| 1. |
- Fan, Xuelong, et al.
(author)
-
Effects of sensor types and angular velocity computational methods in field measurements of occupational upper arm and trunk postures and movements
- 2021
-
In: Sensors. - : MDPI AG. - 1424-8220. ; 21:16
-
Journal article (peer-reviewed)abstract
- Accelerometer-based inclinometers have dominated kinematic measurements in previous field studies, while the use of inertial measurement units that additionally include gyroscopes is rapidly increasing. Recent laboratory studies suggest that these two sensor types and the two commonly used angular velocity computational methods may produce substantially different results. The aim of this study was, therefore, to evaluate the effects of sensor types and angular velocity computational methods on the measures of work postures and movements in a real occupational setting. Half-workday recordings of arm and trunk postures, and movements from 38 warehouse workers were compared using two sensor types: accelerometers versus accelerometers with gyroscopes—and using two angular velocity computational methods, i.e., inclination velocity versus generalized velocity. The results showed an overall small difference (<2° and value independent) for posture percentiles between the two sensor types, but substantial differences in movement percentiles both between the sensor types and between the angular computational methods. For example, the group mean of the 50th percentiles were for accelerometers: 71°/s (generalized velocity) and 33°/s (inclination velocity)—and for accelerometers with gyroscopes: 31°/s (generalized velocity) and 16°/s (inclination velocity). The significant effects of sensor types and angular computational methods on angular velocity measures in field work are important in inter-study comparisons and in comparisons to recommended threshold limit values.
|
|
| 2. |
- Forsman, Mikael, Professor, et al.
(author)
-
Mind the gap – development of conversion models between accelerometer- and IMU-based measurements of arm and trunk postures and movements in warehouse work
- 2022
-
In: Applied Ergonomics. - : Elsevier BV. - 0003-6870 .- 1872-9126. ; 105
-
Journal article (peer-reviewed)abstract
- Sensor type (accelerometers only versus inertial measurement units, IMUs) and angular velocity computational method (inclination versus generalized velocity) have been shown to affect the measurements of arm and trunk movements. This study developed models for conversions between accelerometer and IMU measurements of arm and trunk inclination and between accelerometer and IMU measurements of inclination and generalized (arm) velocities. Full-workday recordings from accelerometers and IMUs of arm and trunk postures and movements from 38 warehouse workers were used to develop 4 angular (posture) and 24 angular velocity (movement) conversion models for the distributions of the data. A power function with one coefficient and one exponent was used, and it correlated well (r2 > 0.999) in all cases to the average curves comparing one measurement with another. These conversion models facilitate the comparison and merging of measurements of arm and trunk movements collected using the two sensor types and the two computational methods.
|
|
| 3. |
- Lind, Carl Mikael, et al.
(author)
-
Development and evaluation of RAMP II - a practitioner’s tool for assessing musculoskeletal disorder risk factors in industrial manual handling
- 2020
-
In: Ergonomics. - : Informa UK Limited. - 0014-0139 .- 1366-5847. ; 63:4, s. 477-504
-
Journal article (peer-reviewed)abstract
- RAMP II is an observation-based tool developed for assessing a wide range of musculoskeletal disorder risk factors related to industrial manual handling. RAMP II, which is part of the RAMP tool, is based on research studies and expert judgments. The assessment relies mainly on direct or video observations of the work being assessed, but additionally on measured push/pull forces and weights of handled objects, and on perceived workload and discomfort. Over 80 practitioners participated in the development of the tool. According to the evaluations, 73% of the assessment items evaluated had acceptable reliability, and the majority of the potential end-users reported that RAMP II is usable for assessing risks and as a decision base. It is concluded that this study provides support that RAMP II is usable for risk assessment of musculoskeletal disorder risk factors in industrial manual handling. Practitioner summary: RAMP II is an observation-based assessment tool for screening and assessing major musculoskeletal exposures in industrial manual handling jobs. Over 80 practitioners participated in the development of the tool. This study provides support that RAMP II is usable for risk assessment of musculoskeletal disorder risk factors in industrial manual handling. Abbreviations: CTS: carpal tunnel syndrome; HARM: the Hand Arm Risk Assessment method; IMP: intramuscular pressure; κw: linearly weighted kappa; LBD: lower back disorders; LBP: lower back pain; MAWL: maximum acceptable weight of lift; MHO: manual handling operations; MSD: musculoskeletal disorder; MNSD: neck-shoulder disorder; NSP: neck-shoulder pain; OCRA: the Occupational Repetitive Action methods; OHS: occupational health and safety; PABAK: prevalence and bias adjusted kappa; p0: proportion of agreement; RAMP: Risk Assessment and Management tool for manual handling Proactively; ROM: range of motion; RPL: risk and priority level; RSI: the Revised Strain Index; RULA: the Rapid Upper Limb Assessment; SWEA: Swedish Work Environment Authority; UEMSDs: upper-extremity work-related musculoskeletal disorders; WMSD: work-related musculoskeletal disorder; WRMSD: work-related musculoskeletal disorder; workday8h: eight hours workday.
|
|
| 4. |
- Lind, Carl Mikael, et al.
(author)
-
Prevention of work-related ill-health
- 2018
-
In: 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).
-
Conference paper (peer-reviewed)abstract
- This paper presents strategies targeting prevention of work-related ill-health, and how the use of smart workwear (wearables) can facilitate these strategies
|
|
| 5. |
- Lind, Carl Mikael, et al.
(author)
-
Prevention of Work: Related Musculoskeletal Disorders Using Smart Workwear – The Smart Workwear Consortium
- 2019
-
In: Human Systems Engineering and Design. - Cham : Springer. - 9783030020521 - 9783030020538 ; 876, s. 477-483
-
Conference paper (peer-reviewed)abstract
- Adverse work-related physical exposures such as repetitive movements and awkward postures have negative health effects and lead to large financial costs. To address these problems, a multi-disciplinary consortium was formed with the aim of developing an ambulatory system for recording and analyzing risks for musculoskeletal disorders utilizing textile integrated sensors as part of the regular workwear. This paper presents the consortium, the Smart Workwear System, and a case study illustrating its potential to decrease adverse biomechanical exposure by promoting improved work technique.
|
|
| 6. |
|
|
| 7. |
- Lind, Carl Mikael, et al.
(author)
-
Reducing postural load in order picking through a smart workwear system using real-time vibrotactile feedback
-
Other publication (other academic/artistic)abstract
- Vibrotactile feedback training may be one possible method for interventions that target at learning better work technique and improving postures in manual handling. The aim of this study was to evaluate the effect of real-time vibrotactile feedback using a smart workwear system for work postures intervention in industrial order picking. Fifteen workers at an industrial manufacturing plant performed order-picking tasks, in which the vibrotactile feedback was used for postural training at work. The trunk and upper arm postures were recorded by the system. Questionnaires and semi-structured interviews were conducted about the users’ experience of the system. The results showed reduced time in adverse postures for the trunk and upper arms when the workers received feedback, and for trunk postures also after feedback withdrawal. The workers perceived the system as usable, comfortable and supportive for learning.
|
|
| 8. |
- Lind, Carl Mikael, et al.
(author)
-
Wearable Motion Capture Devices for the Prevention of Work-Related Musculoskeletal Disorders in Ergonomics-An Overview of Current Applications, Challenges, and Future Opportunities
- 2023
-
In: Sensors. - : MDPI AG. - 1424-8220. ; 23:9
-
Research review (peer-reviewed)abstract
- Work-related musculoskeletal disorders (WMSDs) are a major contributor to disability worldwide and substantial societal costs. The use of wearable motion capture instruments has a role in preventing WMSDs by contributing to improvements in exposure and risk assessment and potentially improved effectiveness in work technique training. Given the versatile potential for wearables, this article aims to provide an overview of their application related to the prevention of WMSDs of the trunk and upper limbs and discusses challenges for the technology to support prevention measures and future opportunities, including future research needs. The relevant literature was identified from a screening of recent systematic literature reviews and overviews, and more recent studies were identified by a literature search using the Web of Science platform. Wearable technology enables continuous measurements of multiple body segments of superior accuracy and precision compared to observational tools. The technology also enables real-time visualization of exposures, automatic analyses, and real-time feedback to the user. While miniaturization and improved usability and wearability can expand the use also to more occupational settings and increase use among occupational safety and health practitioners, several fundamental challenges remain to be resolved. The future opportunities of increased usage of wearable motion capture devices for the prevention of work-related musculoskeletal disorders may require more international collaborations for creating common standards for measurements, analyses, and exposure metrics, which can be related to epidemiologically based risk categories for work-related musculoskeletal disorders.
|
|
| 9. |
- Mahdavian, Nafise, et al.
(author)
-
Effect of Giving Feedback on Postural Working Techniques
- 2018
-
In: Advances in Manufacturing Technology XXXII. - Amsterdam, Netherlands : IOS Press. - 9781614999010 - 9781614999027 ; , s. 247-252, s. 247-252
-
Conference paper (peer-reviewed)abstract
- Working postures and movements affect work efficiency and musculoskeletal health. To reduce the biomechanical exposure in physically demanding settings, working techniques may be improved by giving instant ergonomic feedback to the operator. This study investigates if feedback can be used to decrease adverse postures and movements in assembly work. A prototype solution of a smart textile workwear was used on a trainee assembly line. Posture and movement signals of 24 trainee operators were sampled via the workwear, transferred to a tablet for analyses and used to provide feedback suggesting improvements of work technique. Two modes of feedback were tested. Every participant’s work technique was measured before and after receiving the feedback and the results were compared. For upper arm elevation angle ≥60, behaviour change is indicated, supporting a positive work technique change, and indicated a future usefulness of technical automatic feedback for operators.
|
|
| 10. |
- Bergström, Göran, 1964, et al.
(author)
-
Body weight at age 20 and in midlife is more important than weight gain for coronary atherosclerosis: Results from SCAPIS.
- 2023
-
In: Atherosclerosis. - : Elsevier BV. - 1879-1484 .- 0021-9150. ; 373, s. 46-54
-
Journal article (peer-reviewed)abstract
- Elevated body weight in adolescence is associated with early cardiovascular disease, but whether this association is traceable to weight in early adulthood, weight in midlife or to weight gain is not known. The aim of this study is to assess the risk of midlife coronary atherosclerosis being associated with body weight at age 20, body weight in midlife and body weight change.We used data from 25,181 participants with no previous myocardial infarction or cardiac procedure in the Swedish CArdioPulmonary bioImage Study (SCAPIS, mean age 57 years, 51% women). Data on coronary atherosclerosis, self-reported body weight at age 20 and measured midlife weight were recorded together with potential confounders and mediators. Coronary atherosclerosis was assessed using coronary computed tomography angiography (CCTA) and expressed as segment involvement score (SIS).The probability of having coronary atherosclerosis was markedly higher with increasing weight at age 20 and with mid-life weight (p<0.001 for both sexes). However, weight increase from age 20 until mid-life was only modestly associated with coronary atherosclerosis. The association between weight gain and coronary atherosclerosis was mainly seen in men. However, no significant sex difference could be detected when adjusting for the 10-year delay in disease development in women.Similar in men and women, weight at age 20 and weight in midlife are strongly related to coronary atherosclerosis while weight increase from age 20 until midlife is only modestly related to coronary atherosclerosis.
|
|
