1. |
- Kuzmenko, Volodymyr, 1987, et al.
(author)
-
Universal method for protein bioconjugation with nanocellulose scaffolds for increased cell adhesion
- 2013
-
In: Materials Science and Engineering C. - : Elsevier BV. - 0928-4931 .- 1873-0191. ; 33:8, s. 4599-4607
-
Journal article (peer-reviewed)abstract
- Bacterial nanocellulose (BNC) is an emerging biomaterial since it is biocompatible, integrates well with host tissue and can be biosynthesized in desired architecture. However, being a hydrogel, it exhibits low affinity for cell attachment, which is crucial for the cellular fate process. To increase cell attachment, the surface of BNC scaffolds was modified with two proteins, fibronectin and collagen type I, using an effective bioconjugation method applying 1-cyano-4-dimethylaminopyridinium (CDAP) tetrafluoroborate as the intermediate catalytic agent. The effect of CDAP treatment on cell adhesion to the BNC surface is shown for human umbilical vein endothelial cells and the mouse mesenchymal stem cell line C3H10T1/2. In both cases, the surface modification increased the number of cells attached to the surfaces. In addition, the morphology of the cells indicated more healthy and viable cells. CDAP activation of bacterial nanocellulose is shown to be a convenient method to conjugate extracellular proteins to the scaffold surfaces. CDAP treatment can be performed in a short period of time in an aqueous environment under heterogeneous and mild conditions preserving the nanofibrillar network of cellulose.
|
|
2. |
- van Zyl, Martin, et al.
(author)
-
Injectable conductive hydrogel restores conduction through ablated myocardium
- 2020
-
In: Journal of Cardiovascular Electrophysiology. - : Wiley. - 1045-3873 .- 1540-8167. ; 31:12, s. 3293-3301
-
Journal article (peer-reviewed)abstract
- Introduction Therapies for substrate-related arrhythmias include ablation or drugs targeted at altering conductive properties or disruption of slow zones in heterogeneous myocardium. Conductive compounds such as carbon nanotubes may provide a novel personalizable therapy for arrhythmia treatment by allowing tissue homogenization. Methods A nanocellulose carbon nanotube-conductive hydrogel was developed to have conduction properties similar to normal myocardium. Ex vivo perfused canine hearts were studied. Electroanatomic activation mapping of the epicardial surface was performed at baseline, after radiofrequency ablation, and after uniform needle injections of the conductive hydrogel through the injured tissue. Gross histology was used to assess distribution of conductive hydrogel in the tissue. Results The conductive hydrogel viscosity was optimized to decrease with increasing shear rate to allow expression through a syringe. The direct current conductivity under aqueous conduction was 4.3 x 10(-1) S/cm. In four canine hearts, when compared with the homogeneous baseline conduction, isochronal maps demonstrated sequential myocardial activation with a shift in direction of activation to surround the edges of the ablated region. After injection of the conductive hydrogel, isochrones demonstrated conduction through the ablated tissue with activation restored through the ablated tissue. Gross specimen examination demonstrated retention of the hydrogel within the tissue. Conclusions This proof-of-concept study demonstrates that conductive hydrogel can be injected into acutely disrupted myocardium to restore conduction. Future experiments should focus on evaluating long-term retention and biocompatibility of the hydrogel through in vivo experimentation.
|
|
3. |
- Wang, Nan, 1988, et al.
(author)
-
Efficient surface modification of carbon nanotubes for fabricating high performance CNT based hybrid nanostructures
- 2017
-
In: Carbon. - : Elsevier BV. - 0008-6223. ; 111, s. 402-410
-
Journal article (peer-reviewed)abstract
- Carbon nanotubes (CNTs) were chemically modified to achieve strong binding strength with the attached functional components as well as good dispersability and nanoparticle size-uniformity. An efficient multi-oxidation process was developed to create porous out layer with many nanoscale defects on the surface of CNTs for metallic nanoparticle close attachment and bond sufficient oxygen-containing groups, which assisted the dispersion of CNTs in the aqueous solution. The surface modified CNTs have advantages of strong binding capability, large surface area, high mechanical strength and good dispersability, which show great potential as building blocks for hybrid nanomaterials. Monodispersed silver nano particles with an average size of 3 nm were formed from inside the created nanoscale defects on the surface of CNTs without any obvious agglomerations. The fabricated hybrid exhibited much enhanced anti-bacterial performance compared to commercial silver nanoparticles due to the combined antibacterial effects of CNTs and silver nanoparticles. With these superior properties, the developed surface modification process could be widely used for improving the performances of many CNT based hybrid nanomaterials in diverse applications.
|
|
4. |
|
|
5. |
|
|
6. |
- Bordoni, Matteo, et al.
(author)
-
3D Printed Conductive Nanocellulose Scaffolds for the Differentiation of Human Neuroblastoma Cells
- 2020
-
In: Cells. - : MDPI AG. - 2073-4409. ; 9:3
-
Journal article (peer-reviewed)abstract
- We prepared cellulose nanofibrils-based (CNF), alginate-based and single-walled carbon nanotubes (SWCNT)-based inks for freeform reversible embedding hydrogel (FRESH) 3D bioprinting of conductive scaffolds. The 3D printability of conductive inks was evaluated in terms of their rheological properties. The differentiation of human neuroblastoma cells (SH-SY5Y cell line) was visualized by the confocal microscopy and the scanning electron microscopy techniques. The expression of TUBB3 and Nestin genes was monitored by the RT-qPCR technique. We have demonstrated that the conductive guidelines promote the cell differentiation, regardless of using differentiation factors. It was also shown that the electrical conductivity of the 3D printed scaffolds could be tuned by calcium-induced crosslinking of alginate, and this plays a significant role on neural cell differentiation. Our work provides a protocol for the generation of a realistic in vitro 3D neural model and allows for a better understanding of the pathological mechanisms of neurodegenerative diseases.
|
|
7. |
- Haque, Mohammad Mazharul, 1984, et al.
(author)
-
Ionic liquid electrolyte for supercapacitor with high temperature compatibility
- 2017
-
In: Journal of Physics: Conference Series. - : IOP Publishing. - 1742-6588 .- 1742-6596. ; 922:1
-
Conference paper (peer-reviewed)abstract
- This work describes the electrochemical investigation of two ionic liquids (ILs), 1-ethyl-3-methylimidazolium acetate (EMIM Ac) and 1-butyl-3-methylimidazolium chloride (BMIM Cl), as electrolytes in supercapacitors (SC). A comprehensive study on high temperature (HT) endurance that is required for system integration in microelectronics has also been carried out. It has been found that EMIM Ac containing SC performs better than a BMIM Cl containing SC, and HT treatment improves the capacitive performance.
|
|
8. |
- Haque, Mohammad Mazharul, 1984, et al.
(author)
-
Self-discharge and leakage current mitigation of neutral aqueous-based supercapacitor by means of liquid crystal additive
- 2020
-
In: Journal of Power Sources. - : Elsevier BV. - 0378-7753. ; 453
-
Journal article (peer-reviewed)abstract
- Self-discharge is being recognized as one of the main obstacles to implementing the supercapacitor (SC) in standalone self-powered systems. Strategies for addressing this issue include the modification of electrodes, electrolytes, separators, and diverse device configurations. However, an improved self-discharge behavior is often achieved with a large compromise on other prominent figures of merit such as capacitance, energy density, or cycle life of the device. In this work, a thorough comparative electrochemical investigation of SCs containing a neutral aqueous electrolyte, 1 M Li2SO4, and with a liquid crystal (LC) additive, 2% 4-n-pentyl-4′-cyanobiphenyl (5CB) in 1 M Li2SO4, has been carried out at different states of charge. The results demonstrate that the device containing the LC additive 5CB exhibits a reduced self-discharge and leakage current without compromising the capacitive performance at different nominal voltages compared to the behavior of the device without 5CB. We suggest an explanation of the difference of the self-discharge behavior between the devices through tunability of the effective conductivity of the electrolyte composite upon applied voltages. As a result, in an open circuit condition, the device containing LC shows a slower diffusion of ions that facilitates a decreased self-discharge and leakage current.
|
|
9. |
- Haque, Mohammad Mazharul, 1984, et al.
(author)
-
Thermal influence on the electrochemical behavior of a supercapacitor containing an ionic liquid electrolyte
- 2018
-
In: Electrochimica Acta. - : Elsevier BV. - 0013-4686. ; 263, s. 249-260
-
Journal article (peer-reviewed)abstract
- Emerging demands on heat-durable electronics have accelerated the need for high temperature supercapacitors as well as for understanding the influence of elevated temperatures on the capacitive behavior. In this work, we present a comprehensive study of the thermal influence on a supercapacitor containing 1-ethyl-3-methylimidazolium acetate (EMIM Ac) electrolyte and activated carbon (AC) electrodes. The performance variation as a function of temperature in a range from 21 °C to 150 °C reveals that a high specific capacitance of 142 F g−1 can be achieved at 150 °C at a current density of 2 A g−1 with a rate capability of 87% at 15 A g−1 (relative to 2 A g−1). At 150 °C, equivalent series resistance (ESR) is only 0.37 Ω cm2, which is a result of improved ionic conductivity of the electrolyte at elevated temperature. The ESR value of 2.5 Ω cm2 at room temperature reflects a good compatibility between EMIM Ac and AC. In addition, a capacitance retention of more than 95% (in the end of 1000 cycles) is maintained up to120 °C followed by 85% at 150 °C. These results confirm EMIM Ac as a suitable candidate for carbon-based high temperature supercapacitors, and the observations regarding the thermal influence on performance metrics e.g. usable operation voltage could be applicable to other energy storage devices.
|
|
10. |
- Håkansson, Karl, 1984, et al.
(author)
-
Solidification of 3D printed nanofibril hydrogels into functional 3D cellulose structures
- 2016
-
In: Advanced Materials Technologies. - : Wiley. - 2365-709X. ; 1:7, s. 1600096-
-
Journal article (peer-reviewed)abstract
- Cellulose nanofibrils isolated from trees have the potential to be used as raw material for future sustainable products within the areas of packaging, textiles, biomedical devices, and furniture. However, one unsolved problem has been to convert the nanofibril-hydrogel into a dry 3D structure. In this study, 3D printing is used to convert a cellulose nanofibril hydrogel into 3D structures with controlled architectures. Such structures collapse upon drying, but by using different drying processes the collapse can be controlled and the 3D structure can be preserved upon solidification. In addition, a conductive cellulose nanofibril ink is fabricated by adding carbon nanotubes. These findings enable the use of wood derived materials in 3D printing for fabrication of sustainable commodities such as packaging, textiles, biomedical devices, and furniture with conductive parts. Furthermore, with the introduction of biopolymers into 3D printing, the 3D printing technology itself can finally be regarded as sustainable.
|
|