sm-doped ceria using the color-diffusion algorithm. Applying an external force field we have been able to increase the frequency of diffusive events over the simulation time, while keeping the physical mechanism of diffusion intact. We have investigated the temperature dependence of the maximum strength of the applied external field that could be used while maintaining the response of the system in a linear regime. This allows one to obtain the diffusivity at zero field. The bulk ionic conductivity has been calculated and found to match the experimental data well. We have also compared the description of the diffusion process by our method to previous findings and show that the migration mechanism and site preference of oxygen vacancies with respect to the Sm dopants is well reproduced.
|
|
2. |
- Nilsson, Johan O., et al.
(author)
-
Ionic conductivity in Gd-doped CeO2 : Ab initio color-diffusion nonequilibrium molecular dynamics study
- 2016
-
In: Physical Review B. Condensed Matter and Materials Physics. - : American Physical Society. - 1098-0121 .- 1550-235X. ; 93:2, s. 024102-
-
Journal article (peer-reviewed)abstract
- A first-principles nonequilibrium molecular dynamics (NEMD) study employing the color-diffusion algorithm has been conducted to obtain the bulk ionic conductivity and the diffusion constant of gadolinium-doped cerium oxide (GDC) in the 850-1150 K temperature range. Being a slow process, ionic diffusion in solids usually requires simulation times that are prohibitively long for ab initio equilibrium molecular dynamics. The use of the color-diffusion algorithm allowed us to substantially speed up the oxygen-ion diffusion. The key parameters of the method, such as field direction and strength as well as color-charge distribution, have been investigated and their optimized values for the considered system have been determined. The calculated ionic conductivity and diffusion constants are in good agreement with available experimental data.
|
|
3. |
- Baldwin, William J., et al.
(author)
-
Dynamic Local Structure in Caesium Lead Iodide: Spatial Correlation and Transient Domains
- 2023
-
In: Small. - : WILEY-V C H VERLAG GMBH. - 1613-6810 .- 1613-6829.
-
Journal article (peer-reviewed)abstract
- Metal halide perovskites are multifunctional semiconductors with tunable structures and properties. They are highly dynamic crystals with complex octahedral tilting patterns and strongly anharmonic atomic behavior. In the higher temperature, higher symmetry phases of these materials, several complex structural features are observed. The local structure can differ greatly from the average structure and there is evidence that dynamic 2D structures of correlated octahedral motion form. An understanding of the underlying complex atomistic dynamics is, however, still lacking. In this work, the local structure of the inorganic perovskite CsPbI3 is investigated using a new machine learning force field based on the atomic cluster expansion framework. Through analysis of the temporal and spatial correlation observed during large-scale simulations, it is revealed that the low frequency motion of octahedral tilts implies a double-well effective potential landscape, even well into the cubic phase. Moreover, dynamic local regions of lower symmetry are present within both higher symmetry phases. These regions are planar and the length and timescales of the motion are reported. Finally, the spatial arrangement of these features and their interactions are investigated and visualized, providing a comprehensive picture of local structure in the higher symmetry phases.
|
|
4. |
- Cohen, Adi, et al.
(author)
-
Diverging Expressions of Anharmonicity in Halide Perovskites
- 2022
-
In: Advanced Materials. - : Wiley-V C H Verlag GMBH. - 0935-9648 .- 1521-4095. ; 34:14
-
Journal article (peer-reviewed)abstract
- Lead-based halide perovskite crystals are shown to have strongly anharmonic structural dynamics. This behavior is important because it may be the origin of their exceptional photovoltaic properties. The double perovskite, Cs2AgBiBr6, has been recently studied as a lead-free alternative for optoelectronic applications. However, it does not exhibit the excellent photovoltaic activity of the lead-based halide perovskites. Therefore, to explore the correlation between the anharmonic structural dynamics and optoelectronic properties in lead-based halide perovskites, the structural dynamics of Cs2AgBiBr6 are investigated and are compared to its lead-based analog, CsPbBr3. Using temperature-dependent Raman measurements, it is found that both materials are indeed strongly anharmonic. Nonetheless, the expression of their anharmonic behavior is markedly different. Cs2AgBiBr6 has well-defined normal modes throughout the measured temperature range, while CsPbBr3 exhibits a complete breakdown of the normal-mode picture above 200 K. It is suggested that the breakdown of the normal-mode picture implies that the average crystal structure may not be a proper starting point to understand the electronic properties of the crystal. In addition to our main findings, an unreported phase of Cs2AgBiBr6 is also discovered below approximate to 37 K.
|
|
5. |
- Ekström, Erik, et al.
(author)
-
The effects of microstructure, Nb content and secondary Ruddlesden-Popper phase on thermoelectric properties in perovskite CaMn1-xNbxO3 (x=0-0.10) thin films
- 2020
-
In: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 10:13, s. 7918-7926
-
Journal article (peer-reviewed)abstract
- CaMn1-xNbxO3 (x = 0, 0.5, 0.6, 0.7 and 0.10) thin films have been grown by a two-step sputtering/annealing method. First, rock-salt-structured (Ca,Mn1-x,Nb-x)O thin films were deposited on 11 & x304;00 sapphire using reactive RF magnetron co-sputtering from elemental targets of Ca, Mn and Nb. The CaMn1-xNbxO3 films were then obtained by thermally induced phase transformation from rock-salt-structured (Ca,Mn1-xNbx)O to orthorhombic during post-deposition annealing at 700 degrees C for 3 h in oxygen flow. The X-ray diffraction patterns of pure CaMnO3 showed mixed orientation, while Nb-containing films were epitaxially grown in [101] out of-plane-direction. Scanning transmission electron microscopy showed a Ruddlesden-Popper (R-P) secondary phase in the films, which results in reduction of the electrical and thermal conductivity of CaMn1-xNbxO3. The electrical resistivity and Seebeck coefficient of the pure CaMnO3 film were measured to 2.7 omega cm and -270 mu V K-1 at room temperature, respectively. The electrical resistivity and Seebeck coefficient were reduced by alloying with Nb and was measured to 0.09 omega cm and -145 mu V K-1 for x = 0.05. Yielding a power factor of 21.5 mu W K-2 m(-1) near room temperature, nearly eight times higher than for pure CaMnO3 (2.8 mu W K-2 m(-1)). The power factors for alloyed samples are low compared to other studies on phase-pure material. This is due to high electrical resistivity originating from the secondary R-P phase. The thermal conductivity of the CaMn1-xNbxO3 films is low for all samples and is the lowest for x = 0.07 and 0.10, determined to 1.6 W m(-1) K-1. The low thermal conductivity is attributed to grain boundary scattering and the secondary R-P phase.
|
|
6. |
- Filippov, Stanislav, et al.
(author)
-
Analysis of Dihydrogen Bonding in Ammonium Borohydride
- 2019
-
In: Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 123:47, s. 28631-28639
-
Journal article (peer-reviewed)abstract
- The structural and vibrational properties of ammonium borohydride, NH4BH4, have been examined by first-principles density functional theory (DFT) calculations and inelastic neutron scattering (INS). The H disordered crystal structure of NH4BH4 is composed of the tetrahedral complex ions NH4+ and BH4-, which are arranged as in the fcc NaCl structure and linked by intermolecular dihydrogen bonding. Upon cooling, the INS spectra revealed a structural transition between 45 and 40 K. The reversible transition occurs upon heating between 46 and 49 K. In the low-temperature form reorientational dynamics are frozen. The libration modes for BH4- and NH4+ are near 300 and 200 cm(-1), respectively. Upon entering the fcc high-temperature form, NH4+ ions attain fast reorientational dynamics, as indicated in the disappearance of the NH4+ libration band, whereas BH4- ions become significantly mobile only at temperatures above 100 K. The vibrational behavior of BH4- ions in NH4BH4 compares well to the heavier alkali metal borohydrides, NaBH4-CsBH4. DFT calculations revealed a nondirectional nature of the dihydrogen bonding in NH4BH4 with only weak tendency for long-range order. Different rotational configurations of complex ions appear quasi-degenerate, which is reminiscent of glasses.
|
|
7. |
- Filippov, Stanislav, et al.
(author)
-
Temperature-induced phase transition and Li self-diffusion in Li2C2: A first-principles study
- 2019
-
In: Physical Review Materials. - : AMER PHYSICAL SOC. - 2475-9953. ; 3:2
-
Journal article (peer-reviewed)abstract
- Lithium carbide, Li2C2, is a fascinating material that combines strong covalent and weak ionic bonding resulting in a wide range of unusual properties. The mechanism of its phase transition from the ground-state orthorhombic (Immm) to the high-temperature cubic (Fm (3) over barm) crystal structure is not well understood and here we elucidate it with help of first-principles calculations. We show that stabilization of the cubic phase is a result of a temperature-induced disorientation of the C-C dumbbells and their further thermal rotations. Due to these rotations rather large deviatoric stress, which is associated with the dumbbell alignment along one of the crystallographic axes, averages out making the cubic structure mechanically stable. At high temperature we observe a type-II superionic transition to a state of high Li self-diffusion involving collective ionic motion mediated by the formation of Frenkel pairs.
|
|
8. |
- Gambino, Davide, et al.
(author)
-
Phase stability of Fe from first principles: Atomistic spin dynamics coupled with ab initio molecular dynamics simulations and thermodynamic integration
- 2023
-
In: Physical Review B. - : AMER PHYSICAL SOC. - 2469-9950 .- 2469-9969. ; 107:1
-
Journal article (peer-reviewed)abstract
- The calculation of free energies from first principles enables the prediction of phase stability of materials with high accuracy; these calculations are complicated in magnetic materials by the interplay of electronic, magnetic, and vibrational degrees of freedom. In this work, we show the feasibility and accuracy of the calculation of phase stability in magnetic systems with ab initio methods and thermodynamic integration by sampling the magnetic and vibrational phase space with coupled atomistic spin dynamics-ab initio molecular dynamics simulations [Stockem et al., PRL 121, 125902 (2018)], where energies and interatomic forces are calculated with density functional theory. We employ the method to calculate the phase stability of Fe at ambient pressure from 800 up to 1800 K. The Gibbs free energy difference between fcc and bcc Fe at zero pressure is calculated with thermodynamic integration over temperature and over stress-strain variables and, for the best set of exchange interactions employed, the Gibbs free energy difference between the two structures is within 5 meV/atom from the CALPHAD estimate, corresponding to an error in transition temperature below 150 K. The present work paves the way to free energy calculations in magnetic materials from first principles with accuracy in the order of 1 meV/atom.
|
|
9. |
- Geuchies, Jaco J., et al.
(author)
-
Anisotropic Electron-Phonon Interactions in 2D Lead-Halide Perovskites
- 2024
-
In: Nano Letters. - : AMER CHEMICAL SOC. - 1530-6984 .- 1530-6992. ; 24:28, s. 8642-8649
-
Journal article (peer-reviewed)abstract
- Two-dimensional (2D) hybrid organic-inorganic metal halide perovskites offer enhanced stability for perovskite-based applications. Their crystal structure's soft and ionic nature gives rise to strong interaction between charge carriers and ionic rearrangements. Here, we investigate the interaction of photogenerated electrons and ionic polarizations in single-crystal 2D perovskite butylammonium lead iodide (BAPI), varying the inorganic lamellae thickness in the 2D single crystals. We determine the directionality of the transition dipole moments (TDMs) of the relevant phonon modes (in the 0.3-3 THz range) by the angle- and polarization-dependent THz transmission measurements. We find a clear anisotropy of the in-plane photoconductivity, with a similar to 10% reduction along the axis parallel with the transition dipole moment of the most strongly coupled phonon. Detailed calculations, based on Feynman polaron theory, indicate that the anisotropy originates from directional electron-phonon interactions.
|
|
10. |
- Haveroth, G. A., et al.
(author)
-
Topology optimization including a model of the layer-by-layer additive manufacturing process
- 2022
-
In: Computer Methods in Applied Mechanics and Engineering. - : ELSEVIER SCIENCE SA. - 0045-7825 .- 1879-2138. ; 398
-
Journal article (peer-reviewed)abstract
- A topology optimization formulation including a model of the layer-by-layer additive manufacturing (AM) process is considered. Defined as a multi-objective minimization problem, the formulation accounts for the performance and cost of both the final and partially manufactured designs and allows for considering AM-related issues such as overhang and residual stresses in the optimization. The formulation is exemplified by stiffness optimization in which the overhang is limited by adding mechanical or thermal compliance as a measure of the cost of partially manufactured designs. Convergence of the model as the approximate layer-by-layer model is refined is shown theoretically, and an extensive numerical study indicates that this convergence can be fast, thus making it a computationally viable approach useful for including AM-related issues into topology optimization. The examples also show that drips and sharp corners associated with some geometry-based formulations for overhang limitation can be avoided. The codes used in this article are written in Python using only open sources libraries and are available for reference.
|
|