1. |
- Cheng, Anying, et al.
(author)
-
Diagnostic performance of initial blood urea nitrogen combined with D-dimer levels for predicting in-hospital mortality in COVID-19 patients
- 2020
-
In: International Journal of Antimicrobial Agents. - : ELSEVIER. - 0924-8579 .- 1872-7913. ; 56:3
-
Journal article (peer-reviewed)abstract
- The crude mortality rate in critical pneumonia cases with coronavirus disease 2019 (COVID-19) reaches 49%. This study aimed to test whether levels of blood urea nitrogen (BUN) in combination with D-dimer were predictors of in-hospital mortality in COVID-19 patients. The clinical characteristics of 305 COVID19 patients were analysed and were compared between the survivor and non-survivor groups. Of the 305 patients, 85 (27.9%) died and 220 (72.1%) were discharged from hospital. Compared with discharged cases, non-survivor cases were older and their BUN and D-dimer levels were significantly higher ( P < 0.0 0 01). Least absolute shrinkage and selection operator (LASSO) and multivariable Cox regression analyses identified BUN and D-dimer levels as independent risk factors for poor prognosis. Kaplan-Meier analysis showed that elevated levels of BUN and D-dimer were associated with increased mortality (logrank, P 0.0 0 01). The area under the curve for BUN combined with D-dimer was 0.94 (95% CI 0.90-0.97), with a sensitivity of 85% and specificity of 91%. Based on BUN and D-dimer levels on admission, a nomogram model was developed that showed good discrimination, with a concordance index of 0.94. Together, initial BUN and D-dimer levels were associated with mortality in COVID-19 patients. The combination of BUN 4.6 mmol/L and D-dimer > 0.845 mu g/mL appears to identify patients at high risk of in-hospital mortality, therefore it may prove to be a powerful risk assessment tool for severe COVID-19 patients. (c) 2020 Elsevier B.V. and International Society of Chemotherapy. All rights reserved.
|
|
2. |
- Chen, Zhiwen, et al.
(author)
-
Interface engineering of NiS@MoS2 core-shell microspheres as an efficient catalyst for hydrogen evolution reaction in both acidic and alkaline medium
- 2021
-
In: Journal of Alloys and Compounds. - : ELSEVIER SCIENCE SA. - 0925-8388 .- 1873-4669. ; 853
-
Journal article (peer-reviewed)abstract
- Electrochemical splitting of water is one of the most reliable and effective ways for the sustainable production of pure hydrogen on a large scale, while the core of this technology lies in the development of highly active non-noble-metal-based electrocatalysts to lower the large dynamic overpotentials of electrode materials. Here, an interface engineering strategy is demonstrated to construct an efficient and stable catalyst based on NiS@MoS2 core-shell hierarchical microspheres for the hydrogen evolution reactions (HER). The ultrathin MoS2 nanosheets in-situ grow on the surface of NiS hierarchical micro-sized spheres constructed by porous nanoplates, endowing the composites with rich interfaces, well-exposed electroactive edges, high structural porosity and fast transport channels. These advantages are favorable for the improvement of catalytic sites and the transport of catalysis-relevant species. More importantly, the intimate contact between MoS2 nanosheets and NiS nanoplates synergistically favors the chemical sorption of hydrogen intermediates, thereby reducing the reaction barrier and accelerating the HER catalytic process. As a result, the optimized NiS@MoS2 catalyst manifests impressive HER activity and durability, with a low overpotential of 208 mV in 0.5 M H2SO4 and 146 mV in 1.0 M KOH at 10 mA cm(-2), respectively. This work not only provides an effective way to construct core-shell hierarchical microspheres but also a multiscale strategy to regulate the electronic structure of heterostructured materials for energy-related applications. (C) 2020 Elsevier B.V. All rights reserved.
|
|
3. |
- Huang, Shoushuang, et al.
(author)
-
An advanced electrocatalyst for efficient synthesis of ammonia based on chemically coupled NiS@MoS2 heterostructured nanospheres
- 2021
-
In: Sustainable Energy & Fuels. - : Royal Society of Chemistry. - 2398-4902. ; 5:10, s. 2640-2648
-
Journal article (peer-reviewed)abstract
- The electrochemical reduction of nitrogen, as a sustainable alternative to the known Haber-Bosch process, possesses promising application prospects in the development of renewable energy storage systems. However, the yield of NH3 and Faraday efficiency are usually very low owing to the loss of active electrocatalysts and competitive hydrogen evolution reactions. Herein, uniform NiS@MoS2 core-shell microspheres are controllably prepared as a potential catalyst for an ambient electrocatalytic N-2 reduction reaction. The NiS@MoS2 microspheres possess highly active intrinsic, sufficient accessible active sites, high structural porosity, and convenient transport channels, consequently boosting the transmission of electrons and mass. Additionally, the interfacial interaction between NiS and MoS2 facilitates electron transfer, which further improves the catalytic activity by optimizing the free energies of reaction intermediates. As a result, the titled NiS@MoS2 shows excellent electrochemical activity and selectivity, capable of achieving a relatively high NH3 yield of 9.66 mu g h(-1) mg(cat)(-1) at -0.3 V (vs. the reversible hydrogen electrode, RHE) and a high FE of 14.8% at -0.1 V vs. RHE in 0.1 M Na2SO4. The work demonstrated here may open a new avenue for the rational design and synthesis of catalysts for the electrochemical synthesis of ammonia.
|
|
4. |
- Liu, Huizeng, et al.
(author)
-
Estimating ultraviolet reflectance from visible bands in ocean colour remote sensing
- 2021
-
In: Remote Sensing of Environment. - : Elsevier BV. - 0034-4257 .- 1879-0704. ; 258
-
Journal article (peer-reviewed)abstract
- In recent years, ultraviolet (UV) bands have received increasing attention from the ocean colour remote sensing community, as they may contribute to improving atmospheric correction and inherent optical properties (IOPs) retrieval. However, most ocean colour satellite sensors do not have UV bands, and the accurate retrieval of UV remote sensing reflectance (Rrs) from UV satellite data is still a challenge. In order to address this problem, this study proposes a hybrid approach for estimating UV Rrs from the visible bands. The approach was implemented with two popular ocean colour satellite sensors, i.e. GCOM-C SGLI and Sentinel-3 OLCI. In situ Rrs collected globally and simulated Rrs spectra were used to develop UV Rrs retrieval models, and UV Rrs values at 360, 380 and 400 nm were estimated from visible Rrs spectra. The performances of the established models were evaluated using in situ Rrs and satellite data, and applied to a semi-analytical algorithm for IOPs retrieval. The results showed that: (i) UV Rrs retrieval models had low uncertainties with mean absolute percentage differences (MAPD) less than 5%; (ii) the model assessment with in situ Rrs showed high accuracy (r = 0.92–1.00 and MAPD = 1.11%–10.95%) in both clear open ocean and optically complex waters; (iii) the model assessment with satellite data indicated that model-estimated UV Rrs were more consistent with in situ values than satellite-derived UV Rrs; and (iv) model-estimated UV Rrs may improve the decomposition accuracy of absorption coefficients in semi-analytical IOPs algorithm. Thus, the proposed method has great potentials for reconstructing UV Rrs data and improving IOPs retrieval for historical satellite sensors, and might also be useful for UV-based atmospheric correction algorithms.
|
|
5. |
- Liu, Huizeng, et al.
(author)
-
Evaluation of Ocean Color Atmospheric Correction Methods for Sentinel-3 OLCI Using Global Automatic In Situ Observations
- 2022
-
In: IEEE Transactions on Geoscience and Remote Sensing. - 0196-2892 .- 1558-0644. ; 60
-
Journal article (peer-reviewed)abstract
- The Ocean and Land Color Instrument (OLCI) on Sentinel-3 is one of the most advanced ocean color satellite sensors for aquatic environment monitoring. However, limited studies have been focused on a comprehensive assessment of atmospheric correction (AC) methods for OLCI. In an attempt to fill the gap, this study evaluated seven different AC methods for OLCI using global automatic in situ observations from Aerosol Robotic Network-Ocean Color (AERONET-OC). Results showed that the POLYnomial-based algorithm applied to MERIS (POLYMER) had the best performance for bands with wavelength ≤ 443 nm, and the SeaDAS method based on 779 and 865 nm was the best for longer spectral bands; however, SeaDAS (SeaWiFS Data Analysis System) processing algorithm based on 779 and 1020 nm, as well as 865 and 1020 nm, obtained degraded AC performance; Case 2 Regional CoastColor (C2RCC) also produced large uncertainties; Baseline AC (BAC) method might be better than SeaDAS method; and simple subtraction method was the worst except for turbid waters. POLYMER and C2RCC underestimated high remote sensing reflectance (Rrs) at red and green bands; SeaDAS method based on 779 and 865 nm held an advantage for clear waters over the other two band combinations, while their difference turned small for turbid waters. AC uncertainties generally impacted the performance of chlorophyll retrievals. POLYMER outperformed other methods for chlorophyll retrieval. This study provides a good reference for selecting a suitable AC method for aquatic environment monitoring with Sentinel-3 OLCI.
|
|
6. |
- Liu, Qingquan, et al.
(author)
-
Regeneration Research of Porous Magnetic Microspheres during Treatment of Wastewater Containing Cationic Dyes
- 2010
-
In: Separation science and technology (Print). - : Informa UK Limited. - 0149-6395 .- 1520-5754. ; 45:16, s. 2345-2349
-
Journal article (peer-reviewed)abstract
- The application feasibility of porous magnetic microspheres in the removal of cationic dyes from wastewater was investigated. Various desorption solutions were employed for the recovery of cationic dyes from absorbents and regeneration of porous magnetic microspheres. The results showed that 1M NaCl or 1M KCl in water/methanol co-solvent had excellent desorption ability for methyl violet. This fact was further demonstrated in the removal cationic gold yellow from its aqueous solution. Overall, this provided a simple methodology for the treatment of wastewater containing cationic dyes and the regeneration of porous magnetic microspheres.
|
|
7. |
- Liu, Qingquan, et al.
(author)
-
Templated preparation of porous magnetic microspheres and their application in removal of cationic dyes from wastewater
- 2010
-
In: Journal of Hazardous Materials. - : Elsevier BV. - 0304-3894 .- 1873-3336. ; 181:1-3, s. 586-592
-
Journal article (peer-reviewed)abstract
- Porous magnetic microspheres with large particle size (350-450 mu m) were prepared with sulfonated macroporous polydivinylbenzene as a template. The preparation process included ferrous ion exchange and following oxidation by hydrogen peroxide. The results showed that the weight fraction of magnetic nanoparticles exceeded 20 wt% in microspheres after the preparation process was repeated three times. X-ray diffraction profiles indicated that the crystalline phase of as-formed magnetic nanoparticles was magnetite (Fe3O4). TEM images revealed rod-like magnetite crystal after the first oxidation cycle, however, the crystal morphologies were transferred into random shape after more oxidation cycles. The applicability of porous magnetic microspheres for removal of cationic dyes from water was also explored. The results exhibited that basic fuchsin and methyl violet could be quickly removed from water with high efficiency. More importantly, the magnetic microspheres could be easily regenerated and repeatedly employed for wastewater treatment. Therefore, a novel methodology was provided for fast removal cationic dyes from wastewater.
|
|
8. |
- Zeng, Ruifeng, et al.
(author)
-
Can noninvasive hemoglobin measurement reduce the need for preoperative venipuncture in pediatric outpatient surgery?
- 2017
-
In: Pediatric Anaesthesia. - : WILEY. - 1155-5645 .- 1460-9592. ; 27:11, s. 1131-1135
-
Journal article (peer-reviewed)abstract
- Background: Noninvasive measurements of hemoglobin in the pediatric perioperative setting could be helpful to avoid venipunctures in children. The present study aims to evaluate this by using a noninvasive device for hemoglobin determination. We compared noninvasively obtained hemoglobin with laboratory hemoglobin concentrations in children during their preoperative assessment.Methods: In an observational study, 122 nonanemic children (age 4.21.6years) who were scheduled to undergo different surgical procedures under general anesthesia were included. In their preoperative preparations, single invasive blood samples for laboratory hemoglobin concentrations were routinely taken following hospital policy and compared to simultaneous noninvasive determinations of hemoglobin. A preoperative invasive value 9g/dL would have caused cancelation of surgery and implied further investigations.Results: A Bland-Altman plot showed that the average difference between noninvasively obtained hemoglobin and laboratory hemoglobin concentration was -0.44g/dL (bias) with a standard deviation of the mean bias of 1.04g/dL. A hemoglobin error grid showed that the noninvasive device could identify almost all invasive hemoglobin values >9g/dL. In total, there were 4 false-positive values where noninvasively obtained hemoglobin observations were below while the paired invasive values were above 9g/dL.Conclusion: The data in this pediatric setting suggest that the device may eliminate the need for venipuncture in nonanemic children.
|
|