| 1. |
- Stenlund, Patrik, et al.
(author)
-
Osseointegration Enhancement by Zr doping of Co-Cr-Mo Implants Fabricated by Electron Beam Melting
- 2015
-
In: Additive Manufacturing. - : Elsevier BV. - 2214-8604 .- 2214-7810. ; 6, s. 6-15
-
Journal article (peer-reviewed)abstract
- Direct osseous healing to prosthetic components is a prerequisite for the clinical success of uncemented treatment in total hip replacements (THR). The demands imposed on the material properties are constantly being stepped up to withstand the impact of an active lifestyle and ensure lifelong integration. Cobalt–chromium–molybdenum (Co-Cr-Mo) materials are interesting for their excellent mechanical stability, corrosion resistance and possibility to be produced by additive manufacturing into complex designs with modifiable stiffness. The bone response to Co-Cr-Mo is regarded as inferior to that of titanium and are usually cemented in THR. The hypothesis in the present study was that a low amount of Zr in the Co-Cr-Mo alloy would improve the bone response and biomechanical anchorage. The results showed significantly higher implant stability for the Co-Cr-Mo alloy with an addition of 0.04% Zr after eight weeks of healing in rabbits, while no major differences were observed in the amount of bone formed around the implants. Further, bone tissue grew into surface irregularities and in direct contact with the implant surfaces. It is concluded that additively manufactured Co-Cr-Mo alloy implants osseointegrate and that the addition of a low amount of Zr to the bulk Co-Cr-Mo further improves the bone anchorage.
|
|
| 2. |
- Wei, Daixiu, et al.
(author)
-
Novel Co-rich high entropy alloys with superior tensile properties
- 2019
-
In: Materials Research Letters. - : Taylor & Francis. - 2166-3831. ; 7:2, s. 82-88
-
Journal article (peer-reviewed)abstract
- We developed a series of Co-rich CoxCr25(FeNi)(75-x) (x = 35, 45, 55, 65) high entropy alloys with improved strength and/or ductility, derived from lowering the stacking fault energy (SFE) and reducing the fcc phase stability of the equiatomic CoCrFeNi alloy. Thermodynamics and ab initio calculations demonstrated that increasing Co while decreasing Fe and Ni concentrations lower the SFE and reduce the fcc phase stability. The Co35Cr25Fe20Ni20 and Co45Cr25Fe15Ni15 alloys with single fcc phase, exhibit superior tensile properties, contributing to the twinning and fcc -> hcp martensitic transformation. The present study offers a guideline for designing high-performance high entropy alloys. [GRAPHICS] IMPACT STATEMENT A series of novel Co-rich non-equiatomic high entropy alloys with enhanced tensile properties were developed by lowering the stacking fault energy and reducing the phase stability of equiatomic CoCrFeNi alloy.
|
|
| 3. |
- Wei, Daixiu, et al.
(author)
-
Si-addition contributes to overcoming the strength-ductility trade-off in high-entropy alloys
- 2022
-
In: International journal of plasticity. - : Elsevier BV. - 0749-6419 .- 1879-2154. ; 159
-
Journal article (peer-reviewed)abstract
- Face-centered cubic single-phase high-entropy alloys (HEAs) containing multi-principal transition metals have attracted significant attention, exhibiting an unprecedented combination of strength and ductility owing to their low stacking fault energy (SFE) and large misfit parameter that creates severe local lattice distortion. Increasing both strength and ductility further is challenging. In the present study, we demonstrate via meticulous experiments that the CoCrFeNi HEA with the addition of the substitutional metalloid Si can retain a single-phase FCC structure while its yield strength (up to 65%), ultimate strength (up to 34%), and ductility (up to 15%) are simultaneously increased, owing to a synthetical effect of the enhanced solid solution strengthening and a reduced SFE. The dislocation behaviors and plastic deformation mechanisms were tuned by the addition of Si, which improves the strain hardening and tensile ductility. The present study provides new strategies for enhancing HEA performance by targeted metalloid additions.
|
|
