1. |
- Blaudeck, Thomas, et al.
(author)
-
Biocomputation Using Molecular Agents Moving in Microfluidic Channel Networks : An Alternative Platform for Information Technology
- 2022
-
In: Cyber-Physical Systems : Intelligent Models and Algorithms - Intelligent Models and Algorithms. - Cham : Springer International Publishing. - 2198-4190 .- 2198-4182. - 9783030951153 - 9783030951160 ; 417, s. 15-27
-
Book chapter (peer-reviewed)abstract
- Deficiencies in software or computer chips cause computers or smartphones to crash and allow hackers to steal passwords. Automated test procedures could avoid these problems. However, the computing power and cooling requirements of conventional computers increase exponentially with the size of the problem, so that the technological limits for solving these problems will soon be reached. The EU project Bio4Comp aims to develop concepts for a bio-computer to help overcome these two main problems. Compared to conventional computers, computers based on biological molecular motors only consume a fraction of the energy per arithmetic operation and scale very well for problems that can be parallelized (“multitasking”). In this article, the topic network-based biocomputation (NBC) i.e. computing with biological molecules as agents that are driven by molecular motors in microfluidic networks, is presented as an alternative approach to computing, data processing, and information technology.
|
|
2. |
- Boyle, Aimee L., et al.
(author)
-
Squaring the Circle in Peptide Assembly: From Fibers to Discrete Nanostructures by de Novo Design
- 2012
-
In: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 1520-5126 .- 0002-7863. ; 134:37, s. 15457-15467
-
Journal article (peer-reviewed)abstract
- The design of bioinspired nanostructures and materials of defined size and shape is challenging as it pushes our understanding of biomolecular assembly to its limits. In such endeavors, DNA is the current building block of choice because of its predictable and programmable self-assembly. The use of peptide- and protein-based systems, however, has potential advantages due to their more-varied chemistries, structures and functions, and the prospects for recombinant production through gene synthesis and expression. Here, we present the design and characterization of two complementary peptides programmed to form a parallel heterodimeric coiled coil, which we use as the building blocks for larger, supramolecular assemblies. To achieve the latter, the two peptides are joined via peptidic linkers of variable lengths to produce a range of assemblies, from flexible fibers of indefinite length, through large colloidal-scale assemblies, down to closed and discrete nanoscale objects of defined stoichiometry. We posit that the different modes of assembly reflect the interplay between steric constraints imposed by short linkers and the bulk of the helices, and entropic factors that favor the formation of many smaller objects as the linker length is increased. This approach, and the resulting linear and proteinogenic polypeptides, represents a new route for constructing complex peptide-based assemblies and biomaterials.
|
|
3. |
- Bromley, Elizabeth H. C., et al.
(author)
-
The Tumbleweed: towards a synthetic protein motor
- 2009
-
In: HFSP Journal. - : Informa UK Limited. - 1955-2068. ; 3:3, s. 204-212
-
Journal article (peer-reviewed)abstract
- Biomolecular motors have inspired the design and construction of artificial nanoscale motors and machines based on nucleic acids, small molecules, and inorganic nanostructures. However, the high degree of sophistication and efficiency of biomolecular motors, as well as their specific biological function, derives from the complexity afforded by protein building blocks. Here, we discuss a novel bottom-up approach to understanding biological motors by considering the construction of synthetic protein motors. Specifically, we present a design for a synthetic protein motor that moves along a linear track, dubbed the "Tumbleweed." This concept uses three discrete ligand-dependent DNA-binding domains to perform cyclically ligand-gated, rectified diffusion along a synthesized DNA molecule. Here we describe how de novo peptide design and molecular biology could be used to produce the Tumbleweed, and we explore the fundamental motor operation of such a design using numerical simulations. The construction of this and more sophisticated protein motors is an exciting challenge that is likely to enhance our understanding of the structure-function relationship in biological motors. [DOI: 10.2976/1.3111282]
|
|
4. |
- Burke, Adam, et al.
(author)
-
InAs Nanowire Transistors with Multiple, Independent Wrap-Gate Segments.
- 2015
-
In: Nano Letters. - : American Chemical Society (ACS). - 1530-6992 .- 1530-6984. ; 15:5, s. 2836-2843
-
Journal article (peer-reviewed)abstract
- We report a method for making horizontal wrap-gate nanowire transistors with up to four independently controllable wrap-gated segments. While the step up to two independent wrap-gates requires a major change in fabrication methodology, a key advantage to this new approach, and the horizontal orientation more generally, is that achieving more than two wrap-gate segments then requires no extra fabrication steps. This is in contrast to the vertical orientation, where a significant subset of the fabrication steps needs to be repeated for each additional gate. We show that cross-talk between adjacent wrap-gate segments is negligible despite separations less than 200 nm. We also demonstrate the ability to make multiple wrap-gate transistors on a single nanowire using the exact same process. The excellent scalability potential of horizontal wrap-gate nanowire transistors makes them highly favorable for the development of advanced nanowire devices and possible integration with vertical wrap-gate nanowire transistors in 3D nanowire network architectures.
|
|
5. |
- Carrad, Damon J., et al.
(author)
-
Electron-Beam Patterning of Polymer Electrolyte Films To Make Multiple Nanoscale Gates for Nanowire Transistors
- 2014
-
In: Nano Letters. - : American Chemical Society (ACS). - 1530-6992 .- 1530-6984. ; 14:1, s. 94-100
-
Journal article (peer-reviewed)abstract
- We report an electron-beam based method for the nanoscale patterning of the poly(ethylene oxide)/LiClO4 polymer electrolyte. We use the patterned polymer electrolyte as a high capacitance gate dielectric in single nanowire transistors and obtain subthreshold swings comparable to conventional metal/oxide wrap-gated nanowire transistors. Patterning eliminates gate/contact overlap, which reduces parasitic effects and enables multiple, independently controllable gates. The method's simplicity broadens the scope for using polymer electrolyte gating in studies of nanowires and other nanoscale devices.
|
|
6. |
- Chen, I. Ju, et al.
(author)
-
Conduction Band Offset and Polarization Effects in InAs Nanowire Polytype Junctions
- 2017
-
In: Nano Letters. - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 17:2, s. 902-908
-
Journal article (peer-reviewed)abstract
- Although zinc-blende (ZB) and wurtzite (WZ) structures differ only in the atomic stacking sequence, mixing of crystal phases can strongly affect the electronic properties, a problem particularly common to bottom up-grown nanostructures. A lack of understanding of the nature of electronic transport at crystal phase junctions thus severely limits our ability to develop functional nanowire devices. In this work we investigated electron transport in InAs nanowires with designed mixing of crystal structures, ZB/WZ/ZB, by temperature-dependent electrical measurements. The WZ inclusion gives rise to an energy barrier in the conduction band. Interpreting the experimental result in terms of thermionic emission and using a drift-diffusion model, we extracted values for the WZ/ZB band offset, 135 ± 10 meV, and interface sheet polarization charge density on the order of 10-3 C/m2. The extracted polarization charge density is 1-2 orders of magnitude smaller than previous experimental results, but in good agreement with first principle calculation of spontaneous polarization in WZ InAs. When the WZ length is reduced below 20 nm, an effective barrier lowering is observed, indicating the increasing importance of tunneling transport. Finally, we found that band-bending at ZB/WZ junctions can lead to bound electron states within an enclosed WZ segment of sufficient length, evidenced by our observation of Coulomb blockade at low temperature. These findings provide critical input for modeling and designing the electronic properties of novel functional devices, such as nanowire transistors, where crystal polytypes are commonly found.
|
|
7. |
- Chen, I. Ju, et al.
(author)
-
Hot-Carrier Extraction in Nanowire-Nanoantenna Photovoltaic Devices
- 2020
-
In: Nano Letters. - : American Chemical Society (ACS). - 1530-6992 .- 1530-6984. ; 20:6, s. 4064-4072
-
Journal article (peer-reviewed)abstract
- Nanowires bring new possibilities to the field of hot-carrier photovoltaics by providing flexibility in combining materials for band engineering and using nanophotonic effects to control light absorption. Previously, an open-circuit voltage beyond the Shockley-Queisser limit was demonstrated in hot-carrier devices based on InAs-InP-InAs nanowire heterostructures. However, in these first experiments, the location of light absorption, and therefore the precise mechanism of hot-carrier extraction, was uncontrolled. In this Letter, we combine plasmonic nanoantennas with InAs-InP-InAs nanowire devices to enhance light absorption within a subwavelength region near an InP energy barrier that serves as an energy filter. From photon-energy- and irradiance-dependent photocurrent and photovoltage measurements, we find that photocurrent generation is dominated by internal photoemission of nonthermalized hot electrons when the photoexcited electron energy is above the barrier and by photothermionic emission when the energy is below the barrier. We estimate that an internal quantum efficiency up to 0.5-1.2% is achieved. Insights from this study provide guidelines to improve internal quantum efficiencies based on nanowire heterostructures.
|
|
8. |
- Chen, I. Ju, et al.
(author)
-
Thermoelectric Power Factor Limit of a 1D Nanowire
- 2018
-
In: Physical Review Letters. - 0031-9007. ; 120:17
-
Journal article (peer-reviewed)abstract
- In the past decade, there has been significant interest in the potentially advantageous thermoelectric properties of one-dimensional (1D) nanowires, but it has been challenging to find high thermoelectric power factors based on 1D effects in practice. Here we point out that there is an upper limit to the thermoelectric power factor of nonballistic 1D nanowires, as a consequence of the recently established quantum bound of thermoelectric power output. We experimentally test this limit in quasiballistic InAs nanowires by extracting the maximum power factor of the first 1D subband through I-V characterization, finding that the measured maximum power factors conform to the theoretical limit. The established limit allows the prediction of the achievable power factor of a specific nanowire material system with 1D electronic transport based on the nanowire dimension and mean free path. The power factor of state-of-the-art semiconductor nanowires with small cross section and high crystal quality can be expected to be highly competitive (on the order of mW/m K2) at low temperatures. However, they have no clear advantage over bulk materials at, or above, room temperature.
|
|
9. |
- Chen, Yang, et al.
(author)
-
Semiconductor nanowire array for transparent photovoltaic applications
- 2021
-
In: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 118:19
-
Journal article (peer-reviewed)abstract
- The surface area of a building that could potentially be used for Building Integrated Photovoltaics would increase dramatically with the availability of transparent solar cells that could replace windows. The challenge is to capture energy from outside the visible region (UV or IR) while simultaneously allowing a high-quality observation of the outside world and transmitting sufficient light in the visible region to satisfactorily illuminate the interior of the building. In this paper, we show both computationally and experimentally that InP nanowire arrays can have good transparency in the visible region and high absorption in the near-infrared region. We show experimentally that we can achieve mean transparencies in the visible region of 65% and the radiative limit of more than 10% based on measured absorption and calculated emission. Our results demonstrate that nanowire arrays hold promise as a method to achieve transparent solar cells, which would fulfill the requirements to function as windows. In addition, we show that by optical design and by designing the geometry of nanowire arrays, solar cells can be achieved that absorb/transmit at wavelengths that are not decided by the bandgap of the material and that can be tailored to specific requirements such as colorful windows.
|
|
10. |
- Craig, Erin M., et al.
(author)
-
Mechanochemical model for myosin V
- 2009
-
In: Proceedings of the National Academy of Sciences. - : Proceedings of the National Academy of Sciences. - 1091-6490 .- 0027-8424. ; 106:43, s. 18261-18266
-
Journal article (peer-reviewed)abstract
- A rigorous numerical test of a hypothetical mechanism of a molecular motor should model explicitly the diffusive motion of the motor's degrees of freedom as well as the transition rates between the motor's chemical states. We present such a Brownian dynamics, mechanochemcial model of the coarse-grain structure of the dimeric, linear motor myosin V. Compared with run-length data, our model provides strong support for a proposed strain-controlled gating mechanism that enhances processivity. We demonstrate that the diffusion rate of a detached motor head during motor stepping is self-consistent with known kinetic rate constants and can explain the motor's key performance features, such as speed and stall force. We present illustrative and realistic animations of motor stepping in the presence of thermal noise. The quantitative success and illustrative power of this type of model suggest that it will be useful in testing our understanding of a range of biological and synthetic motors.
|
|