1. |
- Alvfors, Per, 1954-, et al.
(author)
-
Research and development challenges for Swedish biofuel actors – three illustrative examples : Improvement potential discussed in the context of Well-to-Tank analyses
- 2010
-
Reports (other academic/artistic)abstract
- Currently biofuels have strong political support, both in the EU and Sweden. The EU has, for example, set a target for the use of renewable fuels in the transportation sector stating that all EU member states should use 10% renewable fuels for transport by 2020. Fulfilling this ambition will lead to an enormous market for biofuels during the coming decade. To avoid increasing production of biofuels based on agriculture crops that require considerable use of arable area, focus is now to move towards more advanced second generation (2G) biofuels that can be produced from biomass feedstocks associated with a more efficient land use. Climate benefits and greenhouse gas (GHG) balances are aspects often discussed in conjunction with sustainability and biofuels. The total GHG emissions associated with production and usage of biofuels depend on the entire fuel production chain, mainly the agriculture or forestry feedstock systems and the manufacturing process. To compare different biofuel production pathways it is essential to conduct an environmental assessment using the well-to-tank (WTT) analysis methodology. In Sweden the conditions for biomass production are favourable and we have promising second generation biofuels technologies that are currently in the demonstration phase. In this study we have chosen to focus on cellulose based ethanol, methane from gasification of solid wood as well as DME from gasification of black liquor, with the purpose of identifying research and development potentials that may result in improvements in the WTT emission values. The main objective of this study is thus to identify research and development challenges for Swedish biofuel actors based on literature studies as well as discussions with the the researchers themselves. We have also discussed improvement potentials for the agriculture and forestry part of the WTT chain. The aim of this study is to, in the context of WTT analyses, (i) increase knowledge about the complexity of biofuel production, (ii) identify and discuss improvement potentials, regarding energy efficiency and GHG emissions, for three biofuel production cases, as well as (iii) identify and discuss improvement potentials regarding biomass supply, including agriculture/forestry. The scope of the study is limited to discussing the technologies, system aspects and climate impacts associated with the production stage. Aspects such as the influence on biodiversity and other environmental and social parameters fall beyond the scope of this study. We find that improvement potentials for emissions reductions within the agriculture/forestry part of the WTT chain include changing the use of diesel to low-CO2-emitting fuels, changing to more fuel-efficient tractors, more efficient cultivation and manufacture of fertilizers (commercial nitrogen fertilizer can be produced in plants which have nitrous oxide gas cleaning) as well as improved fertilization strategies (more precise nitrogen application during the cropping season). Furthermore, the cultivation of annual feedstock crops could be avoided on land rich in carbon, such as peat soils and new agriculture systems could be introduced that lower the demand for ploughing and harrowing. Other options for improving the WTT emission values includes introducing new types of crops, such as wheat with higher content of starch or willow with a higher content of cellulose. From the case study on lignocellulosic ethanol we find that 2G ethanol, with co-production of biogas, electricity, heat and/or wood pellet, has a promising role to play in the development of sustainable biofuel production systems. Depending on available raw materials, heat sinks, demand for biogas as vehicle fuel and existing 1G ethanol plants suitable for integration, 2G ethanol production systems may be designed differently to optimize the economic conditions and maximize profitability. However, the complexity connected to the development of the most optimal production systems require improved knowledge and involvement of several actors from different competence areas, such as chemical and biochemical engineering, process design and integration and energy and environmental systems analysis, which may be a potential barrier.
|
|
2. |
- Alvfors, Per, et al.
(author)
-
Research and development challenges for Swedish biofuel actors – three illustrative examples
- 2010
-
Reports (other academic/artistic)abstract
- Currently biofuels have strong political support, both in the EU and Sweden. The EU has, for example, set a target for the use of renewable fuels in the transportation sector stating that all EU member states should use 10% renewable fuels for transport by 2020. Fulfilling this ambition will lead to an enormous market for biofuels during the coming decade. To avoid increasing production of biofuels based on agriculture crops that require considerable use of arable area, focus is now to move towards more advanced second generation (2G) biofuels that can be produced from biomass feedstocks associated with a more efficient land use.Climate benefits and greenhouse gas (GHG) balances are aspects often discussed in conjunction with sustainability and biofuels. The total GHG emissions associated with production and usage of biofuels depend on the entire fuel production chain, mainly the agriculture or forestry feedstock systems and the manufacturing process. To compare different biofuel production pathways it is essential to conduct an environmental assessment using the well-to-tank (WTT) analysis methodology. In Sweden the conditions for biomass production are favourable and we have promising second generation biofuels technologies that are currently in the demonstration phase. In this study we have chosen to focus on cellulose based ethanol, methane from gasification of solid wood as well as DME from gasification of black liquor, with the purpose of identifying research and development potentials that may result in improvements in the WTT emission values. The main objective of this study is thus to identify research and development challenges for Swedish biofuel actors based on literature studies as well as discussions with the the researchers themselves. We have also discussed improvement potentials for the agriculture and forestry part of the WTT chain. The aim of this study is to, in the context of WTT analyses, (i) increase knowledge about the complexity of biofuel production, (ii) identify and discuss improvement potentials, regarding energy efficiency and GHG emissions, for three biofuel production cases, as well as (iii) identify and discuss improvement potentials regarding biomass supply, including agriculture/forestry. The scope of the study is limited to discussing the technologies, system aspects and climate impacts associated with the production stage. Aspects such as the influence on biodiversity and other environmental and social parameters fall beyond the scope of this study. We find that improvement potentials for emissions reductions within the agriculture/forestry part of the WTT chain include changing the use of diesel to low-CO2-emitting fuels, changing to more fuel-efficient tractors, more efficient cultivation and manufacture of fertilizers (commercial nitrogen fertilizer can be produced in plants which have nitrous oxide gas cleaning) as well as improved fertilization strategies (more precise nitrogen application during the cropping season). Furthermore, the cultivation of annual feedstock crops could be avoided on land rich in carbon, such as peat soils and new agriculture systems could be introduced that lower the demand for ploughing and harrowing. Other options for improving the WTT emission values includes introducing new types of crops, such as wheat with higher content of starch or willow with a higher content of cellulose. From the case study on lignocellulosic ethanol we find that 2G ethanol, with co-production of biogas, electricity, heat and/or wood pellet, has a promising role to play in the development of sustainable biofuel production systems. Depending on available raw materials, heat sinks, demand for biogas as vehicle fuel and existing 1G ethanol plants suitable for integration, 2G ethanol production systems may be designed differently to optimize the economic conditions and maximize profitability. However, the complexity connected to the development of the most optimal production systems require improved knowledge and involvement of several actors from different competence areas, such as chemical and biochemical engineering, process design and integration and energy and environmental systems analysis, which may be a potential barrier. Three important results from the lignocellulosic ethanol study are: (i) the production systems could be far more complex and intelligently designed than previous studies show, (ii) the potential improvements consist of a large number of combinations of process integration options wich partly depends on specific local conditions, (iii) the environmental performance of individual systems may vary significantly due to systems design and local conditons.From the case study on gasification of solid biomass for the production of biomethane we find that one of the main advantages of this technology is its high efficiency in respect to converting biomass into fuels for transport. For future research we see a need for improvements within the gas up-grading section, including gas cleaning and gas conditioning, to obtain a more efficient process. A major challenge is to remove the tar before the methanation reaction. Three important results from the biomethane study are: (i) it is important not to crack the methane already produced in the syngas, which indicates a need for improved catalysts for selective tar cracking, (ii) there is a need for new gas separation techniques to facilitate the use of air oxidation agent instead of oxygen in the gasifier, and (iii) there is a need for testing the integrated process under realistic conditions, both at atmospheric and pressurized conditions. From the case study on black liquor gasification for the production of DME we find that the process has many advantages compared to other biofuel production options, such as the fact that black liquor is already partially processed and exists in a pumpable, liquid form, and that the process is pressurised and tightly integrated with the pulp mill, which enhances fuel production efficiency. However, to achieve commercial status, some challenges still remain, such as demonstrating that materials and plant equipment meet the high availability required when scaling up to industrial size in the pulp mill, and also proving that the plant can operate according to calculated heat and material balances. Three important results from the DME study are: (i) that modern chemical pulp mills, having a potential surplus of energy, could become important suppliers of renewable fuels for transport, (ii) there is a need to demonstrate that renewable DME/methanol will be proven to function in large scale, and (iii) there is still potential for technology improvements and enhanced energy integration. Although quantitative improvement potentials are given in the three biofuel production cases, it is not obvious how these potentials would affect WTT values, since the biofuel production processes are complex and changing one parameter impacts other parameters. The improvement potentials are therefore discussed qualitatively. From the entire study we have come to agree on the following common conclusions: (i) research and development in Sweden within the three studied 2G biofuel production technologies is extensive, (ii) in general, the processes, within the three cases, work well at pilot and demonstration scale and are now in a phase to be proven in large scale, (iii) there is still room for improvement although some processes have been known for decades, (iv) the biofuel production processes are complex and site specific and process improvements need to be seen and judged from a broad systems perspective (both within the production plant as well as in the entire well-to-tank perspective), and (v) the three studied biofuel production systems are complementary technologies. Futher, the process of conducting this study is worth mentioning as a result itself, i.e. that many different actors within the field have proven their ability and willingness to contribute to a common report, and that the cooperation climate was very positive and bodes well for possible future collaboration within the framework of the f3 center. Finally, judging from the political ambitions it is clear that the demand for renewable fuels will significantly increase during the coming decade. This will most likely result in opportunities for a range of biofuel options. The studied biofuel options all represent 2G biofuels and they can all be part of the solution to meet the increased renewable fuel demand.
|
|
3. |
- Alvors, Per, et al.
(author)
-
Research and development challenges for Swedish biofuel actors – three illustrative examples : Improvement potential discussed in the context of Well-to-Tank analyses
- 2010
-
Reports (other academic/artistic)abstract
- Currently biofuels have strong political support, both in the EU and Sweden. The EU has, for example, set a target for the use of renewable fuels in the transportation sector stating that all EU member states should use 10% renewable fuels for transport by 2020. Fulfilling this ambition will lead to an enormous market for biofuels during the coming decade. To avoid increasing production of biofuels based on agriculture crops that require considerable use of arable area, focus is now to move towards more advanced second generation (2G) biofuels that can be produced from biomass feedstocks associated with a more efficient land use.Climate benefits and greenhouse gas (GHG) balances are aspects often discussed in conjunction with sustainability and biofuels. The total GHG emissions associated with production and usage of biofuels depend on the entire fuel production chain, mainly the agriculture or forestry feedstock systems and the manufacturing process. To compare different biofuel production pathways it is essential to conduct an environmental assessment using the well-to-tank (WTT) analysis methodology.In Sweden the conditions for biomass production are favourable and we have promising second generation biofuels technologies that are currently in the demonstration phase. In this study we have chosen to focus on cellulose based ethanol, methane from gasification of solid wood as well as DME from gasification of black liquor, with the purpose of identifying research and development potentials that may result in improvements in the WTT emission values. The main objective of this study is thus to identify research and development challenges for Swedish biofuel actors based on literature studies as well as discussions with the the researchers themselves. We have also discussed improvement potentials for the agriculture and forestry part of the WTT chain. The aim of this study is to, in the context of WTT analyses, (i) increase knowledge about the complexity of biofuel production, (ii) identify and discuss improvement potentials, regarding energy efficiency and GHG emissions, for three biofuel production cases, as well as (iii) identify and discuss improvement potentials regarding biomass supply, including agriculture/forestry. The scope of the study is limited to discussing the technologies, system aspects and climate impacts associated with the production stage. Aspects such as the influence on biodiversity and other environmental and social parameters fall beyond the scope of this study.We find that improvement potentials for emissions reductions within the agriculture/forestry part of the WTT chain include changing the use of diesel to low-CO2-emitting fuels, changing to more fuel-efficient tractors, more efficient cultivation and manufacture of fertilizers (commercial nitrogen fertilizer can be produced in plants which have nitrous oxide gas cleaning) as well as improved fertilization strategies (more precise nitrogen application during the cropping season). Furthermore, the cultivation of annual feedstock crops could be avoided on land rich in carbon, such as peat soils and new agriculture systems could be introduced that lower the demand for ploughing and harrowing. Other options for improving the WTT emission values includes introducing new types of crops, such as wheat with higher content of starch or willow with a higher content of cellulose.From the case study on lignocellulosic ethanol we find that 2G ethanol, with co-production of biogas, electricity, heat and/or wood pellet, has a promising role to play in the development of sustainable biofuel production systems. Depending on available raw materials, heat sinks, demand for biogas as vehicle fuel and existing 1G ethanol plants suitable for integration, 2G ethanol production systems may be designed differently to optimize the economic conditions and maximize profitability. However, the complexity connected to the development of the most optimal production systems require improved knowledge and involvement of several actors from different competence areas, such as chemical and biochemical engineering, process design and integration and energy and environmental systems analysis, which may be a potential barrier.Three important results from the lignocellulosic ethanol study are: (i) the production systems could be far more complex and intelligently designed than previous studies show, (ii) the potential improvements consist of a large number of combinations of process integration options wich partly depends on specific local conditions, (iii) the environmental performance of individual systems may vary significantly due to systems design and local conditons.From the case study on gasification of solid biomass for the production of biomethane we find that one of the main advantages of this technology is its high efficiency in respect to converting biomass into fuels for transport. For future research we see a need for improvements within the gas up-grading section, including gas cleaning and gas conditioning, to obtain a more efficient process. A major challenge is to remove the tar before the methanation reaction.Three important results from the biomethane study are: (i) it is important not to crack the methane already produced in the syngas, which indicates a need for improved catalysts for selective tar cracking, (ii) there is a need for new gas separation techniques to facilitate the use of air oxidation agent instead of oxygen in the gasifier, and (iii) there is a need for testing the integrated process under realistic conditions, both at atmospheric and pressurized conditions.From the case study on black liquor gasification for the production of DME we find that the process has many advantages compared to other biofuel production options, such as the fact that black liquor is already partially processed and exists in a pumpable, liquid form, and that the process is pressurised and tightly integrated with the pulp mill, which enhances fuel production efficiency. However, to achieve commercial status, some challenges still remain, such as demonstrating that materials and plant equipment meet the high availability required when scaling up to industrial size in the pulp mill, and also proving that the plant can operate according to calculated heat and material balances. Three important results from the DME study are: (i) that modern chemical pulp mills, having a potential surplus of energy, could become important suppliers of renewable fuels for transport, (ii) there is a need to demonstrate that renewable DME/methanol will be proven to function in large scale, and (iii) there is still potential for technology improvements and enhanced energy integration.Although quantitative improvement potentials are given in the three biofuel production cases, it is not obvious how these potentials would affect WTT values, since the biofuel production processes are complex and changing one parameter impacts other parameters. The improvement potentials are therefore discussed qualitatively. From the entire study we have come to agree on the following common conclusions: (i) research and development in Sweden within the three studied 2G biofuel production technologies is extensive, (ii) in general, the processes, within the three cases, work well at pilot and demonstration scale and are now in a phase to be proven in large scale, (iii) there is still room for improvement although some processes have been known for decades, (iv) the biofuel production processes are complex and site specific and process improvements need to be seen and judged from a broad systems perspective (both within the production plant as well as in the entire well-to-tank perspective), and (v) the three studied biofuel production systems are complementary technologies. Futher, the process of conducting this study is worth mentioning as a result itself, i.e. that many different actors within the field have proven their ability and willingness to contribute to a common report, and that the cooperation climate was very positive and bodes well for possible future collaboration within the framework of the f3 center.Finally, judging from the political ambitions it is clear that the demand for renewable fuels will significantly increase during the coming decade. This will most likely result in opportunities for a range of biofuel options. The studied biofuel options all represent 2G biofuels and they can all be part of the solution to meet the increased renewable fuel demand.
|
|
4. |
- Caesar, Ulla, et al.
(author)
-
A sense of being rejected : Patients’ lived experiences of cancelled knee or hip replacement surgery
- 2021
-
In: Scandinavian Journal of Caring Sciences. - : John Wiley & Sons. - 0283-9318 .- 1471-6712.
-
Journal article (peer-reviewed)abstract
- BackgroundGrowing care queues, reduced access to care and cancelled surgery are realities for some patients being treated with total hip or knee replacement surgery in Sweden.Most of the patients on the waiting lists have experienced pain and limited motion for a varying period of time, with a negative effect on their everyday lives. Overbooked surgical schedules are already contributing to the lengthy waiting times, but, with the addition of cancellations, longer waiting times will increase still further and may affect patients’ well‐being.MethodsIn the present study, we aimed to illuminate the experience of having planned surgery cancelled, based on narratives from 10 participants. The interview transcriptions were analysed using a phenomenological hermeneutic approach.ResultsThe comprehensive analyses revealed that the participants described the agony of being deselected and the additional impression of being excluded. Metaphors of being damaged and feeling physical pain were used and the interpretations referred to the cancellations as unpleasant. Additionally, the important relationship and the trust between the health workers and the patient were negatively affected by the cancellation.ConclusionAfter the cancellation, the participants expressed being vulnerable and from their perspective the cancelled surgery affected them deeply; in fact, much more than the healthcare workers appeared to understand. Therefore, information around the cancellation must be given respectfully and with dignity, in a dialogue between the patient and the healthcare workers. Taken together, to enable an opportunity to be involved in the continued care. The cancellations should be seen as an interruption, in which the patients’ chance of living a pain‐free, active life is postponed.
|
|
5. |
- Dahlborg Lyckhage, Elisabeth, 1956-, et al.
(author)
-
Competing discourses in palliative care.
- 2010
-
In: Supportive care in cancer : official journal of the Multinational Association of Supportive Care in Cancer. - : Springer Science and Business Media LLC. - 1433-7339. ; 18:5, s. 573-582
-
Journal article (peer-reviewed)abstract
- BACKGROUND: Palliative care focuses on early identification as well as prevention and alleviation of suffering. Previous studies have established that palliative care is a disciplinary area in a state of transformation due to the involvement of different professional categories and that nursing care in the palliative context is influenced by the dominance of the medical perspective. AIM: This study aimed to describe palliative care from a nursing perspective prior to the implementation of a palliative care programme. PATIENTS AND METHODS: The approach was inspired by the ethnographic method and a constructionist perspective was used as a theoretical framework, as the focus was on existing palliative care discourses. Field studies were conducted on a ward where palliative care was provided to patients at the end of life. Approval for the study was granted by the Ethics Committee at Sahlgrenska Academy. Data were collected by means of participant field studies, informal deliberations and other relevant documents. MAIN RESULTS: Four different discourses were discerned: caring, non-caring, curing and the organisation. CONCLUSIONS: The ethos on the ward was strongly linked to the medical discourse. We consider that a prerequisite for the organisation of palliative care is an expressed caring perspective based on the patients' experiences of suffering, which perspective is lacking in the curing and organisational discourses.
|
|
6. |
|
|
7. |
|
|
8. |
- Kokkinakis, Dimitrios, 1965, et al.
(author)
-
Contextualisation of functional symptoms in primary health care
- 2012
-
In: The 5th GENEVA Conference on Person-Centered Medicine. Geneva, Switzerland..
-
Conference paper (other academic/artistic)abstract
- Background: a number of patients consulting primary health care have physical symptoms that may be labeled “medically unexplained”, i.e. absence of a demonstrable organic etiology. Common functional somatic symptoms (FSS) are irritable bowel, tension headache and chronic fatigue. FSS-patients are generally frustrated with the inability of health care to alleviate their illness. Health care staff often also feel frustration. The communication between patient and care giver is the key for coming to terms with the problem. Objective: to investigate how complex, vague and long-standing symptoms with no identified organic cause are put into context, interpreted and acted upon in primary health-care interactions. Two types of interventions are envisaged (i) methods for early identification of patients at risk of entering a vicious circle of functional symptoms and (ii) methods for re-interpreting symptoms in alternative and more purposeful ways. Methods: the project studies interactions between patients and nurses giving advice over telephone, consultations between patients and physicians, interviews and study patients' medical case notes. Eligible patients (18-65 y.o.) contact their primary health care centre by telephone, have had at least eight physical consultations with nurses or physicians in the last 12 months and if a majority of the symptoms within this time span had no clear organic or psychiatric cause. The project contains a number of subprojects, according to the type of data collected. Several methods of analysis will be used, mainly critical discourse analysis, phenomenologic-hermeneutic and computation linguistic analyses. (Expected) Results: using the collected data, we describe characteristics of the communication that takes place in these settings and the way symptoms and diseases are represented. This will facilitate the development of future interventions aimed at decreasing the morbidity due to FSS and give further insights into the problem.
|
|
9. |
- Lidén, Eva, 1955, et al.
(author)
-
Att samordna och planera med personal i annan organisation
- 2010
-
In: Att bli sjuksköterska - en introduktion till yrke och ämne. - : Studentlitteratur. - 9789144054117 ; , s. 223-238
-
Book chapter (other academic/artistic)abstract
- Kapitlet handlar om samverkan mellan olika vårdgivare och yrkesgrupper inom hälso- och sjukvården. Framför allt handlar kapitlet om vilka möjligheter och problem som finns när de gäller att åstadkomma en omvårdnad som kännetecknas av en helhetssyn när patienter skrivs ut från sjukhus och behöver fortsatt vård i det egna hemmet eller i kommunens särskilda boenden. Att bidra till denna samverkan är en viktig uppgift och en utmaning för alla sjuksköterskor oavsett om du arbetar på sjukhus eller inom hemsjukvården.
|
|
10. |
|
|